How to make a PLASTER PRESS MOLD and How to use it

Рет қаралды 205,303

2 жыл бұрын

Hi everyone! in this video I show you how to make a plaster press mold. It's very easy and the resulting pieces are quite neat and professional, it's really worth it.
MATERIALS I USED:
-Plastic container
-Cooking oil
-Pottery plaster "Betalfa" (In case you can't get the one indicated you can use a common one, but the mold won't be as resistant)
-Water
-Clay (I used a low temperature clay formulated for modeling and throwing)
-Wood rolling pin
-Rods
-Rib
-Brush
-Sponge
-Spoon
________
Chillpeach - Smell Of Lavender : • [no copyright music] '...
Chillpeach - Feeling Cozy: • [no copyright music] '...
Cheel | Track: Blue Dream

Пікірлер: 112

@omiadi7485 2 жыл бұрын

This is a really good tutorial. I'm very new to crafting and air dry clay. I just learned so much from this video. Thank yo so very much.

@appleoneill5135 Жыл бұрын

This was so informative, thank you loads for sharing

@renalynartmagosara 2 жыл бұрын

Thanks for sharing your beautiful tutorial how to made it, fascinating to watched.

@ULBEAUTY Жыл бұрын

I love watching you make things!

@UmiCeramics Жыл бұрын

😃

@ULBEAUTY Жыл бұрын

@@UmiCeramics I’d like to talk to you as I want to see if it is possible to be in touch? I want to talk with you about some things, but I cannot see your instagram or email or something?

@honig571 2 жыл бұрын

Your videos are so good and instructive. Thanks ✨

@UmiCeramics 2 жыл бұрын

Thank you! ♥

@Jenny-yl2hw Жыл бұрын

Wonderful tutorial, thank you for sharing..

@edwoodcon9039 Жыл бұрын

Thanks for sharing your knowledge. A good video. Thanks again

@marekzaleski7407 3 ай бұрын

Try adding gypsum to the water while stirring, there will be fewer lumps :)

@cintiafranco6967 2 жыл бұрын

Hola Soy de Argentina y encontré tu canal Estoy empezando con este arte y ver tus videos me ayudan mucho! Gracias

@UmiCeramics 2 жыл бұрын

Hola! Que bueno saber que son de ayuda!

@tuncayorucartteacher4407 2 жыл бұрын

Your work is great Congratulations

@evangeliemourouti 2 жыл бұрын

Thank you so much for your help ,I can make it easier now.

@mrb9333 2 жыл бұрын

How beautiful 👍👍

@HadaroFFMouldStones 2 жыл бұрын

Well done 👍✅

@mariavanesavillanueva1018 2 жыл бұрын

Muchas gracias por tu video, usé la proporción de agua y yeso que nos enseñaste y me salieron perfectos los moldes🤗🤗🤗

@UmiCeramics 2 жыл бұрын

Buenísimo!! 😀✊✊✊

@wawa0cc9915 2 жыл бұрын

Inspiring!

@abdooogamer4192 2 жыл бұрын

Fun and relaxing to sleep and relax 🥰🧘

@UmiCeramics 2 жыл бұрын

😄

@helenangus1675 2 жыл бұрын

Thank you so much for sharing. How would you make an inverted mould?

@lilipeachy 2 жыл бұрын

I'm learning a lot with your videos, thank you so much !

@UmiCeramics 2 жыл бұрын

So happy to read this!

@ladyturpi9636 Жыл бұрын

Me encantó.

@chandnijanardhan7017 7 ай бұрын

Very good video, thank you 🎉

@CallMeTitoO 2 жыл бұрын

I hope for more videos to learn more from u, btw, I loved the color of ur nail polish 😄

@UmiCeramics 2 жыл бұрын

Haha thank you!

@CallMeTitoO 2 жыл бұрын

@@UmiCeramics I followed u on Insta🌷

@alenagigoux617 2 жыл бұрын

Graciassss!!!!⚘

@jarillay1479 2 жыл бұрын

Muchas gracias😁😁

@Zoomfreaky 2 жыл бұрын

Thank you! Loved this calm and beautiful video. Lovely instruction. Nice and neat bowl too. May I ask how you clean the plaster of your plastic mold and your spoon?

@UmiCeramics 2 жыл бұрын

Thank you ♥! Good question! I always clean my tools and plastic containers before the plaster dries, using water and washing detergent. You can also wait for it to dry completely to remove it, but in this way plastic containers and tools tend to get scratched and damaged

@infochan8241 2 жыл бұрын

omg i loved the video, im just starting and i want to ask where do you get those tools??

@Asmafarag0000 2 жыл бұрын

So nice ...❤

@UmiCeramics 2 жыл бұрын

Thank you!

@freespirithippie6857 Жыл бұрын

Does it have to go in a kiln next? Love your channel.

@begato28 2 жыл бұрын

Muy buen video, gracias por compartir tu enseñanza. Usas yeso común, o yeso cerámico para moldes? Gracias de antemano.

@UmiCeramics 2 жыл бұрын

Hola! gracias! ♥ Usé yeso cerámico pero para este tipo de molde y tamaño chico se puede usar yeso común y no va a haber una diferencia notable

@smashe2739 2 жыл бұрын

جميله ابداع 😍👍

@UmiCeramics 2 жыл бұрын

Thank you!

@mge12 Жыл бұрын

Wow..

@Odette_112 2 жыл бұрын

Thank you so much! I’ve always felt a bit intimidated to make my own molds, but you made it look so easy. So excited to try! 💐🤍

@UmiCeramics 2 жыл бұрын

Hi! I'm so glad to read that this tutorial has encouraged you to give it a try! ♥!

@vigatroiano8653 3 ай бұрын

Hello Umi, I love your videos! Your work with clay is truly inspiring. I’ve noticed the cloth you use on your table when rolling out clay and I’m curious about it. Could you share what type of cloth it is? It seems really useful for clay work. Thank you for sharing your amazing videos! 😊🙏🏼

@UmiCeramics 3 ай бұрын

Ooh thank you so much! ❤️❤️ I use a very thin canvas, it has almost no texture. I've used this type of fabric for years and I like it because it doesn't leave visible marks on the clay and it's easy to wash and clean

@vigatroiano8653 3 ай бұрын

@@UmiCeramics Wonderful! Thank you so much for your answer I really do appreciate it! 🙂🙂

@a_asimr 2 жыл бұрын

شكرا لك على المحتوى الجميل، اتمنى لو انك تترجمين للعربيه دوما❤️❤️

@melaninobsession5706 2 жыл бұрын

If you don't mind me asking, where do you purchase your products from?

@paulafalgas181 Ай бұрын

I loved it what did you spray on table towards end of video and what were you doing when you were sliding bowl over table that you just sprayed? Thanks, Paula

@UmiCeramics Ай бұрын

Hello! It's water and it's a quick way to level out the uneven edges of the plate

@cherriecherrie4432 2 жыл бұрын

Would you like to make some ceramics with the cracked surface glace, pls.

@jennifergodinez995 8 ай бұрын

Can we use these to make candles?

@crunchybeen4263 Ай бұрын

Is there a good way to determine how much plaster you need to mix up?

@navarro4524 Жыл бұрын

Is the plaster good for casting?

@jeffeico Жыл бұрын

Olá sou brasileiro e gostaria de saber quanto tempo leva a cura da peça e como faz a cura da mesma?

@aishaalbashiri491 2 жыл бұрын

How long does clay last in the kiln?

@chandnijanardhan7017 7 ай бұрын

How long do you need to wait, before taking it off the mould?

@antalyapsychotherapy Жыл бұрын

İf i firmly press with a big spoon on the mold, would i get the shape of oval base of the spoon?

@olukoyachristianah4517 2 жыл бұрын

Pls how the you mix the mold like what and what to get as beginner ...pls can you do tutorial on that

@user-so6sf7wr2b 6 ай бұрын

What's that u are using

@dolly_faith1709 Жыл бұрын

What did you spray it with

@user-ez6ir1rq7k 2 ай бұрын

Please tell how to make a box😊😊

@designermgb4310 Жыл бұрын

What is the difference between plaster and gypsum are they the same

@arpitarpanchali 2 жыл бұрын

Nice tutorial 👍👍👍

@TasArtsbysakshi 8 ай бұрын

Hieee can u pls tell which is most best for dis art concrete, pop , ceramic powder???

@seemsfishy23 3 ай бұрын

Plaster

@jeonjkluv8082 2 жыл бұрын

hola!! quisiera saber como se secan, si al aire libre o utilizas el horno :)

@UmiCeramics 2 жыл бұрын

Hola! Este tipo de arcilla que estoy usando se seca al aire libre y luego necesita ser horneada

@NurDianaOfficial Жыл бұрын

I was wondering do you sure kiln?

@artesanatocomrosangelavasconce 8 ай бұрын

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@islamicdecorations1935 Жыл бұрын

رائع ممتاز

@merlinkater7756 2 жыл бұрын

Rubbing the rim on a wet surface is a smart one going to remember that

@xiaohanma2584 Жыл бұрын

what are you using to cover your table with? is it a canvas?

@UmiCeramics Жыл бұрын

Hi, yes, it is canvas

@xiaohanma2584 Жыл бұрын

@@UmiCeramics icic. Thanks for the reply!! 🤍

@worldofnoga7869 5 ай бұрын

Is this gypsum or cement?

@amechealle5918 2 жыл бұрын

I know you are using regular clay, but would this technique also work for air dry clay?

@UmiCeramics 2 жыл бұрын

Hi! I think it would work in the same way, but I'm not completely sure, it would be prudent to test previously if the air dry clay does not stick to the plaster

@MabruBlack 2 жыл бұрын

It would work but you have to seal the plaster with resin or something similar. Plaster is porous, so the air dry clay will stick unless is sealed. Once sealed, you should use some mold release agent and you’ll be good to go.

@posezenyoga5244 Жыл бұрын

what surface do you use to roll out clay? Is that muslin?

@UmiCeramics Жыл бұрын

Hi, it is canvas

@christylee5545 2 жыл бұрын

Your idea is so brilliant.....🧁

@khushimishra9658 2 жыл бұрын

Do you buy your white clay online? Please provide the link

@UmiCeramics 2 жыл бұрын

Hi, sometimes I buy it, sometimes I make it myself. The one I'm using in this video is manufacturated by a company from Argentina: "Arcillas Del Sur"

@ruchidhish4454 2 жыл бұрын

Hii... Doesn't this needs firing to make it tough?? And if not then which clay are you using so that it doesn't need to fire? 🤔

@wiki3139 2 жыл бұрын

Pretty sure she used normal clay, not the air dry one so she is going to fire it later

@BianchiEly Жыл бұрын

L’Argilla si asciuga all’aria? O serve un forno apposito?

@Sophie_519 2 жыл бұрын

Just curious… Why can’t you have used to original bowl to form the clay? Was the plaster necessary?

@UmiCeramics 2 жыл бұрын

Hi, to be able to use the original bowl you have to cover it with a cloth or plastic (so the clay does not stick to it) which leaves marks and deforms the final result. In addition, the plaster has the quality of absorbing water from the clay, making it possible for the piece to be hard in just a few minutes.

@Sophie_519 2 жыл бұрын

@@UmiCeramics Thankyou very much for your response. I understand now, I am new to pottery, in fact I just started a succulent garden, and they charge a bazillion for inch clay pots etc, so I only just started to explore making my own.. thanks for the informative video

@UmiCeramics 2 жыл бұрын

@@Sophie_519 A succulent garden? how beautiful! I am sure your pots will not only be beautiful but also special because they will be made by your own hands, and that's priceless ♥

@robsonwaynne7811 Жыл бұрын

👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷🌷🌹💐

@miriamlopez4490 Жыл бұрын

Come back please

@user-so6sf7wr2b 6 ай бұрын

😮is that cement o what please help

@user-is4ev3cr5b 2 жыл бұрын

مرحبا ماهي سماكة الطين

@mikeh6172 2 жыл бұрын

Great video, but this is a drape/hump mold not a press mold.

@hortensiableu377 2 жыл бұрын

Bonjour. Ne versez jamais d'eau dans le plâtre!!! C'est vrai, au contraire. Ce Plâtre est mis dans l'eau. ☝

@stephencraig7130 Жыл бұрын

Never add water to plaster always add Plaster to water.

@someonedumb_ 3 ай бұрын

hey actually thanks for the info but could u please also tell why we shouldn't add water to the plaster ?

@Hydrantchan 4 күн бұрын

@@someonedumb_probably for the same reason you add dry to wet when baking: it prevents lumps of dry spots in your final mixture.

@someonedumb_ 4 күн бұрын

@@Hydrantchan ahh thanks a lot for helping! :D

@soulstyl 10 ай бұрын

grams and dimensions;

@TruthIsNot4Sale Жыл бұрын

Why wouldn’t you just roll out the clay and put over the plastic mold in the first place instead of making a clay mold of the same plastic mold to use?

@UmiCeramics Жыл бұрын

Hi, clay sticks to plastic surfaces, that's why molds are made of plaster, or maybe wood! In addition, the porosity of the plaster absorbs the humidity of the clay and the piece dries in a matter of minutes