How to mix Plaster of Paris

How to mix Plaster of Paris - Satyen Sharma

Рет қаралды 471,558

7 жыл бұрын

Here I'm sharing not only the perfect ratio in which Water and Plaster of Paris should be mixed but also which component should go first.
Before knowing how to make Plaster of Paris mix it is important to know mixing materials behavior first. Otherwise no matter how precise one is can't get the desired result.
It seems very simple mixing water with Plaster of Paris, but the twist is which everyone ignores that what should be mixed in what. Either A into B or B into A.
Because that will change the output of composition.
Here I'm sharing side by side what happens when one compound is put into other and vice versa.
What are the pros and cons of the same? Based on which one can decide what desired result one is looking for.
This tutorial is the best guide for making perfect
Plaster of Paris Solution.
Moreover, attached are some other links showcasing how this mixture can be used to create artworks such as a chocolate bottle.
• Valentine Day Gift
/ @satyensharma960
FACEBOOK PAGE:
/ creativeants2016
WEBSITE:
creativeants.co.in/
I hope this tutorial gives a better understanding of the components and guidance how to use it.
Thanks.

Пікірлер: 188

@_mylastname 3 жыл бұрын

Great lil test. Definetly a difference, will be putting this to use. Thanks!

@dariaanimalutele_ei3422 Жыл бұрын

Never thought of this , thank you , so first the water 😊🙏

@jessejohnson159 3 жыл бұрын

I have actually done this both ways, depending on the volume needed. Small volume needed and mixed on a flat surface I do the powder first and slowly add water sometimes even using an eye dropper. Larger volumes in a bowl, adding powder to a preselected amount of water, letting it soak and absorbed till it's ready to mix and use. However, looking at the amount of volume of water in your cups, it did not look like it was filled to the same level as the powder in one cup. Optical illusion?

@jonsnow4894 2 жыл бұрын

Thank you for saving me,i really need this

@oddity4650 3 жыл бұрын

Amazing explanation of comparing the differences.

@destinydeavila524 5 жыл бұрын

Great video! Thank you!

@tanyaknipe7174 3 жыл бұрын

Thank you for your advice much appreciated.

@nutangupta63 5 жыл бұрын

gyan dene se gyan badhta hai sahi jankari ke liye dhanyavad

@adhrikathejus1533 3 жыл бұрын

best vidio i have ever seen about plaster of paris

@debasmitaroy6954 11 ай бұрын

Thank you so much for the process Sir.

@artandcraftbypadmag6832 2 жыл бұрын

I was always making mistakes now I know why.. thanks for the video 👍👍👍💕

@hellenkamau3755 2 жыл бұрын

This is a very informative video. I've been looking this directions and those that you've given in the comment section. Your followers have some great insights too. Now, what would be the right consistency/method for decorative vases/pots. Secondly, what are the right ratios using white cement, white glue and water for vases. I would like to make them sturdy for selling. Thanks in advance.

@taniagreenia4762 4 жыл бұрын

For my projects, I think the second option is more suitable. Thanks for showing the difference.

@user-us3pi4es5b 6 ай бұрын

Waste of time!!!

@nishhhhhhhhhhhh Жыл бұрын

Thank you, I'm using first method for my diy!

@Jackeline-gi3gp 8 ай бұрын

Great review! Thank you!!!

@lindaschaefer7917 4 жыл бұрын

Nicely done, thank you.

@lolomahoward6894 2 жыл бұрын

Hello, is there a food safe or close to food safe acrylic sealer that I can use for plaster of paris?

@johnbubu8310 2 жыл бұрын

Thank you for this video!

@ckinc89 3 жыл бұрын

Vry mch TQ for th show,. ITS' A vry gud info👍

@oilpntr 4 жыл бұрын

Great instructions

@peacefulscrimp5183 26 күн бұрын

Great video 👍

@xxwashy Жыл бұрын

Thank you!! Really helpful

@jaymehamilton4580 4 жыл бұрын

GREAT VIDEO, I'm new to plaster of parris, this is fantastic info. ty

@rafiudauda8744 3 жыл бұрын

I like it is vary nice to know all this how to use the plaster of Paris🤔

@pravashdas3817 5 жыл бұрын

nice video and great tips

@kuchinita 4 жыл бұрын

I'm definitely following the first option for my diy pots. Thanks for a smooth and non complicated tutorial!

@pusaersd5317 3 жыл бұрын

What is the best option for pot making?

@somigera8378 Ай бұрын

Very nicely explained 👍🏻👍🏻

@tobyward6628 4 жыл бұрын

Cool, a very useful video.

@ramonadavis3411 3 жыл бұрын

Thank you! I did not know this. To me it is interesting, that just by how you do the water can get two textures.

@patriciaweaver7735 5 жыл бұрын

thanks again and happy new year you have helped a lot

@candipill 3 жыл бұрын

I think your tutorials are of the clearest and most demystifying of all the tutorials I have watched on this. I hope you wouldnt mind me asking you for some advice. I bought some flexible silicone moulds that I want to cast POP in for thin clay decorative embellishments. I want to know if you have ever Cold glue/white glue with your mixture to make it more sturdy? There are other tutorials that recommend 2 parts POP, 1 part water and half part glue? Would you recommend this? I tried to do it with crack filler but the casting came out too crumbly and my castings all fella part when I tried to unmould them. I think the glue would make it flex a little more so that I can gelt it our of the mould but I am wondering if I should make the ratio 2 parts POP, 1/2 part water and 1/2 part cold glue?

@satyensharma960 3 жыл бұрын

Thanks for the appreciation. I work on polymath and keep exploring different materials. You may check my link and recent artworks. instagram.com/sharmasatyen Further to your query you can use white glue positively as it prevents in cracking and more durable when POP dries. For mixing I suggest go with 3/4 water and 1/2 white glue mixed first. It will bring consistency in the solution and then later mix with POP. Other wise you may end up in half mix and half lumps. Hope it helps..:)

@candipill 3 жыл бұрын

@@satyensharma960 thank you very much!

@hellenkamau3755 2 жыл бұрын

Thanks for the question Candipill Tincan. I was about to ask the same. I need to make some cases for selling, so I need them sturdy enough to be worth buying. Thanks for the answer Satyen. You have captured it well. Just like I needed it. Would the same work for white cement? What would the right ratios be like? Thanks again. This is very helpful. God bless you.

@adithyana3163 Жыл бұрын

Thank you for the video this video is a lot for mee

@aimanabbas981 Жыл бұрын

Very helpful. But ky glue and plaster mixture always cracks how to fix it.

@arpitascreativity 6 жыл бұрын

Thanks for sharing such a nice information

@alexr6527 2 ай бұрын

your welcome

@creativemonali4026 3 жыл бұрын

Thanks for sharing 👌

@roopalisakhlecha 2 ай бұрын

Hi, shouldn't we add white glue to this mixture? For the plaster to get fixed on the surface

@johnjohn-ne8fw 4 жыл бұрын

I can't lie. I do see a difference. Thanks

@misatoshi07mohammed20 4 жыл бұрын

Awesome video brother

@ViZiOMusic 7 жыл бұрын

Good Work!

@joechiodi5529 Жыл бұрын

Can you use this for the clone a Willy thing?

@karimullashashaik8684 4 жыл бұрын

Very Good info 👍

@deanmroberts4335 5 жыл бұрын

Thank you

@renedupre7971 2 жыл бұрын

Thank you!

@monikakumari4573 2 жыл бұрын

God bless you

@123thebasics 4 жыл бұрын

Thanks so much 👏👏 l like pouring the water in first method.. I'm so happy I came across your viedo. I'll be working with plaster of Paris on Halloween projects this year..the plastdr has been sitting in my garage fot 2yrs waiting on a project. Thanks again 😛

@jamesthe27th94 2 жыл бұрын

Can a plaster of Paris pot be dry in only 10 hours in hot climate?

@kalasshalabyartikohli9168 3 жыл бұрын

Informative

@proudindian5020 2 жыл бұрын

Thanx for the tip

@karimullashashaik8684 4 жыл бұрын

Good video 👌

@attitudechand5579 2 жыл бұрын

Thanks ❤️

@sahajjeewanbydrlata 3 жыл бұрын

Nice to see new friend 🙏

@anchornaturals Жыл бұрын

Wowww what a wonderful tutorial 🙌👍Thank you so much 🙏🏻🙏🏻

@mixideasandcreations2726 6 жыл бұрын

That is information video... Thanx

@ravikantkumartoni7948 4 жыл бұрын

Good video

@rainbowofkids 2 жыл бұрын

How can you make this image tried this both ways

@craiglaunder1494 6 ай бұрын

We’re having trouble with our plaster of Paris going mouldy after letting it dry why is this happening please

@allainereyes8927 3 жыл бұрын

Can I use the baby powder bottle?

@nidhulek Жыл бұрын

my mixture dries up quickly.. any reason why this is happening ? I did make the mistake of stirring it too soon :(

@janethutcheson3678 2 жыл бұрын

I do like option 1.

@Mary-Ann_B_Mabaet 3 күн бұрын

Thanks! I was wondering why the plaster looked so watery! How in the world am I supposed to use it in this state?! Lol

@patriciaweaver7735 5 жыл бұрын

hello thanks for the help what I meant to say was my POP got stiff while mixing using both methods it did not stay liquid and lovely like yours did after 2 minutes it was too stiff to pour that is why I asked did my POP go bad. and I used cold water for both methods thanks again

@satyensharma960 5 жыл бұрын

Yes ! shelf life of POP is 3 - 6 months..that might be the case I think.

@bkumar3670 2 жыл бұрын

@@satyensharma960 first of all thank you for this simple informative vdo.... cleared my doubts on where i was going wrong after wasting 5kgs of POP lol. Always, now i know what to look out for when buying POP. This little date of expiry info wasn't mentioned where ever i searched. Glad i came across your page. You have one more subscriber now!

@satyensharma960 2 жыл бұрын

@@bkumar3670 glad it helped.. follow for my artworks at instagram.com/sharmasatyen

@vivinnair5634 2 жыл бұрын

Where will I get pop??

@dwarikasuman740 4 жыл бұрын

If i am mixing 1 kg Pop then how much water should I use

@chromoplate8713 2 жыл бұрын

Nice

@poojakprasad7156 4 жыл бұрын

Wow!! Can definitely see the difference... Can I pour this mixture into a cone and use as lining for a drawing??

@satyensharma960 4 жыл бұрын

You asking for relief art ! ..you can but I suggest to go for marble powder that is more durable..hope it helps.

@olufadekemiajani4226 5 жыл бұрын

Thanks for the video. Can one use pop to make beads?

@satyensharma960 5 жыл бұрын

Yes, when you see it becomes semi-solid clay type but you have to be a bit fast before it completely dries out. Also, do layer the beads with color or something, else they will abrade. Hope it helps :)... Do check my other videos how to use this paste to create beautiful display chocolate bottles.

@SonuKumar-zk6bd 6 жыл бұрын

nice

@artofeverything6735 4 жыл бұрын

Can i use calcium sulphate

@christophertadeo6120 Жыл бұрын

1200 degrees heat absorption.. well that decides it... 😳👍

@SarveshSingh-zk4lu 5 жыл бұрын

Achi janakari batai

@iamshidvlog1112 4 жыл бұрын

Its hard for me to do plaster of paris bcos if i mix it, in 1minutes it bcome hard already if add water to it, it will not hard anymore

@simonapopescu8712 4 жыл бұрын

Thank you, very useful information. If I want to make a flower impression picture and add cement for strength, what is the ratio between POP cement and water? Thank you.

@satyensharma960 4 жыл бұрын

Honestly I haven't done that before..but I wonder why would you need to add cement..for strength you can add reinforcement say iron bars or chicken mesh but that is subjective what you are crafting and size or shape.

@humairagul7720 Жыл бұрын

I try to use plaster of pairas.. but it becomes like a stone after 10 to 15 seconds... i am not able to use it.. it dries quickly.. even in 10 seconds

@sakirhossain2032 3 жыл бұрын

Agar hath ma lage toh koi problem hai kia??

@vanigarstreetoldcsc764 3 жыл бұрын

How to mix pop in clay form please make video on these

@pusaersd5317 3 жыл бұрын

Please let me know what is the best option to make diy pots? Pink or yellow one? Thanks!

@satyensharma960 3 жыл бұрын

Yellow one for consistency.

@pusaersd5317 3 жыл бұрын

Thank you. Very helpful

@mnzmughal7274 Күн бұрын

Koi es ka model bana Kay day saktay haa ..tell me

@bhaawinbhaawin1018 11 ай бұрын

Hi…plaster of paris jual kat mana ye?

@Amlish1 4 жыл бұрын

Can this mixture be used to repair cracks on my cemented roof?

@satyensharma960 4 жыл бұрын

I'm afraid not.

@reactiveinsight. 4 жыл бұрын

but i want to make a big structure out of it so how to give the POP more strength and make more stable

@satyensharma960 4 жыл бұрын

From big structure I assume you talking about Sculpture something..well you need to add reinforcement inside and wrap with some chicken mesh..that will hold the paste to your desired form and shape.

@reactiveinsight. 4 жыл бұрын

@@satyensharma960 thanks satyen

@michaelanderson5232 3 жыл бұрын

Chicken wire

@michaelanderson5232 3 жыл бұрын

Or use paper mache (on chicken wire)

@janakiyeluripati6368 5 жыл бұрын

Very nice video. By the way which one to use if I want to make molds. Also, can I make molds using kids toys like peppa pig. What should I do to get peppa pig mold. Please help I want to make it for my daughter and then let her paint it. Please help

@satyensharma960 5 жыл бұрын

Glad you liked it .. I suggest to go with option 2 as it is dense and viscous. Less chances for air to trap. For molds check online easy to use for all purposes. Sharing a link here, hope it helps: www.amazon.in/JoyGlobal-Silicone-Chocolate-Sugarcraft-Decorating/dp/B07FP14FBL?tag=googinhydr18418-21&gclid=CjwKCAiAodTfBRBEEiwAa1haupGydjYN4xe3-ajRMMmFkGo-CmieeJYurHyAecXbJLS3s59iNgL5IhoC6soQAvD_BwE

@slayer0960 4 жыл бұрын

Hi i just bought some pop but as i am mixing it it is going lumpy and setting very quickly so i have barely 2 minutes from adding the pop with water before its setting in my bowl before i can pour it please help

@satyensharma960 4 жыл бұрын

Add cold water and use a table spoon of white vinegar to delay curing time..it also depends on the POP quality if it is old or maybe water is hard or soft by mineral content..use distilled water and clean container to mix.

@lavanyanair7147 6 жыл бұрын

Thanks....after watching ur video the mix turned toooooo good

@satyensharma960 6 жыл бұрын

Lavanya Nair I'm glad you liked it. Chk my FB page to see more creative stuff. facebook.com/CreativeAnts2016/

@ThaMaskRapper 3 жыл бұрын

But why is it like milk it's supposed to be dry

@solimarrios 6 жыл бұрын

How can I use this as a weight for my center pieces? How long till it dries in a small bucket?

@satyensharma960 6 жыл бұрын

Cast them in the balanced molds, round and flat base for stability, let it sun dry for 20-30 minutes.

@patriciaweaver7735 5 жыл бұрын

Hello my POP set up so fast using the water first and water last version I used both and is i did not ever get to use it could my pop have gone bad please help

@satyensharma960 5 жыл бұрын

Hi..it depends on the climate how dry or humid air is..use cold water .. POP is a game of max twenty fifteen minutes..by then it's start drying and taking shape..else try using different composition material available in market ranging 5 - 30 min drying period .. Hope it helps.

@x3apex208 3 жыл бұрын

What is plaster

@pratimapatil7558 4 жыл бұрын

I made a planter by covering plastic container with pop just now and kept for drying after 1hour there are cracks on it please help what to do?

@satyensharma960 4 жыл бұрын

Use white cement for a planter purpose that's more durable. In this case it might be thickness issue which lead to uneven drying. The inner layer dries slow as compared to the outer one which is exposed to the air that dries quickly. If it's completely dry fill the cracks with dry wall compound and latex paint. For other projects to avoid cracks cover it to retain the moisture with a damp cloth let it dry slowly. Also use fevicol in the mixture. Hope it helps.

@pratimapatil7558 4 жыл бұрын

@@satyensharma960 thank you so much replying. For now I made thin paste of pop and applied on the cracks with paintbrush they are disappeared for now...let's see what happens after complete drying....next time will surely add fevicol to it..

@ammarabatool3253 4 жыл бұрын

I wana ask what is drywall or drywall material . Is it plaster of pairs or something else. Cz i hv seen drywall art on youtube.

@satyensharma960 4 жыл бұрын

It's dry wall compound for drywall art.

@nan2790 2 жыл бұрын

Water powder ratio, this we have learned in our dentistry degree

@abhilashamishra1229 6 жыл бұрын

Very nice vedio thanks for help my pop developed lumps but not after i saw this vedio thanks again😁😁

@arpitakumari9322 6 жыл бұрын

@satyensharma960 5 жыл бұрын

I'm Glad.. it worked for you:)

@stephaniephilbrick1811 8 ай бұрын

Does anyone know what the temperature of the water should be?

@Anonymous-hx5vw 3 ай бұрын

Normal tap water is fine. Cold or normal cold

@creativepotpourri5828 3 жыл бұрын

Excellent #creativepotpourri

@Gopimenon123 2 жыл бұрын

Sir, Can bowls made of pp be painted with something to make it look like ceramic

@satyensharma960 2 жыл бұрын

In appearance to some extent Yes, just coat the final paint coating with varnish.

@Gopimenon123 2 жыл бұрын

@@satyensharma960 thanks a lot

@flerpbird1955 Жыл бұрын

@@satyensharma960 how well does the plaster retain detail while casting for creating molds?

@SevenDaysToNoon 3 жыл бұрын

Good job swapping the bowls at the end for clarity! 😂😂😂

@mina7572 2 жыл бұрын

Color coded.

@user-rh5mn7fp8s 2 жыл бұрын

How can we make plaster of peris more stronger any idea

@satyensharma960 2 жыл бұрын

Add fevicol to the mix

@usmanali81 5 жыл бұрын

thanks

@deeznuts_808 3 жыл бұрын

How did yours still stay wet after 5 minutes? I made mine and it was hardening before 5 minutes..

@shropshirehistory908 3 жыл бұрын

Dee Kahakua at 4:57 look how many cups there is behind the yellow bowl! There should only be 6 but there’s 7! so I’d say he’s added more water...

@satyensharma960 3 жыл бұрын

I've taken in 2:1 ratio to make the mix nothing extra..don't mix like a beaten coffee be gentle let the course take its time..:)

@satyensharma960 3 жыл бұрын

@@shropshirehistory908 I must say that was a great attention to detail..but the extra cup in background might be used to make equal proportions in four cups..since its a long back video can't recall exactly..but the mix was definitely 2:1. Thanks for the feedback.