How to Place Sprinkler Heads in an Irrigation Design

No video

How to Place Sprinkler Heads in an Irrigation Design

Рет қаралды 21,593

Prof. Mark Valen

Күн бұрын

Пікірлер: 15

@othneildrew Жыл бұрын

College students using this for an assignment, me using it for an actual project; I love the internet and the new age of learning 😄

@stonehobson2487 Жыл бұрын

This is very helpful for my project. Nicely drawn and explained with a few simple tools. I now know that I need two 360's in the middle.

@prof.markvalen Жыл бұрын

Glad it was helpful!

@heymichaelc 10 күн бұрын

Take into account wind, the longer throws will be more affected by wind, as the shorter ones would not, making your cross over patterns using the longer throws less effected on a windy day, just a thought.

@aktashuseyin 6 ай бұрын

SKETCHUP MAKES THİS DRAWİNG PART EASİER BTW. THANKS FOR VİDEO.

@KaliBlaz 2 жыл бұрын

it is all perfect on paper until you face the reality of water flow and pressure, unless you have some exceptionnel water pressure service at the source, you will never be able to supply all these sprinkler heads with constant pressure or flow. most residential areas have 50PSI, and most sprinklers in the market are not designed to be used according to the reality of residential water supply.

@BadAssDude69 2 жыл бұрын

He's obviously just educating people on how to evolve a good design of a sprinkler system given a set of heads you know you are ABLE to use - clearly, to be thorough, the first step is find out what your flow/pressure limits are and factor that into your design process. This design process obviously assumes that you have the flow rate and pressure to accommodate these specific heads he is referring to. Also, lower flows/pressure can often be accommodated by increasing number of zones. What's your solution?

@chandanmer8851 7 ай бұрын

Hi kali

@chandanmer8851 7 ай бұрын

I'm an irrigation designer from india..i work on landfx. Big fan

@damstr8345 Жыл бұрын

I have a bunch of 2"×20'. Want to run it above ground along the fence. Would it be like a manifold.. or a mistake?

@vmaxxk 2 жыл бұрын

I'm not following how you would have dry spots in overlapping areas (down the middle)? Are they not getting watered twice?

@BadAssDude69 2 жыл бұрын

Generally, a sprinkler puts down less water on the farther reaches of its throw than in the arc closer to the sprinkler head. Research head to head coverage.