TLDR: gas management = charging handle for gas, bolt carrier group, h2 buffer

Great informational video for us dudes just now getting into the suppressor game.

Best explanation i've heard to date

Great video, thank you for the great info

Adjustable gas blocks are not the best idea because they add a new point of failure to the gun, but there is a pretty nice one (albeit expensive) called "RIFLESPEED Gas Controls". Best advice is to get a spring from Geissele or Springco and test with buffers from H2 to H4 until your ejection pattern is around 4 o'clock. You can also look up DIY gas buster charging handle if you want to save some money there.

love your video. Thank you! learned a lot.

This is like a Pandora’s box when you can one. Great video thanks for sharing the knowledge.

Thanks man, very helpful information

thanks for the advice!

This was a super helpful video for me

Good job!

Great video thanks

Your rifle on the wall looks like it’s been infected with the cordyceps

I have found that nothing really helps besides a superlative arms adjustable gas block. That actually tunes and adjusts the gas used to cycle the gun then it vents off excess gas away from the shooter. Absolute best thing i have done. Totally changed how my gun shoots smoothing it out and lowering recoil.

Good stuff, thanks for sharing, not much on this out there!

This is amazing, thank you. What do you mean if you need a can, give me a call? You sell cans?

If you haven't already got a radian sd, it's not much different than the basic radian charging handles

Great video I did not know about a BCG suppressed or unsuppressed feature. Where do your cases eject out to, between 3 and 4 o'clock? You AR-15 is suppressed only using an H2 buffer, with a barrel under 16 inches with a standard gas block. I would think the cases would be at 2 o'clock. I would think that rifle would need a H3 or H4 buffer weight to get the cases ejected between 3 and 4 o'clock so it is not over gassed. Over gassing over time breaks extractors and bolt heads. Usually a 16 inch AR-15 works great with a H1 or H2 buffer weight with no suppressor. Each build is different.

Do I need to change out for a heavier buffer spring?

Is it *required* to change out the BCG and CH to use ones that are more compatible with shooting suppressed? Or is that just recommended?

will these steps help keep the gun cleaner as well? i just suppressed my CMMG Resolute 6mm arc and I pretty much have to clean the gun every 20 shots.

5:08 to skip the rookie function explanation

what parts wear faster when shooting suppressed? gas rings? extractor? and have you tried the a5 buffer system? i have them on all of my rifles but my silencer is still in aft jail. its been almost 9 months :/

Bcm gunfighter

Not bad advice.. The bolt carrier you are using decreases gas to the internal piston which also decreases the gas expelling through the firing pin bore in the carrier..An adj gas block is even more effective as it decreases the gas going to the carrier in the first place..You also got right what the heavier buffers does (effects carrier velocity) not dwell time.. One side note, the use of a suppressor will decrease the rifle's life by 1/2..

Don’t shoot into the wind

i bought the velos to solve some of the gas in face

Actually it is a suppressor not silencer, because you are suppressing some sound and flash.

The gas leaving is not what causes the gun to be loud- it’s super sonic projectile braking the sound barrier. Technical term is suppressor not silencer

Thank you for the advice. I don't like adjustable gas blocks from what I've seen. The BCG seems viable. I use heavier buffer (H3) and spring, as im running a binary trigger on a 10.5" barrel. YHM Resonator R2 up front. Killer flex w/ the machine gun brotha!🫡🤑💥💥💥

Why anyone would register and get a tax stamp is insane to me. You’re the first ones they come for. I hope you would fight but we all know you won’t.