No video
HOW TO NZXT Kraken Z73 & Z63 on AMD AM4 & AM5/Threadripper Install Guide
Рет қаралды 807,984
Күн бұрын
@NZXTglobal 4 жыл бұрын
💜
@ArwinTours 4 жыл бұрын
Hi, can I get one to test? :D
@KeeperOfKale222 4 жыл бұрын
I'm gonna need one to test too, for all 4 of my subscribers And... I'm gonna need a PC to test it on.
@DeepTitanic 4 жыл бұрын
I've just installed one and it works although doesn't show up in Cam so the logo's stuck upside down. It isn't listed in the device manager.
@kilamah8099 4 жыл бұрын
NZXT why the fck the x73 don’t have the 3 to 1 fan adapter?? Now I am sitting here and can’t use it
@joeltmack 4 жыл бұрын
What’s with you and purple?
@petepete9435 4 жыл бұрын
Going to buy this cpu cooler for the sole purpose of having a "Gif" display. :)
@paradox8038 4 жыл бұрын
hopfully you are the 1 of 10 people able to get CAM software to recognize the kraken... no luck here :(
@ezzahhh 4 жыл бұрын
@@paradox8038 I am deciding between the Kraken Z63 and the Fractal S28 Design, I really want the Kraken but these kind of comments scare me, I think i'll go with the Fractal since there is no software needed. It's a shame since the Kraken is so damn cool I wish they had better software
@paradox8038 4 жыл бұрын
@@ezzahhh mine works now that i got the internal USB hub from NZXT took them almost 2 months to send it for free. If i would have known it took them so long i would have just purchased it off of amazon as it was available for next day delivery the entire two months i waited.
@ezzahhh 4 жыл бұрын
@@paradox8038 Damn that sucks man, glad to hear you got it working in the end though
@paradox8038 4 жыл бұрын
@@ezzahhh yeah i do love it even despite the long ass wait
@hmemcpy5807 4 жыл бұрын
4:01 "What a time to be alive! 2020 is looking very cool for all things [tech]" yeah, about that...
@tuckerwelty3913 4 жыл бұрын
2020 is terrible besides tech
@nataliewilson2114 4 жыл бұрын
I wonder if he has been on the news lately...
@frostxlegendzx5798 3 жыл бұрын
Igal Tabachnik yea about that 6000 - out of stock Rtx -sold out
@Naruto-iq1wm 3 жыл бұрын
@Jeff Mattel your dumb, he knows about coronavirus, and plus he said tech NOT Real Life
@Naruto-iq1wm 3 жыл бұрын
@@frostxlegendzx5798 the PNY GeForce RTX 3090 Is In Stock
@SarkarMotion 4 жыл бұрын
Finally the day has come, the GS logo is on a CPU cooler. The universe is at peace again.
@bekahsmith1317 4 жыл бұрын
ummm he's had it on another cooler for a while now....
@ChiTownPulse 3 жыл бұрын
Thank you very much for such a detailed run-through and for not skipping anything no matter how mundane. I really appreciate it. I built my first computer and it was like you were in the room with me.
@Pito2k6 4 жыл бұрын
Installed mine an hr ago using this guide and everything is running good thx
@ignacio7250 3 жыл бұрын
Hello, But, Manual says Connecting the pump tach to CPU FANS, NOT CPU OPT.. some difference?
@stormchaser12345 2 жыл бұрын
I know it's been two years but I just wanted to say thank you for uploading this. I just installed my Z63 without the instructions. You have a new subscriber!
@christenlanger 4 жыл бұрын
Oh, glad to know the included AMD bracket now doesn't go with clips. I have an x62 and installing this cooler to the default hooks were a pain.
@pete565 3 жыл бұрын
Subbed instantly. You're my favorite techbuild guy from now on. The patience you have to think of all the shots and the setup, the narration... is unprecedented. You ARE... a Jedi Master.
@iandvan8698 Жыл бұрын
How about this your super tech build can't even install this system properly and blowing hot air from CPU back into PC🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 dislike from me though 🤣🤣🤣🤣
@h3o296 4 жыл бұрын
Just ordered Z73 direct from NZXT since unavailable on Amazon. Thanks great video and you’re the only one I could find showing software details for the lcd. ...and subbed! 👍
@Phalaxis83 4 жыл бұрын
Best install guides on YT! Don't @ me. AIO screen looks real nice. Love that you can see some sys info at a glance. Keep up the awesome work fams 🙂
@jamescollins69 2 жыл бұрын
THANK YOU SO MUCH FOR THE UP-CLOSE AND INDIVIDUAL SHOTS OF THE SCREWS! Such a basic thing to do but we've been tryna figure this out for an hour soooooooo thank you so much!
@gregorymostella21 4 жыл бұрын
Hey Nick & Klaire, love the energy & tech know-how always evident in your videos. Keep up the great work!
@Brianuuuu 4 жыл бұрын
How to uninstall 250$ from your wallet
@KlaireGearSeekers 4 жыл бұрын
I can help with that. I'll send you the link to my Amazon wishlist 🤣🤣🤣
@93ksj 4 жыл бұрын
Klaire - Gear Seekers Klaire 😂
@arckanum332 4 жыл бұрын
Nugraha Triputra $250 is chump change
@Hawlkeye-e9p 4 жыл бұрын
Money better spent donating to trump.
@capito4585 4 жыл бұрын
Arckanum said anyone who has enough money to throw away
@algergv1348 3 жыл бұрын
Thank you so much for having the time to explain this so clear! My new NZXT x73 is installed and i cannot wait to see it working!
@vampiricslayerz2521 2 жыл бұрын
So how is it?
@shrek7428 4 жыл бұрын
Just bought mine and came today, and I gotta say worth every dollar... It's so stupid quiet even on performance mode I thought I got a faulty part and it wasn't working until I checked my temps and was seriously blown away
@CourteousOutlaw 4 жыл бұрын
Many thanks to you guys, I just finished building my PC and this tutorial has helped me greatly. Keep up the good work!
@GearSeekers 4 жыл бұрын
Glad it helped!
@HALCYONphoto 4 жыл бұрын
Great videos man! If we opted for different fans (corsair w/ commander pro) would leaving the cables coming out of the nzxt cooler empty cause any issues you think?
@GearSeekers 4 жыл бұрын
Nah it wouldn't make a difference at all. I'd just plug the corsair pwm connectors into the fan connectors from these to regulate the fan speed.
@HALCYONphoto 4 жыл бұрын
Gear Seekers thank you!
@cat5krazy443 3 жыл бұрын
im thinking about doing the same thing. what was different in installing the rgb fans?
@FahimAhmedMasood 3 жыл бұрын
Haven't seen a much detailed video on KZfaq for AIO installations than this one. Good work and keep it going
@benferrari5518 2 жыл бұрын
you literally explained this the best. Didn't skim over any steps and clarified everything
@mmz12 2 жыл бұрын
Clear, concise. Well spoken and wonderfully edited.
@MrGoodFella 4 жыл бұрын
This is truly a nice looking AIO and has tons of great features. The GIF option is what I think most people will want and buy it for. Id honestly go for this cooler if the price wasnt so high lol..Nick, your the fackin man, amazing video as always! 🔥🤘😃❤
@lastnamefirstname9695 4 жыл бұрын
Best....Tutorial....Ever!!!!! NZXT sucks at “How To’s”!!!! Great video, I subbed!!!
@jacck123 4 жыл бұрын
Cujo TheRedNose agree NZXT tutorials way too fast and too zoom in when plug in
@jameshumprey4446 4 жыл бұрын
Thank you for explaining the extra cable coming off the pump. Was confusing at first when i installed the NZXT Z63 AIO. Came across your video and it was helpful
@thief3544 4 жыл бұрын
most useful video about installing one of these i was loseing my shit about the plug thing that you said you can just let dangle. i thought it had to go somewhere
@irsyihalim 4 жыл бұрын
Hi, I'm very impressed with your review of the Kraken Z73. However, I have a question, have you tried running it with a different set of fans? I do wanna see if it does make a difference over the temperature
@ponga__4265 Жыл бұрын
Well it depends on what fans your using, if the fans are amazing, your temps will be amazing, if your fans are shit your temps will be shit
@gowhop Жыл бұрын
I just used this video to build my first pc! I just wanted to say thank you!
@GearSeekers Жыл бұрын
Glad I could help :)
@8VDSL8 3 жыл бұрын
Legend, couldn't find a video like this and desperately needed. Was killing me. Thanks!
@t_pagz 4 жыл бұрын
I just got the Z73 with an Auros Master board, how come some people and even the instructions say to use the CPU FAN header instead of CPU OPT. What’s the difference?
@ignacio7250 3 жыл бұрын
Exactly, where did you connect it? I am installing mine and the same question arose, because the manual says CPU FAN
@jaytsun8873 3 жыл бұрын
@@ignacio7250 i used the one that’s connected to the aio block
@jwaye89 4 жыл бұрын
Great installation guide. Loved the GS logo, keep up the good work
@fewmer1584 Жыл бұрын
Thank you for expalining the wires coming off the pump. i could not find info or figure out the 'spare' cable. Very detailed video, it was a great help!!!!
@aarynhale 3 жыл бұрын
After many, many, many, MANY hours of troubleshooting i watched this video and realized i can plug in the breakout cable a little bit deeper. Thanks nzxt for having clear and concise instructions 😒
@Sziklapeti 4 жыл бұрын
That gif is amazing. :D Really nice cooler.
@markdavenportjr5129 4 жыл бұрын
Nice totally gonna get one for my upcoming 3950x build. :)
@SangheiliSpecOp 4 жыл бұрын
Same ;) it would be better to show the cpu temps but.... I'm just going to play wacky gifs lol
@rapidburrito 4 жыл бұрын
I bet itd do pretty darn good on a 3950x! I opted for the icegiant thermosiphon preorder and basic air cooling for the moment (ik not optimal by any standard) while I wait on that order
@unknowngaming0000 3 жыл бұрын
Thank you your the only video that let me know about the cable u just leave hanging. I was panicking for a good 2 hrs cause I lost the manual and couldn’t check 😂
@dropshado 2 жыл бұрын
Thank you! You answered my question at 12:00 mins about the spare cable and I can resume my build! Lifesaver
@joozu 3 жыл бұрын
Nice build and great video! I just have one point, you've turned the radiator with the tubes up, instead of down. This will trap air between the tubes and radiator, which is not good for the longevity of the system, so I would recommend flipping the radiator to have the tubes pointing down.
@AlhazerdVivi 4 жыл бұрын
Thanks man, just bought a x63 and I was wondering where do I plug the extra 4 pin cable, now I'm just leaving it hanging at the back
@fengshui_ 2 жыл бұрын
This and your Lian Li AL120 video helped me so much! Liked both!
@IamWedge 3 жыл бұрын
12:05 Had to listen to it a couple times. "HUE CONTROLLER" Anyhow, I picked up my Z73 last week. Very nice.
@jasoncorganbrown 4 жыл бұрын
I don’t see any display rotation feature in the Cam app.
@Nik-oj7je 4 жыл бұрын
I dont even see the cooler coming up in cam software
@noizy8887 4 жыл бұрын
@@Nik-oj7je same did u find a solution?
@Nik-oj7je 4 жыл бұрын
@@noizy8887 nope, long story short i had to evacuate cuz of corona and took an 18 hour flight with my computer deconstructed in check in and just finished putting it back together, and i havent been able to check if it still works cuz i forgit my keyboard and the new one come son thursday. Pcpartpicker link is pcpartpicker.com/b/KkTCmG
@ashenone3427 4 жыл бұрын
I WISH I KNEW HOW TO INSTALL A KRAKEN X53 ON A X570 BOARD IN A H510.
@ashenone3427 4 жыл бұрын
update. Just installed it today.
@pvdaniel100 3 жыл бұрын
@@ashenone3427 do you happen to hve a video or something? I have asus x570 and a h510 elite.. i wanna know how to plug those cables and rgbs
@quaternionsphere 3 жыл бұрын
It took me an hour to realise I didn't plug in that second cable into the pump. Would take longer if it wasnt for your video. Thanks!
@pret0r 3 жыл бұрын
Thank you for this ! I just installed this on my PC :) It was my first ever PC installation :D thanks to you was easy and smooth :) Big thanks!!
@imicybro 4 жыл бұрын
How to wait 10 years before I can afford one.
@arckanum332 4 жыл бұрын
Get a job ? $250 is 2 days pay 💰
@kostaspaokgr8229 4 жыл бұрын
@@arckanum332 get me a job
@arckanum332 4 жыл бұрын
KostasPaokGR Alright buddy, if I could I would get you working 👍🏻 🤜🏻🤛🏻
@ParadoxalDream 4 жыл бұрын
To be fair, if you can't afford it you probably don't need it because that means you can't afford the CPU to go with it. You don't need such a cooler for most consumer CPUs.
@asiangypsy24 4 жыл бұрын
Never clicked on a video so fast 💃💃
@Gallyga 4 жыл бұрын
Really well explained, and nice to see it's going to be much easier than dealing with the massive style air cooler I normally go for.
@ppippipopo 4 жыл бұрын
I wouldn't have been able to assemble it without you. thank you so much
@obuyWw 4 жыл бұрын
4:07 Hell yeah!
@GitSumGaming 3 жыл бұрын
Thanks for not telling where to plug the fan splitter cable in....thumbs down
@GearSeekers 3 жыл бұрын
There is no fan splitter cable. It literally connects to the cables from the pump top. Exactly how I explained it. If you actually owned one you'd know that lol 🤣
@GitSumGaming 3 жыл бұрын
@@GearSeekers I was trying to find a guide for the X63 and the title and all bypassed my mind after looking at like 10 diff videos and online guides trying to find the answer and was irritated. Ill rescind my dislike, sorry I was tired and just wanted the answer already after 3 hours lol. On the off chance you know anything about the X63 tho...I just ended up plugging the pump into the CPU fan header and the fan splitter cable into the SYS fan header and plugged the two radiator fans and one front case fan into that....hopefully its right. Temps look good...again sorry...was frustrated
@GearSeekers 3 жыл бұрын
It is exactly the same for the X63
@GitSumGaming 3 жыл бұрын
@@GearSeekers It isnt though, you never plug in the fan splitter because on the Z73 and Z63 its connected to the pump. The X63 comes with a fan splitter that is completely separate from the unit. It has a 4 pin connection on it with 3 fan outputs. I just plugged it in the SYS FAN header. My old X61 the fan splitter was built into the unit (just as you show in the video) and plugging the 3 pin connection into the CPU FAN was all you had to do. Also, What about if you put the 2 fans on the other side of the radiator (manual shows either way) or top mount the radiator? But yea given that my fan splitter cable is completely separate from the unit and only has a 4 pin connector...Would it be better to plug the 4 pin fan splitter cable into the CPU FAN header and then plug the 3 pin connector on the pump into it along with the 2 fans OR keep the pump and fans separated and plug the 3 pin connector on the pump into the CPU FAN header by itself and then plug the fan splitter with the 2 fans into the SYS FAN header on the motherboard? I have also been noticing every so often a "buzzing/clicking" noise does this go away after awhile? I think its coming from the radiator fans. Currently it is installed the same as the old one. The radiator is mounted on the top of the case and the fans are below the radiator pulling air in (sticker side facing down). Temps are excellent 18-30c. Everything seems to be working on CAM. Its just that noise that I have heard twice now over the past 2 nights. It comes on and goes away after a few minutes.
@dorothy135 4 жыл бұрын
Thanks. It's always nice to see video of installations.
@williamcelecia8636 4 жыл бұрын
Gear Seekers: What a time to be alive! 2020 is looking very cool for all things tech! Me: Yesn't
@blacknightm 4 жыл бұрын
Nice vid 👍
@Wusyaname_ 3 жыл бұрын
When the cpu cooler costs about as much as the cpu
@Mart-E12 3 жыл бұрын
What a dumb name I was like what? The cooler is that old?
@Wusyaname_ 3 жыл бұрын
@@Mart-E12 What are you talking about?
@Mart-E12 3 жыл бұрын
@@Wusyaname_ your name saying "6 years ago" like if the comment was that old
@Mart-E12 3 жыл бұрын
Good troll
@Wusyaname_ 3 жыл бұрын
@@Mart-E12 How is that dumb? I’ve fooled dozens of people, and that’s only the people who’ve commented. Even got you for at least a few seconds based on your comment.
@katablade9439 3 жыл бұрын
I installed my Kraken z73 following the steps in the video, Very helpful thank you so much!
@JoelFabiani 2 жыл бұрын
Loved the dynamics! Kudos man.
@timmarks8941 4 жыл бұрын
Feedback: You don’t need to say “sata or sayta” every time lol. Everyone knows what you mean 😂😂😂
@GearSeekers 4 жыл бұрын
Yeah and if I don't people cry
@timmarks8941 4 жыл бұрын
Gear Seekers yeah but you’re Aussie! Wear it like a badge of pride! It’s sata not sayta anyway. ;) own it baby!!!
@GearSeekers 4 жыл бұрын
Don't tell me how to live lol
@OzHuski 4 жыл бұрын
I hope nobody buys this for Threadripper... That coldplate is woefully small and from personal experience, just isn't worth it.
@GearSeekers 4 жыл бұрын
It's the same cold plate size as every single asetek based cooler on the market. I ran an NZXT X72 on a daily driven 2970WX render machine with no thermal issues. Covering the dies is more important than covering the whole IHS.
@tzeffsmainchannel 3 жыл бұрын
As a total water-cooling NOOB...I was doubting...but now come to relize that AIO water-coolers have their own special water...and that they don't need maintenance! Wow, I made a good choice buying this unit! 8D
@priestofsyrinx6681 3 жыл бұрын
You just saved me a lot of hair from going gray xD. That one cable for RGB and such was bugging me. YOU ARE A GOD SEND
@adamb5142 3 жыл бұрын
Thanks for this video, totally lost my instructions and this helped a lot. Much love
@delta9k 4 жыл бұрын
At least they are still using the four point mount unlike Corsair is doing and now also to my dismay, Fractal's Celsius v2 coolers. Good thing is you can use that older Asetek mount on the newer coolers, and you can get them on Amazon - little spendy @ $16 USD - but I think worth it. I feel a lot better using that four point mount vs the plastic retainer and two clips...
@jsweatfn4745 3 жыл бұрын
OMG Thank U your the only KZfaqr that made it not complicated
@karaklcmehmetosmanpasa3680 3 жыл бұрын
Thanks for the video... I'll think about the Z73 when I'll build my next PC...
@imblondu 3 жыл бұрын
The video was a bit too long, but you were the only one who said something about that shit ass stupid loose cable. I ve spent 4 fucking hours trying to find a video + installing this cooler because i didn t know what to do with that cable. Thank you!
@db17k 4 жыл бұрын
man, your channel has the best music by far
@GearSeekers 4 жыл бұрын
That's because we make all the music ;)
@Shinnok789 2 жыл бұрын
Hello, very well done video, thank you for all the patient explanations. I looked at quite a few Kraken AIO's video reviews and installations lately and most are very rushed and not so detailed. Next week I'll be migrating my whole system into a new Phanteks P600S case (the grey version). And in the process I'll change the cooler on my Ryzen 3800X CPU with a Kraken Z63. My mobo is a Gigabyte Aorus x570 Master, which is somewhat similar to the Aorus x570 Pro Wi-Fi model you had in the video, so it helped a lot. And I'll also change the default cooler on my Aorus RTX 2080 Super with a Kraken G12 + Kraken X63 (God that's a lot of Krakens ... NZXT should make a contest "How many Krakens can fit in one case?"). This GPU cooler change is a first one for me, I've mounted a lot of rigs before, but never touched the cooler of a graphics card. And there's also the chip shortage that has the graphic cards prices risen sky high... so the process has to works flawlessly, otherwise i'll be stuck on an affordable cheap card for the next year or so, until the prices return to normal... so, no pressure :) Anyway, thank you for making this very useful video, it provided a lot of precious information! Cheers!
@ivvija 3 жыл бұрын
Thank your for this video, only "manual" I could find for the AM4 4x screw installation. Others are just the new clip retention
@FatButDisease 2 жыл бұрын
Video quality is superb!! My man still answering questions?! You’re a beast dawg. Watched the whole video and looked at the comments….attempted a quick google. Why did you plug the AIO power cable into the CPU_OPT and not the CPU_FAN or the AIO_PUMP? Motherboard manual says AIO, another video did the FAN and you did the OPT. I’m mad confused
@MegaMarioRed 3 жыл бұрын
Great video, My AIO is perfectly working but i really want that LCD screen so im really torned, but after watching this video, i'm now decided to buy it, damn my wants!! 😅😂
@oBroski 2 жыл бұрын
Do you ever have to put water into the aio cooling system?
@regicideclan 4 жыл бұрын
I am using a Ryzen 5 3600 in India, it hits it's limits(95 degrees) even if I play Watch Dogs 2 for an hour and goes into limp mode, I so badly want a NZXT X62 because that's the largest and best cooling solution that will fit in my case but I can't afford it :( Nonetheless, I feel amazing watching your videos on my P.C and right now I came down here to comment to tell you how moved I felt watching that montage with the gear seekers logo. Especially the music and to know that you create it yourself thrills me more, unfortunately I can't afford to pay and listen to it completely either, So I just kept replaying that shot! :') Big fan. Thank you for making my life that much more thrilling.
@Ss-tt9pp 3 жыл бұрын
Great video.. Very clearly explained.. Helped me a lot in building my first system
@102allenwalker 3 жыл бұрын
This video was so helpful I tried to like it twice lol 🤣🤣 and ended up ask why did I not like this !
@KinqWolf 3 жыл бұрын
Sana helal olsun bro iki işlemci içinde video eklemişsin tuttuğun altın olsun
@allaboutsk 2 жыл бұрын
Thank you for explaining in such depth.
@johnnydy7919 3 жыл бұрын
@geekseekers wrong fan setting in front of the case the air flow direction hot air will go in the case since the radiator is attached inside the case, hot air will flow inside the case
@GearSeekers 3 жыл бұрын
Incorrect
@evgrafrozenberg4648 2 жыл бұрын
Это тот самый человек, видео которого будет единственным полезным из всего того, что ты нашел по своему вопросу.
@sloakadani 3 жыл бұрын
Sorry if I missed it, but where to connect the fan-splitter cable at 11:21 on the mainboard? Do I use the CPU_FAN header for this? Because if I understood correctly, the 3-Pin "fan"-cable from the pump should be connected to the CPU_OPT header, right?!
@yasmingirl17 3 жыл бұрын
Got this cooler on Black Friday! 😎
@shinitaru 4 жыл бұрын
TYVM, I just installed mine by following this vid.
@ignacio7250 3 жыл бұрын
But, Manual says Connecting the pump tach to CPU FANS, NOT CPU OPT..
@MikeGoesBadaBoom 4 жыл бұрын
This helped so much! Thanks GS
@davejuniorsimracer 4 жыл бұрын
Gonna install this AIO cooler w/ Corsair LL120fans and use NZXT internal usb2.0 hub & iCue controller for corsair RBG hoping it works out. Thank for the Video!! amazing looking build.
@russells19 2 жыл бұрын
Amazing step by step. Thanks a ton man!
@ney9207 3 жыл бұрын
Man thank you for that amazing crisp clean tutorial. Quality is just beautiful. Sadly I ran to a little problem. I got the asus rog crosshair hero viii. I got 3 of these 4 pin headers, CPU-OPT, CPU-FAN and AIO-PUMP. I got the nzxt z63. Which one of these should I pick, does it make a difference? I would be really happy if u could help me out as fast as possible, I’m afraid that it doesn’t work properly. Thanks so far tho!
@brittneycooch6965 2 жыл бұрын
I am having the same issue!!! Please tell me how you fixed it 😩
@ney9207 2 жыл бұрын
@@brittneycooch6965 Connect the 3-pin connector on the breakout cable set to the 4-pin CPU_FAN or AIO_PUMP connector on the motherboard.
@ney9207 2 жыл бұрын
thats the connector for the pump tach
@brittneycooch6965 2 жыл бұрын
@@ney9207 I actually have a deal pump. New out of the box, so I’m having to contact NZXT about it. Thank you for replying back to me tho!
@bastar 4 жыл бұрын
What a great explanatory video. Thanks man! Sub!
@brodesb2319 3 жыл бұрын
Can u plug the pump power control cable into the cpu fan spot ???
@cavegmz9177 3 жыл бұрын
I love how it says Jedi Master at the bottom of your name LOLZ! great channel!
@paulypipes3082 4 жыл бұрын
Wow amazing. Your video is a life saver. I was gonna just use my stock cpu cooler that came with my amd. Definitely not! And you can't find one video on the internet installing the kraken on the front of the tower case. I have a nzxt 510 case as well. Can't wait to go home and finally install it
@dragosj 4 жыл бұрын
Note that for some mainboards is not working out of the box...they have some issues with USB power so you will need an extra nzxt internal usb hub that seems nzxt can send it for free...I had this issue with crosshair viii formula...
@djsatane Жыл бұрын
AM5 requires seperate bracket due to small height difference.
@GearSeekers Жыл бұрын
Actually it doesn't. The stack height is the same.
@djsatane Жыл бұрын
@@GearSeekers it’s not, this is from nzxt website I can link quote if you want
@SirchBehindTheBeat 2 жыл бұрын
Great video, well explained
@Bruno_Amaro 4 жыл бұрын
This one is very beautiful. Nice video 👌
@Mattsana 3 жыл бұрын
I notice that with the way you mounted it for the TR4 you won't be able to utilize all DIMMs as the USB and power connector to the pump will take up space over the most inner DIMM.
@paulcastro1545 3 жыл бұрын
For some reason, my z73 is showing up as Kraken X in my NZXTCAM. So it's not allowing me to choose the temp LCD screen. Any idea why this would be happening?
@ruddyalvarez4124 3 жыл бұрын
Same problem
@haroutkay7608 4 жыл бұрын
My motherboard doesn't have the CPU opt header but it does have the CPU fan header does that work?
@VFD-mq2vr 3 жыл бұрын
I definitely need the same thing answered mine has the cpu fan or cpu led
@okkrass 3 жыл бұрын
Great Video! Love the quality
@benitocamelo5633 4 жыл бұрын
Nzxt plus other tutorials ive seen recommend plugging in the pump in cpu fan rather than cpu opt. Which one is the correct way?
@GearSeekers 4 жыл бұрын
CPU opt
@benitocamelo5633 4 жыл бұрын
Gear Seekers hmm.. kinda confused. I installed my kraken yesterday night and everything was working fine. Booted up today, and cam wouldn’t detect the pump. Plus my system would reboot itself. Unplugged the pump from cpu opt to cpu fan, and everything seems to be working fine atm... 🤔. (Btw, thank you so much for the fast replies. I really really appreciate that!! ♥️)
@notmykitchen_ 3 жыл бұрын
The first bolts that you install to the mother board is terrible I’m having trouble getting them on
@sandeepaich1 4 жыл бұрын
which is the song at the beginning of the video. btw this tutorial has helped to know the installation details. Thanks
Sergio Outdoors
Рет қаралды 50 МЛН
Gamers Nexus
Рет қаралды 7 МЛН
The Provoked Prawn
Рет қаралды 89 М.
Mike's unboxing, reviews and how to
Рет қаралды 26 М.