How to Paint Easy Orange Yellow Glow Effects with an Airbrush

How to Paint Easy Orange Yellow Glow Effects with an Airbrush - OSL

Рет қаралды 19,999

3 жыл бұрын

For discounted Warhammer, Miniatures and Hobby supplies (Affiliate link) - elementgames.co.uk/warhammer?...
Artis Opus paint brushes...are epic! - buy them here -
elementgames.co.uk/paints-hob...
This is my step-by-step guide on how to paint glow/glowing effects which I painted on a Necron Monolith - this technique could easily be used without an airbrush too! Just would require some dry brushing. I will be releasing another video in a few days with a guide on the entire Monolith! Subscribe so you don't miss it!
Paints I used -
Vallejo Model White
Vallejo Model Fluorescent Orange
Vallejo Yellow Game Ink
I used this technique to paint all of my Overgrown Necrons. Subscribe to see a guide on how I painted the Monolith!
Check out my Instagram - slayer_mini...
#paintingwarhammer #warhammercommunity #necrons #warhammer40k #warhammerpainting #warhammer40000 #grimdark #new40k #warhammer40kpainting #warhammer #szarekhthesilentking #new40k #40k #wip #indomitus #overgrownnecrons
#vallejo #vallejopaints #gloweffect #miniaturepainting #hobby #necron #necrons40k #canoptek #painting #airbrush #airbushing #wargaming #wargamer #necronmonolith #monolith
This channel is about painting converting and kitbashing miniatures for your warhammer & d&d games, Age of sigmar and warhammer 40k games. I will maybe paint Space Marines, Space Wolves, Stormcast Eternals, cities of sigmar, chaos space marines, painting scale models, miniature busts in the future. I haven't ever tried How to paint NMM. I've done guides on how to paint warhammer, how to paint d&D I may do a conversion guide for Darktide or Dark tide however it is spelled. And in the future I will build and paint some terrain for my miniature war gaming wargaming

Пікірлер: 63

@Ch33so 3 жыл бұрын

This is the technique I use for all my glowing stuff now. Awesome work, thank you for posting this!

@SlayerMiniatures 3 жыл бұрын

Awesome! Glad you liked it :)

@matthewrpenny1 2 жыл бұрын

This is Insane, so realistic some of them do look like little LEDS glowing, can't wait to see your guide to do OSL by brush

@SlayerMiniatures 2 жыл бұрын

Its on the list!

@theswedishcommentor 8 ай бұрын

Me: woooooow Music: woooow

@SlayerMiniatures 8 ай бұрын

Ha!

@thefenrisianssweatshop Жыл бұрын

Just done the internal lights on my warhound using this and I’m super chuffed how they come out mate. Thanks for sharing.

@SlayerMiniatures Жыл бұрын

Oh nice! Feel free to share pics with me on Instagram!

@thefenrisianssweatshop Жыл бұрын

Your tagged now mate. Same channel name as I am here.

@AzimuthWing 2 жыл бұрын

I so can't wait for my airbrush to arrive! Awesome tutorial!

@SlayerMiniatures 2 жыл бұрын

They are so much fun! You will find it hard not to not use it for everything ha!

@RowMio 3 жыл бұрын

Awesome tutorial! perfect for my necrons! A bit of a tip, at 1:45 ish I noticed when pulling back on the airbrush you would release before coming froward to stop the spray from the nozzel and in the past I would do the same and it caused some paint to make its way back behind the trigger section of the needle and caused some clogging. It also helps avoid dry tip or clogging out the front of the nozzel as well so it is just good practice to cut the paint flow but still let the air blow for just a moment before releasing to avoid any of that along with the bit of paint buildup at the tip that can sometimes fling onto a project and ruin it. (You may totally be doing it just fine and it's hard to see but just looking out!) :)

@SlayerMiniatures 3 жыл бұрын

Awesome advice! Thanks 😊 yeah in between spraying I normally spray air to the side away from the model to avoiding this. But sometimes it still gets me ha. I will make a note of your advice for next time! I'm sure it will save me alot of time.

@fartpantsmcgee8493 3 жыл бұрын

I have been waiting for the monolith guide u big legend you

@SlayerMiniatures 3 жыл бұрын

Coming very soon!

@yusefreadi83 3 жыл бұрын

Keep at it!

@liamstaple7389 10 ай бұрын

Nice one Tom. Bangin'

@SlayerMiniatures 10 ай бұрын

Thanks Liam 😀

@user-kn1zv4uc6i 3 жыл бұрын

awesome paint work love your videos

@SlayerMiniatures 3 жыл бұрын

Thanks :)

@budderickson6120 Жыл бұрын

Great vid, cool music and nice calming voice

@SlayerMiniatures Жыл бұрын

Thank you 😊

@joshuatoonen5049 3 жыл бұрын

Thanks dude

@roryhatfield6696 11 ай бұрын

Great job 👏

@SlayerMiniatures 11 ай бұрын

Thanks Rory!

@user-hi1mj4mc3w 3 жыл бұрын

Great video!

@SlayerMiniatures 3 жыл бұрын

Thanks 😊

@d9_1056 9 ай бұрын

Dude that looks amazing. Do you have a tutorial for osl coming from a beam sword?

@SlayerMiniatures 9 ай бұрын

Sorry, What is a beam sword? I've done one for power swords that might interest you

@d9_1056 9 ай бұрын

@SlayerMiniatures it may be the same thing. Beam Swords are from gundam. Similar to lightsabers.

@d9_1056 9 ай бұрын

I'll look for the power swords, thank you

@andrewwilkes9681 4 ай бұрын

Hello Mr Slayer, not sure if you'll reply to a question on a video that's a few years old. But I just wanted to know if: 1) Do you thin your paints with a thinner at all? 2) Could you replace the fluorescent Orange with fluorescent green from the same range and would it still work? 3) Do you swear by game colour yellow ink or would any alternatives work?

@SlayerMiniatures 4 ай бұрын

I try to reply to all messages:) 1. Anything that goes through the airbrush needs to be the consistency of whole milk or thin cream. So I always thin anything that is too thick. Inks and contrast paints are fine as they are. It's normal base paints that normally need thinning. 2. Yellow and green work well together so switching out the orange for green should work. I'd advise doing a test on paper or something first to see what the effect will be. If I was to do a green glow I'd do green and yellow too. 3. The game ink is very vibrant and good, but contrast paints weren't really a thing at the time. Iyanden Yellow contrast paint is just as good to be honest. But it will pool more than the Vallejo ink as contrast is a tad thicker.

@andrewwilkes9681 4 ай бұрын

@@SlayerMiniatures Thank you very much for the reply. Some really helpful information and tips. I look forward to looking through your other videos and I've subscribed to see your future ones.

@Trash_panda_bjj 3 ай бұрын

Great videos! Have you got a video on the top orb too??

@SlayerMiniatures 3 ай бұрын

Thanks! The tip orb was done with a white drybrush over the orange. Then yellow ink. That's it!

@Trash_panda_bjj 3 ай бұрын

@@SlayerMiniatures perfect, thank you 😁🤙

@christian2809 6 ай бұрын

Do you take any special consideration making what is not hit by the light darker? More shadows to create bigger contrasts?

@SlayerMiniatures 6 ай бұрын

I try to work out where the light would hit and where it would cast shadow and only paint the glow in the light parts. Leaving the shadow the original paint colour. If you darkened the shadow more than the original colour I think it would look odd and not blend in with rest of the paint job.

@cilice13 8 ай бұрын

Amazing effect and amazing video! Just the right length for convenience. Do you have any recommendations for attempting a green glow with this method? The white and fluorescent green seem obvious, but that yellow is really what makes it pop, and the yellows I've tried don't play as nicely with the green as they do the orange. Should a green glow just be green and white with no yellow tint?

@SlayerMiniatures 7 ай бұрын

Glad you liked the video:) for green I'd probably experiment with green base, white highlight (same as this video) and maybe mix in a bit of yellow to the green. That should really make it pop. Alternatively you could use the Tesseract Glow or Hexwraith Flame paints from games workshop. They will make any white highlights very bright and any be darker in non white area

@autowaaagh 9 ай бұрын

What was your technique for thinning the Fluorescent Orange for the airbrush?

@SlayerMiniatures 9 ай бұрын

Just the paint and some airbrush thinner. That's it. It needs to be as thin as milk

@vip3rz200x 3 жыл бұрын

Is there a way to do this without a airbrush and get the same effect? great backing track too btw

@SlayerMiniatures 3 жыл бұрын

Yes, it would be easy. Same as in this guide but with drybrushing instead of spraying. I'll do a guide on this too :)

@fenderkidd Жыл бұрын

This is a bit older but do you remember what you used for base layers on the model itself? Working on the terrain for Nemesis and this would look sick on them.

@SlayerMiniatures Жыл бұрын

Yeah I've done a guide on overgrown Necrons. All the paint scheme and list of paints is in there.

@fenderkidd Жыл бұрын

@@SlayerMiniatures so you did, thank you!

@hoshi314 Жыл бұрын

i only have fluorescent orange and yellow, can i replace the game ink yellow with fluorescent yellow?

@SlayerMiniatures Жыл бұрын

You can use whatever colours you want. I'm not sure how they would work though as I've only used the ones in this video

@90bubbel60 Жыл бұрын

just curious, what size of nozel would you recommend when doing necron energy overall (i mean, the normal warriors, overlords and vehicles,) i have been looking at a 0.3mm but not sure if its to big for normal units

@SlayerMiniatures Жыл бұрын

I size of the nozel doesn't make a huge difference in my opinion. It you can control how much paint comes out with practice. I use iwata airbrushes which are all 0.3 I think. Hope that helps

@90bubbel60 Жыл бұрын

@@SlayerMiniatures i see, ty

@nachtensturn1634 3 жыл бұрын

Can you do this in blue?! What colors of blue? Working on a Thokt Dynasty...Ty!

@SlayerMiniatures 3 жыл бұрын

I did a blue glow before with Nihalik Oxide and white. It looked great.

@lare2779 Жыл бұрын

@@SlayerMiniatures - hi, sorry to necro an old thread but I'm thinking of doing this in blue. When you say you used nihilakh, how do you mean? Did you do blue fluorescent and then use nihilakh in place of the ink in the last phase? Thanks in advance.

@SlayerMiniatures Жыл бұрын

@@lare2779 so I painted a blue glow effect; starting with nihalik Oxide paint from games workshop. Then did a very small white highlight in the middle. That's it. Hope that helps :)

@lare2779 Жыл бұрын

@@SlayerMiniatures - thanks for getting back to me! Very much appreciated.

@samr2021 2 жыл бұрын

Hey man, how much do you think these down and what thinner do you use?

@SlayerMiniatures 2 жыл бұрын

The fluorescent paint was probably 1-1, same for the white. I just eye ball it. You want the consistently of single cream. The yellow was not watered down at all. Hope that helps

@samr2021 2 жыл бұрын

@@SlayerMiniatures Thank you so much for replying! I'm going to get some Vallejo airbrush thinner and use that and try your technique out!