How to NOT Pick the Wrong Kitchen Lights

Рет қаралды 12,487

Күн бұрын

Electric Pro Academy - Real skills to make real money.
Synopsis:
There’s a lot of numbers when it comes to selecting lights: Size, color temperature, brightness, color accuracy, incandescent equivalents, life cycles, and more! In this video we break down the most important labels and current trends that we hope illuminate the beautiful spaces that you call home.
Laced within the technical instruction are recommendations and points of professionalism employed daily by Jefferson Electric masters, journeymen, & apprentices.
If the instruction in this video is unclear or skew to what you are searching for, feel free to comment below for additional assistance.
Thank you for watching; we value your feedback and monitor this channel daily.
EPRO-2-Call:
You’ve got the tools and the willingness to solve your own electrical problem, but are held up by a couple ominous details. Rather than hiring out the whole project, get EPro’s own Joel Walsman via video or voice call here: electric-pro-academy.square.s...
Products We’d Recommend:
*EPRO endorses pro-level tools & materials, and receives a small commission for purchases through our links from Amazon & other affiliate programs. We’d be happy to recommend more cost-effective products for DIYers and low-frequency users if you engage with us in the comment section!
[] EPRO’s Amazon Storefront: smile.amazon.com/shop/electri...
[] Feit Electric 4" Retrofit LED (3000K): amzn.to/3FHPpp3
National Electrical Code (NEC) referenced in this video:
Free Access Here: link.nfpa.org/free-access/pub...
Outline:
0:00 - Introduction
0:47 - Light Size
1:19 - Color Temperature
2:11 - CRI
2:50 - Energy Star
3:04 - Wet Locations
3:16 - Dimmable
4:01 - Lumen Output
5:06 - “How Much Light Do I Need?”
6:01 - Recessed Can Installation
7:26 - Cost
Connect With Us:
Electric Pro Academy is a multimedia team dedicated to training and instructing DIYers and professional electricians for the growth and dignity of the craft nationwide.
/ electricproacademy
/ electricproacademy
odysee.com/@ElectricPro
Jefferson Electric installs and services residential, commercial, solar, and Tesla systems in Indianapolis, IN.
www.jeffersonelectricllc.com/
/ jeffersonelectric
/ jefferson-electric-llc
Got a question or ideas for a future video? Leave a comment below and submit your idea here: forms.clickup.com/f/23xa9-70/...

Пікірлер: 28

@padppad Жыл бұрын

Personally, I’m a 2700K guy for spaces that I want to be warm like the Living Room and Bedrooms. I reserve the 4000K for kitchens and bathrooms. For this reason, I like the brands that offer switch selectable color temperatures.

@Byron88 Жыл бұрын

We buy adjustable color temp wafers and retrofits they're really nice by Juno 2700-5000k in 5 steps one product can match anything

@jovetj Жыл бұрын

Those are really common in the UK, it seems, and they're a good value.

@vince6829 Жыл бұрын

Thank you for sharing your knowledge.

@davidwayneprins Жыл бұрын

I'm still using 2700 only because I am sentimental to the old incandescent bulbs. Did not realize the pricing for can lights. Just put ten in my unfinished basement (the kids use one room as a rec room). Originally, there were three bare bulb fixtures on one switch. I rewired to have two switches. So I probably saved myself $1000 doing DIY.

@cengeb Жыл бұрын

HERA....high quality LED stuff, i have had 15 years on HERA 3W HO surface mount units finally changing them out after around 130,000 hours, or 24/7 use in my kitchen cabinets. Mfg. rated at 50,000 hours...cost much more than the chinese stuff, but held up perfect, color and brightness. New versions are 1/3 of price from 15 years ago, and better drivers....HERA makes some great stuff...they use LED from the primo makers Lumiled, Osram etc

@bahbarino4479 Жыл бұрын

Always great video’s…highly recommend DMF 4000k for kitchen. DMF have high quality drivers. My remodel from 2016 not one of the 36 variants of DMF modules have failed in any way.

@jovetj Жыл бұрын

A guy I know hates Feit LED bulbs, refuses to use them.

@RCMServices Жыл бұрын

NIce white oak cabinets

@holtrussell Жыл бұрын

I learned about CRI the hard way. The “inexpensive” led spring actuated retro cans sold on Amazon are awful. Returned and purchased higher CRI from Home Depot and made a massive difference. Ironically, the incandescent bulb produces a CRI of 100. I don’t think any (or many) LED bulb on the market hits 100 CRI. Better buy the superior performing incandescent bulbs while still able!

@frankjones4550 Жыл бұрын

What happened to the video RV conversion with the NOT lithium batteries?

@zekenzy6486 Жыл бұрын

Great Video. Thank you for sharing. I have question , I want to learn more about electrical , Can I used 14 gauge wire and 12 gauge wire and 10 gauge wire for 240 Voltage ?

@jovetj Жыл бұрын

It's the amperage that determines how thick of wire is needed. The voltage doesn't matter, as long as the voltage is within spec. Home wiring is typically rated for 600V, so as long as you stay under that, you'll be fine. Secondary to amperage is the distance. A 450 foot run will likely need thicker wire to counteract the resistance and voltage drop that a 30 foot run just won't have. The Code provides guidance and direction on both of these things.

@dannyhutt Жыл бұрын

Great video, much appreciated. I bought a set of thin LED lights to go in the ceiling. But the lights just have thin bare wires and didn't come with junction boxes. Is there a small code compliant junction box I could buy or can I just use the good old Wago connectors without a junction box?? (the connections would be near the light inside the draft proof box above the light in the space above the ceiling).

@BenCos2018 10 ай бұрын

you need a box even if you use wagos they do make a box for them though look up wago box

@beachboardfan9544 Жыл бұрын

2:12 Why are electricians still using can based lighting when pancake lights exist? Is it just a matter of selling old stock before moving to modern tech or is there something else?

@bahbarino4479 Жыл бұрын

Codes !

@beachboardfan9544 Жыл бұрын

@@bahbarino4479 NEC codes?

@danielkofman4592 Жыл бұрын

No one put pancake boxes in new construction. Pancake boxes are for when you don't know where the joists are.

@beachboardfan9544 Жыл бұрын

@@danielkofman4592 I'm talking pancake lights, no boxes

@JMjayesim Жыл бұрын

@@beachboardfan9544 if you're talking about the wafer lights, those are for mostly for running in remodels where you don't have an existing junction box that was part of the home. Those lights allow you to put it anywhere in the ceiling so long there is drywall. This house in the video was built with those can boxes and wafers would be not the best option. There are some that can do both I imagine.

@Mike__B Жыл бұрын

1/10th the electricity with 25x the lifespan * (*when compared to incandescent bulbs that virtually no one uses anymore anyways). And when those LEDs go, they don't just go out, they can have a flickering period which tugs with your cheapskate genes of "it's not that bad flickers once every now and then" all the way to "screw it I'm getting migraines from it flickering!" and then my personal favorite replacing with something that even though it is the same color temp on the box it ends up looking different than all the other LEDs in the room and if you have the tiniest OCD in you you will need to replace every single one to be the same exact color and brightness.

@WApnj Жыл бұрын

Have to disagree with you about 3000k being the best choice. Way to 'white' and glare producing. 2700k is the best for eye comfort.

@alanparish7302 Жыл бұрын

I personally hate the amount of choices that are out there. I see a lot of wasted product do to the amount of brands that don’t look the same in its light spectrum and physical design. If they only offered white devices and 3500k color I would be beside myself.

@jovetj Жыл бұрын

I wish all cars were black, I'd be beside myself. I hate all those silly clown colors! /sarc