How-To: Paint A Weathered Body

No video

How-To: Paint A Weathered Body

Рет қаралды 39,908

Күн бұрын

Ever wonder how to get that weathered paint look on a polycarbonate (Lexan™) or ABS hard plastic body? Well, I'll show you how. In this video I'll go over in detail what you need and how to get the weathered paint look. The method is the same for both polycarbonate or ABS plastic bodies and it's all super easy. So, follow along and learn.
VIDEO KEY POINTS
What You Need: 1:17
Masking The Body: 6:51
Polycarbonate Specific Masking: 8:00
Begin Paint Process: 13:13
The Weathering Process: 15:19
Final Details: 24:15
Follow me:
IG: @MyBuildProjects
FB: mybuildprojects
Shop: www.shopbuildprojects.com
SUGGESTED ITEMS
Tamiya Masking tape
tinyurl.com/ta...
Rust Oleum Red Primer
tinyurl.com/Re...

Пікірлер: 73

@theSkavenger84 2 жыл бұрын

Excellent video! But damn it put a battery in that smoke alarm 😂😂

@CarlCoxArtist 2 жыл бұрын

Thank you for all the detail!!! I kept stopping trying to figure out which of my smoke detectors was beeping ;)

@FattyMattyG46 3 жыл бұрын

Great tips for painting! But change that smoke alarm battery 🤦‍♂️

@MyBuildProjects 3 жыл бұрын

It's been changed. I didn't realize it could be heard from the other room until it was too late.

@wakilorokunle9650 2 жыл бұрын

I thought it was mine chirping

@the.just.able.biker67 10 ай бұрын

That has to be one if the finest weathering jobs I've ever seen.👍 Like you mentioned some people go too far on the raised bits and using a sharpie round all the panel lines, and the end result looks completely contrived. I'm subscribing. 👍

@glensegarra7187 3 жыл бұрын

... that Pro tip on the dishes and good towels... 😂😂😂.. awesome! Subscribed! Thanks for the totally low key straightforward video. Really loved it man.

@MyBuildProjects 3 жыл бұрын

Thank you. I know it's been a while, but I do plan on doing more videos on a regular basis. With the whole covid thing, it's been tough to get some quiet time to record videos.

@nateg4513 3 жыл бұрын

Awesome vid bud. Just the effect I wanna replicate on my 73 ford bronco body for my gen 8. Being an automotive painter and using wet sandpaper all my life, I will pass a small tip along for u to try that may make the sanding process easier and save sandpaper...using an scotchbrite pad folded in your paper helps keep it from clogging up, as well as less pressure is needed for the paper to cut, and keeps it from wearing and clogging up. I have had to wetsand complete cars and this lil trick saved me hours. The fj turned out amazing and thank you for passing along the knowledge on this painting process. 👌👍 Keep the greasy side down 🙃✌

@MyBuildProjects 3 жыл бұрын

Ahh, good tip. Thank you. I'll keep that in mind.

@dalenewman6733 Жыл бұрын

Nice vid. Btw, if you use a little washing up liquid in your water bucket, your sandpaper won't clog😉👍

@rccrawler70 4 жыл бұрын

Excellent video my Friend .. Very Good Technique and very well explained .. Greetings from Indianapolis IN.

@DelightedCuttz Жыл бұрын

Cool!!✨ I just got a JConcepts Creep body for my Axial scx10 ii and was thinking 🤔 then my Son suggested to paint it like the Tow Truck from the Cars Movie...lol I'll show you!!

@aaronlane4346 5 жыл бұрын

its like something out of a dream... awesome video!!!!!!!!!!!!!!!!!

@aaronlane4346 5 жыл бұрын

its like mr rogers and bob ross had a beautiful love child.... subscribed!!!!!

@MyBuildProjects 5 жыл бұрын

Happy little rust spot right here.

@falconaz 2 жыл бұрын

Good and bad. Very happy with the result I got following your technique on both videos. I painted a lexan body. Very unhappy with how the paint adheres to the outside of the body. I washed the body and used a brillo pad during the process. Was very particular about letting the body dry prior to painting. I think I will have to use more aggressive cleaning/scouring pads. The Rust-Oleum has to adhere a lot better then what I have experienced.

@eskimojoe6564 4 жыл бұрын

Really helpful video.I bought a used painted bodie that’s dented with paint chips.This will help me give it that weathered rugged look. Thx so much :)

@StratRC 5 жыл бұрын

I've been waiting for this video since you mentioned you were going to do one on insta and you really knocked it out of the park! Thank you for going into so much detail explaining everything. Would have loved to see you actually do some of the finishing touches you talked about at the end as well. I'm particularly curious about the soft lead pencil for the panel lines... Do you have to redo that occasionally, or does the matte clear seal the lead in pretty well?

@MyBuildProjects 5 жыл бұрын

You're welcome. I'm glad you enjoyed it. I tried to cover as much as possible so those who are new to painting can follow along as well. I'll do another video on detailing bodies. This one was just running long already. Regarding your question, the matte clear will set the lead. You shouldn't have to redraw the lines.

@StratRC 5 жыл бұрын

@@MyBuildProjects That's awesome! I'll give that a shot because I've done the sharpie thing in the past and it never looked quite right. Thanks!

@RevolutionX 5 жыл бұрын

Excellent work!

@rctraction4423 5 жыл бұрын

Great how to video! Very well done Sir! 👏👏👏

@MyBuildProjects 5 жыл бұрын

Thank you so much.

@nj2033 4 жыл бұрын

GREAT video! Excellent detail... Thanks!!!

@arni7810 16 күн бұрын

Awesome!! On the RGT challenger 1/10 rc with soft shell body...how can I remove the gloss off the green paint to make the green matte? And do I need to paint a rust color in the inside of shell to have it come out rust color when it scratches?😮 ty

@Ambassador_001 2 жыл бұрын

Great Video 👍🏼👍🏼

@brickbros-m41a 3 жыл бұрын

I like what you did with that cr12

@MyBuildProjects 3 жыл бұрын

Thank you.

@RC-Crawlers 3 жыл бұрын

Well done and very helpful! Subbed!

@caljader3388 3 жыл бұрын

Great vid!🤓👍

@rcpete7055 3 жыл бұрын

Should put some b roll @the end of the video? Always good to see finished product 👍🇬🇧

@MyBuildProjects 3 жыл бұрын

Yup, unfortunately, the body was for a friend of mine and he took a while to get the body mounted and hardly drives it.

@tmdario 5 жыл бұрын

great tutorial, thanks

@arnepielhoff8073 3 жыл бұрын

I use the sandpaper befor i paint, to roughen the surface, so the paint sticks better, could a cherokee body for my crawler.. nearly the same taktic, whitout the weathering, but whit silver under the body, so if it get skretched.. it show bare metal now ;-) and the paint from the outside don´t flake at all... sticks perfekt whit roughen it up first.. just used tamiya colors

@Hjerte_Verke 3 жыл бұрын

Be careful weathering the white tops of these FJ40 Land Cruisers. The originals were fiberglass, so rust is not realistic. It’s a similar nitpick to rusted out Land Rovers wherein the originals have aluminum bodies... :^D

@MyBuildProjects 3 жыл бұрын

Good point.

@paulus842000 2 жыл бұрын

Nice video, what would you recommend for denting in a polycarbonate body for a more abused crawler look?

@TangodownNZ 3 жыл бұрын

Great video, 🙏

@MyBuildProjects 3 жыл бұрын

Thank you 🙌

@kbrc1345 3 жыл бұрын

Hey buddy just subscribed have a question about the Rust-Oleum paint can't find any olive green in tamaya but I'm really rough on my vehicles that Rust-Oleum won't peel off videos cool bro

@reiniersanchezgaviero1243 3 жыл бұрын

Hi and happy new year,how the paint not made for lexan can't peel off from the body?

@ocastillo6174 4 жыл бұрын

If I was to do a matte black color would I have to use the white satin too??

@Ivanpah1337 3 жыл бұрын

Awesome video! No chipping when using those rustoleum paints? I know if you use TS paints there’s chipping If the body gets hit.

@MyBuildProjects 3 жыл бұрын

I haven't had any issues on any of the bodies I used this paint on. It's made for plastics, so it flexes. The TS paints don't flex which is why they flake off. Cleaning the body properly is key.

@BryanCollinsSocial 3 жыл бұрын

great video. may use a bucket or turn water off and on. lots of waste

@MyBuildProjects 3 жыл бұрын

Yeah, I got caught up in what I was saying I didn't turn the water off.

@asian-ugrclab2367 4 жыл бұрын

Great video and it definitely helped me do my first weathered body! Question though..........how do you make the decals "weathered" so they don't look so shiney?? TIA! 😁

@nateg4513 3 жыл бұрын

I believe to 'weather' the decals, you apply them to the body then apply a coat of matt clear coat over the whole body to blend them in bud. 👍✌

@dudernewton4194 3 жыл бұрын

Great job! Do all the weathering materials work on decals? I’m afraid of weathering a body and having new looking decals on it. Thx

@MyBuildProjects 3 жыл бұрын

Good question. That's something I should cover in a future video. There are ways of weathering decals.

@user-6tfvk70k78 2 жыл бұрын

Hi, what body is this?

@Indy64738 3 жыл бұрын

Great!!! Nice job! Do you know what kind of material are the WPL shells? It doesn’t look like lexan or hard plastic either...

@MyBuildProjects 3 жыл бұрын

I believe they are ABS plastic. The same plastic (or very similar) used for scale models and RC hard bodies.

@Indy64738 3 жыл бұрын

@@MyBuildProjects okay thanks

@dob1133 3 жыл бұрын

So I’m painting my first RC body. I got the correct primer, but got paint from Tamiya labeled TS. Will that still work? I also think that about shooting a clear coat over it.

@MyBuildProjects 3 жыл бұрын

No, the TS paint is for plastic models. Unless you're painting a hard body and not polycarbonate (Lexan™).

@zevindd 3 жыл бұрын

FYI, Element RC seems to have "barrowed" some of your footage for their most recent "Trail Tip" intro on painting bodies.

@MyBuildProjects 3 жыл бұрын

HAHA, I'm glad you noticed. I'm the guy that edits those videos as well. I used my own clips for the Element Trail Tip video.

@FeelGoodND 3 жыл бұрын

Love the antenna. I went to your site but did not see it anymore. So sad.

@MyBuildProjects 3 жыл бұрын

The antenna's are now in stock.

@thekracken4572 2 жыл бұрын

Update. It's 2 years later and his smoke detector is still beeping. Lol

@villagranvicent 4 жыл бұрын

Do you really need to waste that much water?

@brianmedeiros9774 4 жыл бұрын

I was going to say!🤣🤣🤣 35 gallons at least!!!!

@meazy451 3 жыл бұрын

Water is never wasted. It continues through the water cycle. It never goes away.

@rcpete7055 3 жыл бұрын

Looks like you've been running down Zombie's 🧟‍♂️ thumbnail looks like blood 😊

@brADHD 2 жыл бұрын

aye bro i hoped you have changed your batteries in your fire alarm by now

@mikeshiflett1562 9 ай бұрын

The smoke detector has to be dead by now.😛

@davidkline4372 3 жыл бұрын

Clean the dishes in the sink and don't use the good towels... I can see your wife yelling at you. Hahahahaha

@user-rs8sp7wh6b Жыл бұрын

holy shit the music is loud

@thatdudesme2 3 жыл бұрын

Put a new battery in your smoke detector. I couldnt watch the whole video

@MyBuildProjects 3 жыл бұрын

Yeah, sorry about that. It's been fixed. I plan on doing more videos. I'll make sure there's no background noise in the future.