How To Paint Silicone

Рет қаралды 9,925

5 ай бұрын

In this tutorial we demonstrate the basics of silicone painting and show a very simple approach to painting silicone masks, dolls, medical simulators, and SPFX props.
We used SAM-32 and diluted it with OSS for painting. All of these supplies are available on our site:
SAM-32: www.brickintheyard.com/produc...
OSS Solvent: www.brickintheyard.com/produc...
Silicone Pigments: www.brickintheyard.com/collec...
SFP Powder: www.brickintheyard.com/produc...

Пікірлер: 49

@juggalojack13 5 ай бұрын

Just in time! I've got a project coming up that will need this. Thanks so much

@bitymoldsupply 3 ай бұрын

Excellent!

@theSun.faceSouth 5 ай бұрын

Great tutorial, thank you

@bitymoldsupply 3 ай бұрын

You are welcome!

@mcctigerfan 5 ай бұрын

Super informative and interesting.

@bitymoldsupply 5 ай бұрын

Thank you sir!

@ewen832 5 ай бұрын

Very impressive. Thank you.

@bitymoldsupply 3 ай бұрын

Thank you too!

@wemaketotempoles 5 ай бұрын

Great info

@bitymoldsupply 3 ай бұрын

Thanks!

@ishtarlex 29 күн бұрын

Great! I would like to paint my first platinum reborn, can you help me by telling me the list of necessary products I shall use? I already have special colora for silicon but I am not sure what shall I use to mix them and fix them .... Thank s so much. I have always used acrylics, oil, watercolors,....this woould be my firts reborn painting 😅

@bitymoldsupply 28 күн бұрын

What we use in this video is it: SAM-32, OSS Solvent, and silicone pigments. There are links in the video description and additional resources on our website. Thanks for watching!

@mohamedarifi8185 22 күн бұрын

If I want to replace the sam with platinum silicone as a paint based for best results what is the closest form to it ,even if you haven’t try it Cuz it’s too small for beginner like me😅😅

@bitymoldsupply 22 күн бұрын

You can also paint with 5110F provided you do the painting as soon as possible after demolding the original 5110 or 5110F cast. kzfaq.info/get/bejne/d853ZLSbq9-3eYk.htmlsi=7572JAvzQmXLnpKf

@benwatford3068 2 ай бұрын

Would silicone caulk work as a paint base? Or would it not bond to platinum or tin-based silicone?

@bitymoldsupply 2 ай бұрын

It depends on the type. There are a lot out there and some do not bond very well. Test first.

@benwatford3068 2 ай бұрын

@@bitymoldsupply anything I should look for

@jackiebarrett3211 Ай бұрын

Are you selling SFP right now or just the aerosil?

@bitymoldsupply 28 күн бұрын

We are out of SFP right now but we'll have it back in stock soon.

@mohamedarifi8185 3 ай бұрын

If I casted my piece with 0030 or 0050 can I replace the sam-32 with 30 or 50to complete my panting as paint base? What is the replacement for silicone solvent is ethanol will do

@bitymoldsupply 3 ай бұрын

I have not tried painting with the OO30 or 50 as a paint base. Not to say it will not work, just have not tried it. The main difference would be a much longer drying time that could be accelerated with a heat gun. I have not tried Ethanol, but silicone chemistry is very sensitive so you must test what ever you use to make sure it will work and not break down over time.

@mohamedarifi8185 3 ай бұрын

Thanks a lot By the way do you reach out and deliver to other countries like Egypt or l should with deal with any mail

@bitymoldsupply 3 ай бұрын

Unfortunately we only ship within the US.@@mohamedarifi8185

@mohamedarifi8185 3 ай бұрын

@@bitymoldsupply thanks again 🫱🏾‍🫲🏻💕💕

@ScenematicArts 2 ай бұрын

What gel is ideal for making a fetius(fake baby) is it plastil gel 10 A and B or Gel 25

@bitymoldsupply 2 ай бұрын

5100 or 5110 would be ideal for a doll. The 5100 is the softer of the two.

@tjwoodworth8631 4 ай бұрын

I'm so confused after watching this.... you put finishing powder on with no silicone wet base??

@bitymoldsupply 4 ай бұрын

Yes. It is a very simple process., no need for confusion.

@Babydaxanddollies 3 ай бұрын

How come you didn't add A &B

@bitymoldsupply 3 ай бұрын

@@Babydaxanddollies SAM-32 is a 1 part, air drying silicone adhesive.

@sabrinavaldez2554 17 күн бұрын

Are resin pigments ,silicon?

@bitymoldsupply 14 күн бұрын

Our polyurethane resins can be pigmented with PolyPig colors. The pigment must be compatible with the base oil of the material to which it is being added.

@HauntedApparel 3 ай бұрын

How can I make my silicone more bloodier

@bitymoldsupply 3 ай бұрын

I'm not sure what you mean.

@HauntedApparel 3 ай бұрын

@@bitymoldsupply how can I make my silicone peice look bloody instead of pinkish like in In the video

@bitymoldsupply 3 ай бұрын

@@HauntedApparel The piece will be whatever color you paint it. You do not have to paint it the same color as me. This is an example for a video.

@touchofcee_naturale 3 ай бұрын

Hi, how do I melt a silicone skin?

@bitymoldsupply 3 ай бұрын

You don't. Silicone will not melt, at least not at any temperature you would want to generate. It would probably just burn at very high temp. If you want a skin material that can melt, look for a soft Vinyl.

@touchofcee_naturale 3 ай бұрын

@@bitymoldsupply Thank you 🙏

@emmamarx9284 4 ай бұрын

Awesome videos! I’m learning so much!! Question: Is it body safe after painting? Like, for say.. silicone sex toys?

@bitymoldsupply 4 ай бұрын

I'm not sure what kind of test would be required to determine that. I'll ask around.

@CatherineSTodd 2 ай бұрын

Great techniques and video, but wish we could see some models without "blood and guts" and human destruction! I'm sure some people don't mind (especially the guys?) but for the more "sensitive delicate flower"... type like me... Help! Gracias for all the info and can't wait to get started!

@bitymoldsupply 2 ай бұрын

I agree, there is plenty of carnage in the world. Did not intend to add to that.

@tjwoodworth8631 4 ай бұрын

What about parts A and B

@bitymoldsupply 4 ай бұрын

SAM-32 is a one part silicone.