How to open inside clogged toilet jet’s for weak slow double flush toilets! No plumber or chemicals!

Рет қаралды 44,551

Жыл бұрын

Highly recommend using the bottle brush because it bend easy & can clean out several jets at one time. Coat hanger is strong enough just to knock off the outside calcium under the lid. No chemicals needed and no plumber! See home and plant tips @momsmpm

Пікірлер: 47

@jrosalia Ай бұрын

CLR or Lime away also works really well at dissolving buildups. Just put in your tank and also into the refill tube in the tank.

@momsmpm Ай бұрын

Never in the tank because it eats the rubber flapper away but always in the overflow pipe! Thanks for the input!

@jtoo6060 11 ай бұрын

Thank for the bottle brush idea

@momsmpm 11 ай бұрын

Your welcome! You don’t want to know how many hours I spent watching Plumber videos and replacing everything until I figured out the Jets are clogged!

@ptbruiser2243 11 ай бұрын

TY, I had replaced everything in my toilet and still had A weak flush was going to just buy a new one this did the trick.

@spartacus3015 15 күн бұрын

Vinegar might help also

@momsmpm 15 күн бұрын

Yes it will

@paulbervid1610 Жыл бұрын

Great work

@momsmpm Жыл бұрын

Thank you!

@romanpaladino 11 ай бұрын

I had the same problem with a toilet from the 60's. I took an Allen wrench and dug into each and every jet. Some holes were almost completely closed off. The L shape made it easy to get at them. Chunks of mineral deposits began to break off. That did the trick.

@momsmpm 11 ай бұрын

That’s a great idea! Don’t you love how the old shit still keeps working fine, with minor problems if you know how to fix them! Ty

@Top5cring 2 ай бұрын

Its actually mold most of the time. it can get pretty nasty inside the water jet cavity.

@romanpaladino 2 ай бұрын

@@Top5cring What would be the best way to get rid of that mold? Pouring bleach in the tank?

@momsmpm 2 ай бұрын

Yes in the over flow pipe

@romanpaladino 2 ай бұрын

@@momsmpm Thanks, I'll try that. Though I'm certain that those hard chunks that came off were mineral deposits and not mold.

@clistowent8034 11 ай бұрын

That was better than all those plumbers videos!

@gobbletegook Ай бұрын

Yes, if you do not open those holes with something like a pipe cleaner, you will not get that angled jet that gives your poops that swirly action as it goes down!

@momsmpm Ай бұрын

I have another video where I use my dogs cable tie out which is plastic coated but it fits perfectly inside all those jets and just takes a couple minutes instead of using the brushes for each hole! It should be connected to this one see how you like that!

@sweetjrewing5435 11 ай бұрын

‼️‼️ Just pour vinegar down the overflow spout about 1 gallon ,let set for 2 hours.. problem solved.

@momsmpm 11 ай бұрын

I am going to try that! Ty

@YesuAiNimen 11 ай бұрын

or CLR

@momsmpm 11 ай бұрын

I know but I don’t wanna wait two hours!

@YesuAiNimen 11 ай бұрын

@@momsmpm 🤣🤣🤣🤣

@teem9010 11 ай бұрын

thank you! i spent forever yesterday cleaning the jets with a wire and razor and knife! the bottle brush fits in the jets? because that would be perfect to get the cleaner in there to soak!

@momsmpm 11 ай бұрын

Ty so much! You can dip that bottle brush and some CRL and if that doesn’t work I have another tip I’ll be posting another couple days so please like, subscribe & share! Any donations go to Annie’s go fund me page to pay her medical bills. I just uploaded another video I think she’s losing her vision or she’s looking for food I really can’t decide maybe you can help me out with that? Lol ty

@dannyjepson1987 11 ай бұрын

It's all about the money for many plumbing businesses.

@momsmpm 11 ай бұрын

You’re 100% correct and thank God I’m helping people not get ripped off! Ty Sharing your thoughts and liking our video!

@Randy-ul5hy 6 ай бұрын

I just use a metal coat hanger and bend it to fit. The main jet at the bottom of the bowl is usually the most gunked up and the main cause of the issue. Also shut off the supply valve, drain your tank, tape the rim jet holes shut...and then add some vinegar to the tank to let soak for a few hours prior to removing the scale.

@momsmpm 6 ай бұрын

I also use a coat hanger (in photo) but the bendable small brushes work better on the small jet’s. Ty for commenting.

@Randy-ul5hy 6 ай бұрын

Yup..for the small rim jets I use a small automobile pick tool. Looks almost like a dental pick but stronger. I have a set of 4 that have various angles . The 45 degree works the best.@@momsmpm

@momsmpm 6 ай бұрын

@@Randy-ul5hy I’d love to see those tools can you put a picture on here to show us?

@gobbletegook Ай бұрын

@@momsmpm DON'T USE METAL! You will chip and/or break off the ceramic or porcelain....or scratch other parts of the bowl!

@gobbletegook Ай бұрын

@@momsmpm DON'T USE METAL! You will chip and/or break off the ceramic or porcelain....or scratch other parts of the bowl!

@user-pb2vo4pt3t 9 ай бұрын

Use white vinegar! It dissolves the hard water buildup.

@momsmpm 9 ай бұрын

It takes too long to open when they’re completely clogged! Us women can’t wait, we like things done fast! Lol

@momsmpm 8 ай бұрын

I will do that about once a month as a maintenance issue

@BStride 8 ай бұрын

Good tip, vinegar has many cleaning uses

@imdjc4 11 ай бұрын

'Cause away goes troubles Down the drain I said away goes troubles Down the drain

@antonylord3088 7 ай бұрын

Checked your floater....ha!

@momsmpm 7 ай бұрын

Did & it is fine!

@momsmpm 7 ай бұрын

If you watched the video everything was working but the jets were clogged.

@antonylord3088 7 ай бұрын

@@momsmpm in the UK a floater is a turd.

@BStride 8 ай бұрын

How old is the toilet?

@momsmpm 8 ай бұрын

1970

@rrock2025 11 ай бұрын

jets*