No video
How To Plasti Dip Your Rims (THE RIGHT WAY)
Рет қаралды 4,130,192
Күн бұрынSome people may have different ways to plasti dip their rims, good for them. Just showing you guys how I plasti dip my rims, and how I get the results I get. You can see all of my work on my instagram - / throwsomediponit .
Thank you for watching!
@THROWSOMEDIPONIT 6 жыл бұрын
Hey everyone! I just dropped a NEW, FULL step-by-step tutorial on dipping rims. Check it out here: kzfaq.info/get/bejne/mLGDq82Eqta9lZc.html
@maoilgattorosso7704 6 жыл бұрын
THROWSOMEDIPONIT fx
@dynastyggg8718 6 жыл бұрын
Great for flat colors, but gloss does not last..
@bogthaking216 5 жыл бұрын
This shit ugly af 😂
@toddpeterson8362 5 жыл бұрын
Yo how many cans does it take for 4 wheels?
@vitaliyoliyevskiy3329 5 жыл бұрын
The right way would be to take the rim off first
@rafaeljaime4013 5 жыл бұрын
"The right way", shouldve taken the wheels off the car but ok.
@LovelyNelliee 5 жыл бұрын
Rafael Jaime what if you dont fee like doing that...
@chrisxclancy5275 5 жыл бұрын
Nelliee Bee then you’re doing it wrong. What’s hard to understand here.
@sevyn8038 5 жыл бұрын
Is there really a big difference in taking the wheels off...honestly if you take your time and mask properly?
@chrisxclancy5275 5 жыл бұрын
SeVyN yes
@andrewxavier7206 5 жыл бұрын
Chris Golden the reason most people keep there’s on when using a spray can is because they’d have to prop up the wheel anyway so they can shoot straight and not pointed down
@ShinYuzo00 4 жыл бұрын
About getting the spray on the tyres: It's not destroying the tyres. If it annoys you, peel it off easily and after time it will stick itself out so you can peel it also easily. Had it for like some months on them and the tyres didn't had any damages or something like that. Just make sure there is no connection between tyres and rims .
@cyprexx1946 9 ай бұрын
Tires*
@johndelorean7353 8 ай бұрын
@@cyprexx1946It is tyre in GB
@BullyLifts 6 ай бұрын
@@cyprexx1946 different for people in the EU
@mohammadelian7272 5 жыл бұрын
My man does not care about the bmw logo he just went straight in
@devonshaewhyte1123 4 жыл бұрын
Thee Elinaire07bat 😂😂
@thatoff-roaddude9515 4 жыл бұрын
😂😂😂😂I said the same but I think he can pull it off
@Sleepless3 4 жыл бұрын
haha yeah i was wondering why he didnt mask it hahaha
@cleonzenasro2998 4 жыл бұрын
It's because this is not a BMW it's an Infinity so why let a BMW logo ?
@glo714 3 жыл бұрын
Looks better black tbh
@mattyviper9570 5 жыл бұрын
How to plasti dip your brakes, center caps, lock nuts, and tyres..
@andybussa1323 5 жыл бұрын
Probably got overspray all over the wings also
@ruskibruski 5 жыл бұрын
Probably got over spray everywhere
@abedawg94 4 жыл бұрын
Matty Viper major facepalm lmao
@meatsax 4 жыл бұрын
@@paintedwolf8394 but why go through all that?
@blitzcourt5021 4 жыл бұрын
Yeah he didn’t mask anything😂 I mean I guess he wanted everything like that but damn
@toxicfdt2132 5 жыл бұрын
Thought I was about to cry when he sprayed the centre caps.
@snorman1911 4 жыл бұрын
Great thing about dip is it peels off of everything you don't want it on :)
@unforgotten9203 4 жыл бұрын
snorman1911 yea but is sure as hell don’t peel off fabric so be careful if you are painting near fabric fml
@snorman1911 4 жыл бұрын
@@unforgotten9203 Hah! I will keep that in mind!
@unforgotten9203 4 жыл бұрын
snorman1911 np man! It peels off fabric but it stains
@Angela-tq8yc 4 жыл бұрын
Firts take the rim of 2 clean it really good best if you use brake cleaner every time you go over it get clean rags or paper towels Don't use the same one 3 cover the logos 4 cover the tire no matter if is black spray paint and the most important of all is if you take the rim off it gives you a better view to spray evenly if its on wen you move your car the rim walls facing down are not going to be painted right
@thisismyusername6717 3 жыл бұрын
As somebody who has had plastidip for about 4 years and redone it about 3 times i wil give you all a tip. Do way more coats than this guy. I usually do about 7 and one coat of the glossifier. I pressure wash my car and the added layers really really help. Also you may want to mask off the wheels and the lugnuts as the first time i got my tires replaced (with 7 coats on) the dealership guys broke 3 keys for my lugnuts. (I had to buy the next two)
@shimetobago9586 2 жыл бұрын
How many cans do you go through for all 4 rims doing that many coats?
@thisismyusername6717 2 жыл бұрын
@@shimetobago9586 i think it usually takes about 4. When i wrote that comment i was getting them for about $7 a can from walmart
@thisismyusername6717 2 жыл бұрын
@@shimetobago9586 the first couple of coats are done very thinly thats why it doesnt use so much
@ForeignRuntzzz Жыл бұрын
dude its crazy how u literally taught me how to plasti dip my wheels by just writing this comment and this phony posted a whole video and i was super confused on why he left his wheels on and why he was spraying it like shit🤣 thanks man i really appreciate🫡
@thisismyusername6717 Жыл бұрын
@@ForeignRuntzzz glad to be of service. Im still rocking the plastidip and only redone 3/4 wheels from that original comment. It holds if u do it right.
@roughryder5 7 жыл бұрын
A picture of the final product would've been nice.
@THROWSOMEDIPONIT 7 жыл бұрын
LiftOrGTFO Instagram.com/throwsomediponit for all end results
@GilbertodeJesus87 5 жыл бұрын
You think?? 🤦🏻♂️
@chrism.2042 5 жыл бұрын
Not every one has the tools to lift it and do that! Then you’d have to get them balanced once you take them off so this is for the average person dude!
@benjamin-rn5zn 5 жыл бұрын
Chris M. You don’t need to rebalance the fucking wheel oml. You only rebalance it when you get the tire re-beaded
@lilbos1142 4 жыл бұрын
@@chrism.2042 He didn't lift the tire at all
@TheBishop12 4 жыл бұрын
Legend says he’s still spraying to this day..
@CTAjunior 5 жыл бұрын
I had to revise my comment because I do realize sadly some cars don’t come with jacks and wrenches but.. word of advice, always cover the surrounding area (fender, bumper, etc.). Even plasti dip becomes extremely hard to remove when it’s not a thick layer. Plasti dio overspray is as hard to remove as tar spray.
@logananderson2954 2 жыл бұрын
Good gone is great for removing it
@ddking98 5 жыл бұрын
For all the people saying tape the tire off, my buddy just did his SI rims instead of taping off he got a pack of index cards pinch them inbetween rim & wheel works just as well
@snorman1911 4 жыл бұрын
No need just peel it off the tire when finished.
@unknown12076 4 жыл бұрын
snorman1911 nah that takes too long i did the same shit it was annoying
@davidvaldez648 4 жыл бұрын
I did the same thing. I used card stock instead though. Thicker than printer paper but more malleable than the index cards
@AdrianJayeOnline 3 жыл бұрын
you coat the tire first with dip-release, for a PROPER how to, watch Fonzi
@bullshitdepartment 2 жыл бұрын
@@AdrianJayeOnline lol he's just selling his own products
@thomasrainbow 3 жыл бұрын
This is the whiniest teenager comment section I have seen in a long time
@davidgalvez6820 3 жыл бұрын
Seriously!!!! Fuck haha
@LiteralSparkPlug 4 жыл бұрын
After seeing how freaking good it looked I take back the taking tire off car. You do you man.
@THROWSOMEDIPONIT 4 жыл бұрын
🤟🏽
@Mamamia90210 5 жыл бұрын
How are you gonna write “THE RIGHT WAY” in all caps like you know what you’re doing and then not tape off your tires or emblem in the same video 🙄
@ddanbimmer2710 5 жыл бұрын
Lmao I was thinking the same shit
@jayydon1144 5 жыл бұрын
Lml
@ItsNonPacks 5 жыл бұрын
Because plastidip is pretty simple to remove from rims, kinda like tape
@BajaDeezNutz 5 жыл бұрын
Kayserili38ification cause you don’t want that shit on your rubber. I didn’t tape it off when I dipped my rims the first time and I had oversprayed dip on my wheels that just did NOT want to come off completely no matter how much I cleaned them. It gets worse as it mixes with road grime and brake dust. It’s just a mess you don’t want to risk. When I sprayed tire shine on my tires, they didn’t pop as much, or at all if there’s too much overspray.
@jesusmclain6713 5 жыл бұрын
Mamamia plasti dip peels off easily dumbass
@giveitarub7215 3 жыл бұрын
"place rags to avoid overspray on driveway" sprays everything else
@AA-fn9xz 4 жыл бұрын
You literally spray painted over the BMW sign? You know how sick those rims would’ve looked if you left the logo?
@godgunsfreedom8248 4 жыл бұрын
He teared off the dip afterwards
@AA-fn9xz 4 жыл бұрын
GOD/GUNS/FREEDOM makes sense. The logo is cool.
@lifegoeson1007 4 жыл бұрын
GOD/GUNS/FREEDOM why?
@mwsellox7751 4 жыл бұрын
Well his tires look new again. And the back of the rim are probably also a great look. Finished the cars look. What shame
@VanityWraith-Jettajourney 4 жыл бұрын
You cover everything, then peal off the parts you don’t want when it’s dry..
@Hozer2003rsx 8 жыл бұрын
Not the best way to plasti dip rims... Best way is to take the wheel off the car... This is the lazy way... Sry no disrespect. Just saying the truth.
@THROWSOMEDIPONIT 8 жыл бұрын
The point of plasti dip is to temporarily change the color of your wheels and overall protect the original rim from any further road damage. If you were permanently changing the color of the rims then yes, painting the inside of the rim would be necessary. But you get the exact same results doing it either way. And you can see on our Instagram page @throwsomediponit.
@jenny-masterchef 7 жыл бұрын
only u paint one side of the rim.i have motorbike so need to paint both side of the rim.
@TheBalcerman 7 жыл бұрын
This is the dumbest explanation of laziness I've ever seen.
@Unicorn1231997 7 жыл бұрын
TheBalcerman Not everyone has the tools nor time to take off the wheels, just spray and go
@TheBalcerman 7 жыл бұрын
Are you serious now? Tools to take wheel off? You can literally find them in the boot of your car. Time?! 3-5 minutes? Spraying takes like 75-90 minutes (intervals of 15 x no. of layers) Your argument is invalid. What we can see on the video is: "how to plasti-dip wheels the shitty way". You see. I do things right or will rather not even try to do shitty job if I can't do it right.
@Vlamyncksken 6 жыл бұрын
"The result was shit, so I'll just say it was too dark for filming! No one will find it weird that I didn't continue filming the day after!"
@Vlamyncksken 2 жыл бұрын
@Booby Belly No, "nigga" I'm not. Even after three years I'll say with confidence it's a bad video
@waynet8327 6 жыл бұрын
The right way is you should mask the rim emblem perfectly round with painters tape then peel it off when dry, that's how I did mine and it looks better showing the emblem. 2nd you should mask the tire so there's no paint residue on the tire they will flake off when dried and it looks ugly. 3rd you should also cover your car paint next to your tire, the over spray paint will stick to the paint since your car is white, over spray is more obvious, the over spray paint will come off but it's more work taking them out and sometimes from scrubbing too much it'll leave a scratch on the paint.
@joey8083 Жыл бұрын
It’s plasti dip brotha, not paint
@waynet8327 Жыл бұрын
@@joey8083 same, I use the plasti dip and other and I use the same technique as I mentioned. The quality is better.
@joey8083 Жыл бұрын
@@waynet8327 ah I gotcha
@loketiveimau6172 Жыл бұрын
do they have plasti dip but gloss or is that the whole point of "plasti dip"?
@joey8083 Жыл бұрын
@@loketiveimau6172 Plasti dip itself comes out matte. But, plasti dip also has a gloss overcoat that you can spray on the plasti dip itself.
@nickthatch12 7 жыл бұрын
"The right way" my ass. This is the "It's half-assed but still looks nice" method. even if the back of the wheel doesn't show, the dip will last longer if you paint the whole wheel because just painting the front leaves a seam half way that can allow for brake dust, etc. to eventually get under the dip. Plus the overspray. Plus you're painting at strange angles to get the wole wheel and it's harder to see some spots. Plus you're spraying the lug nuts so good luck fitting the right socket on those.
@praetorian1129 Күн бұрын
I thought for a moment I was watching a "rose panther" episode. The background music and the dummy things shown including the title "the right way". Thanks for the laughs.
@vincegpking1 7 жыл бұрын
probably the hardest rims I've seen to paint/clean. Lol looks nice!!
@THROWSOMEDIPONIT 7 жыл бұрын
vince m thanks man
@C0DZombies12 5 жыл бұрын
I got a 1990 Volvo 760 and the rims are a pain to clean when we had them white. It has like 30 small spokes and brake dust made it look horrible, we took it off and we're switching to black so it looks mean instead of classy
@chris.5434 5 жыл бұрын
Wait till he rolls them and realized he did not get the bottom lip or the insides of the bottom 😂 take the wheels offffdf
@andrewkoehn2238 7 жыл бұрын
It would look better if you took off the BMW logo before and then put it back after
@jacobgallaugher 6 жыл бұрын
Why? You can just peel the dip off the logo.
@azerogliev6520 6 жыл бұрын
When you'll start peeling it off the logo - it won't stop at logo - it's a same layer over whole rim - it will peel the rest. It will look like crap with uneven borders.
@jacobgallaugher 6 жыл бұрын
You don't know what you're talking about. You should just stop before you make yourself look any more foolish.
@davek62020 5 жыл бұрын
@Drewe Carlson not if you know what you're doing
@aricroy4258 5 жыл бұрын
plastidip peels bro, u can just peal it off
@AlexHernandez-mn3cl 3 жыл бұрын
I see a lot of you guys complaining about how he sprayed the center cap and tires but are forgetting this stuff is removable lol and he even says it at the end
@richiewalkertenfour 5 жыл бұрын
An incomplete job with terrible soundtrack. 'The right way' lol
@Rippey11 4 жыл бұрын
Just done my wheels and your video was very helpful. Thanks!
@CgBrian 5 жыл бұрын
Did you mean to title this “the wrong way”... just for starters removing the center caps and wheels would be the right way
@bigslimm7 4 жыл бұрын
I would've covered the center caps and the tires and stuffed more plastic inside of the wheel for extra protection. And showing the end result would help. My only question is should each wheel take one whole can?
@urbanpeltier1622 Жыл бұрын
Yea man cover the center caps i agree
@clint25n 2 жыл бұрын
"How to plasti dip your rims the right way" Proceeds to leave the wheels on the car while plasti dipping.
@dennisweber4640 3 жыл бұрын
Thank you taking your time to show us your method and techniques. I was wondering why you put the spray can bottles in a bucket of water. Is that warm water? Does this help with the plastic consistency? I have never done coating, and I am new, but want to explore this option. Thanks again.
@tommyvlahopoulos5009 2 жыл бұрын
He writes on the video that it expands the molecules which helps with an even spray and even mils all around
@mikeygz720 2 жыл бұрын
You can get the same effect from constantly shaking the cab throughout the process
@GlobalDesignHD Жыл бұрын
It's for every spray can. Warm it up.
@Sgt_vlz 6 жыл бұрын
The right way would be to take them off. That way you can do the inside and be able to move the wheel around to make sure you got all of it evenly.
@miguelsalgado1316 Жыл бұрын
Yo I'm Vibing with that JAM. Also great job on the vid.
@MrDamburger 3 жыл бұрын
You don't have to go this intense on it, ive did all my wheels with two cans and it looks beautiful
@xinhengc 2 жыл бұрын
How many coats did u do?
@MrDamburger 2 жыл бұрын
@@xinhengc one lol
@THROWSOMEDIPONIT 2 жыл бұрын
Check me out on Instagram Instagram.com/throwsomediponit.
@cooliodiablo4571 2 жыл бұрын
Yea as long as you’ve got solid coverage you’re good. Plastidip isn’t like regular paint. It’s pretty thick stuff. One to two coats of it is like equivalent to spraying 5-6 coats of regular water based paint. Plastidip is a solvent based sprayable rubber. It’s not paint really at all.
@CHB_98 Жыл бұрын
@@cooliodiablo4571does it cover flaking on rims or the rims have to be sanded first before putting this dip on ?
@EM-iv2id 6 жыл бұрын
Thank you tons. I’m about to do this myself today wish me luck lol.
@hartzland7658 6 жыл бұрын
Don't do it!!!
@albertM2024 3 жыл бұрын
Can i see
@davidtune1065 3 жыл бұрын
Lmao lmk how that works out
@Hewkll 7 жыл бұрын
Best video on KZfaq for this! Clear instructions, good example and no useless introductions and product placement like other videos
@THROWSOMEDIPONIT 7 жыл бұрын
Hewkll thank you !
@Gillah_Ville 2 жыл бұрын
He did that🔥
@kcjamesmiller Жыл бұрын
You lost me leaving the wheel on the car 😂
@DevineDigital 5 жыл бұрын
Lol, or just take them off the vehicle for a few minutes. EDIT: Sorry, not trying to be a jerk, it's a good idea for those that don't have the tools to take a wheel off, but definitely not the right way. For those curious on a more appropriate way, remove the wheel, clean thoroughly, mask off your tire with painters tape and paper if needed (yes i know it's platidip still do it.) spray light even coats, once the area is fully covered and dry take your tape off carefully, then put the wheel back on the car. Enjoy your long lasting plastidipped wheels!
@toddpeterson8362 5 жыл бұрын
Yo, how many cans for 4 wheels?
@demon22slayer 6 жыл бұрын
This is exactly how NOT to paint rims lol. Overspray in the tires ,wheel wells and the car itself. Wow
@lil3unnyfoofoo490 6 жыл бұрын
eric muraca its plasti dip, you can peel it off...
@user-dg4co2ei2n 6 жыл бұрын
eric muraca hahahahahahahahaha ALL STUPID!!!!
@TheModAddict 6 жыл бұрын
Good thing its not paint
@whhitestallion 6 жыл бұрын
Except it doesn’t come off as easy when there’s a million little black dots from overspray on your cars paint job. I’ve done it. Learned my lesson after the first wheel.
@HHGHEADSHOT 6 жыл бұрын
If done after reading instructions,its perfect.done motorcycles and rims,about 27 months on last bike before wanted a change..And as far as over spray Mircofiber cloths take it right off..you must not read...and prep is everything.
@chiefbig6459 4 жыл бұрын
Use rubbing alcohol to take the oils of the cleaner off. Take the rims off the car. Deflate tires if you can’t take them off. Remove center cover. Use real paint because spray on plasti dip will peel and crack remove wheel weights because dip will just bridge it leaving air to bubble. Just a few recommendations if we’re talking the right way
@Jesus327 5 жыл бұрын
This is good for someone who can’t take the wheels off due to my age and not having a job nor tools......teen....... this is very budget friendly solution for a temporary paint.
@jokerzwild106 7 жыл бұрын
I did mine "the right way". I took them off the car. Plus my lug nuts are still chrome. Looks better that way i think.
@idocta12 5 жыл бұрын
BMW drivers be like " i BoUGhT NiCE cAr so NoW IAm meCHanIC"
@tiyukitv6508 Жыл бұрын
The best video i watched about plasti dipping... no talking about the obvious. Juts simply showing us how to do it. Thanks bro. keep safe always🙏✌
@THROWSOMEDIPONIT Жыл бұрын
Thank you bro!
@johnaranjo2059 4 жыл бұрын
Okay within two second im already laughing guy said the right way, then cant even take his tire off.
@shaqp8812 6 жыл бұрын
Omg this looks like an all day project but I'm gonna try it out. it looks so good!
@THROWSOMEDIPONIT 6 жыл бұрын
Shaquiya Parker you got this!
@MisterEO_YT 4 жыл бұрын
I reported this video as “spam or misleading”
@dthigs2532 4 жыл бұрын
Just put some tire shine on tires and peel off when finished. No tape paint won’t stick to tire shine.
@bj-bo6xb 4 жыл бұрын
Can you go through the automatic car wash with plasti dip on or will it mess it up
@AdnanMohammed-lt8qq 6 жыл бұрын
How long does this last for? Like does it fade away or scratch off or wipe off from rain etc??
@billyblurton4803 4 жыл бұрын
The title should be “how to plastidip your wheels the WRONG way “
@llNATEDOGGll 4 жыл бұрын
Bro....where is the before and after at the end of the video? Lol Looks tough as hell though
@THROWSOMEDIPONIT 4 жыл бұрын
Check out my IG for before and afters instagram.com/throwsomediponit
@kooljj999 Жыл бұрын
Did you use matte black plasti dip then applied the glossifier after or did you buy the glossy black plasti dip to begin with?
@AnthonyRodriguez-wk4ep 5 жыл бұрын
My boy plastidiped half the tires as well 😂😂
@Ncoconstruction 5 жыл бұрын
Ensures longer tire life
@AndFuckYuToo 5 жыл бұрын
The tires are black anyway
@urbanchillerTM 3 жыл бұрын
This is like The Verge's video on how to build a computer.
@despairfollows591 3 жыл бұрын
This needs more likes
@SlinkyBKZ 6 жыл бұрын
fuck the haters bro! this looked great!
@humanblockhead5726 4 жыл бұрын
Great video 👍🏻 How many cans does it take per wheel ?
@rodgercostello9814 3 жыл бұрын
I would have thought the scuffs would have been sanded down in prep for spraying but looked ok to me , might give it a go myself.
@cooliodiablo4571 2 жыл бұрын
It’s not that kind of paint smh, it’s plasti dip you don’t have to sand.
@rodgercostello9814 2 жыл бұрын
@@cooliodiablo4571 like sound of that even more
@shanejones5885 4 жыл бұрын
"Plasti dip your rims the right way" ...oxymoron.
@lowlifeangler 4 жыл бұрын
Getto way
@stuartspencer1652 2 жыл бұрын
No...... Just a Moron
@davefilms345 6 жыл бұрын
Nice job, but I would of masked of the bmw center cap and that would have looked alot more better but they still look nice though
@dailytuning 4 ай бұрын
Painted it too, very pleased!
@led_farmer 4 жыл бұрын
The right way would be removing the wheel and tire for my car
@Sillyboy9572 6 жыл бұрын
How to make the video better ♤ 1: Remove the wheel off the car 2: Should of masked off the body panels incase of over spray 3: Choose better music next time
@Prokop80 5 жыл бұрын
Wieś tuning w najczystszej postaci. Gratuluje, kolejny Sebix. Well done, haaaahahaaaaaa, uhahahaaaaaaaaa.
@infamousluis3391 5 жыл бұрын
To make life easier just take the dayumm wheels off the whole video for one rim dayum.
@jarana10 3 жыл бұрын
quick , simple and straight to the point. nice video!
@GlobalDesignHD Жыл бұрын
Did you make the video and is this your second account or something.. He didn't take off the wheels, didn't even bother to do the last steps because it gets dark. For a good video it should be finished at least lol.
@ax3226 Жыл бұрын
@@GlobalDesignHDcalm down Jack… he done it his own way, you do it your long way
@TONESS-jm8nx 5 жыл бұрын
Bro serio!? Where’s your final results?? How we supposed to follow step by step instructions from you when we never see the final outcome? I’m not cappin I appreciate the video I’m just sayin tho, u coulda waited an extra day to post it and upload the finished wheel(s). At least that how I think, I’d never think to do a tutorial DIY, spend all this time on my project, & hold out on my outcome -_-
@Occy1003 2 жыл бұрын
Great video bradda! Just did my rims and they came out great 🤙🏼
@THROWSOMEDIPONIT 2 жыл бұрын
Dope bro! Check me out on Instagram Instagram.com/throwsomediponit.
@noquestion2012 4 жыл бұрын
A lot of haters on here. Looks good to me.
@MizzAngyBaby 4 жыл бұрын
1. tires still on the car. 2. didnt protect the tire itself.
@funkybeatz719 4 жыл бұрын
Angela Cassano dude I cringed to this entire video
@kingkongam3765 5 жыл бұрын
What makes your way, the "right" way? You sprayed the lug nuts, and center caps...
@DavidReyes-vr3sg 6 жыл бұрын
I plasti dipped my style 95 rims last weekend. I gotta say it was the best $25 ever spent.
@chunkxl7995 6 жыл бұрын
has it peeled ?
@DavidReyes-vr3sg 6 жыл бұрын
Donut NationXD nope. drove from Sacramento to LA last night and they still look as good.
@ppepperoni3570 Жыл бұрын
And free speckle finish on the paint, Brilliant!
@TheBIGKNOC 7 жыл бұрын
I'm surprised u Covered the BMW sign good job tho
@THROWSOMEDIPONIT 7 жыл бұрын
erik nelson thank u! yeah you can either cover them and peel it off at the end or pop them off, dip your rims, then pop them back in. after re dipping I suggest popping them out and popping back in for a much cleaner result.
@ChrisDan94_ 6 жыл бұрын
I over sprayed I think and it dripped/smudged fml🤦🏼♂️
@jphillipes8282 4 жыл бұрын
So many of y’all whining about whether it’s the wrong or right way LOL
@ganoking1 4 жыл бұрын
Hey I see a lot of haters on here but I just want to do it cheap and easy this looks it will fit the bill. Thanks going to check out your other video Peace from Canada
@Eno.dc5 5 жыл бұрын
How long will it last?
@bolbiitp7850 6 ай бұрын
1-2 business days after a car wash
@kenny2995 7 жыл бұрын
Bout to go plasti dip my maserati rims for the first time wish me luck
@kenny2995 7 жыл бұрын
Shit went well forgot to update y'all
@86times23 7 жыл бұрын
Kenny Bagnis update
@kenny2995 7 жыл бұрын
Came out perfect, except for a spot i missed since i did it at night time....
@Ghost-KW184 7 жыл бұрын
How many cans did you use? I have 2, should I get 1 more? And how do I get the glossy look?
@kenny2995 7 жыл бұрын
☆кυωαιтι - єαgℓє☆ i think you should get one more just incase , I only used like 60 percent of each of the four cans I have , I didn't go for the glossy look and went just for the matte look (: so I didn't apply anything else
@ftex-rw2hm 5 жыл бұрын
You got over a million views on how to plastidip your wheels, rotors, calipers..... Impressive...
@Hwan.421 3 жыл бұрын
Just did this turned out great! 100 degree weather ain’t gonna stop me
@THROWSOMEDIPONIT 2 жыл бұрын
Fire! Check me out on Instagram Instagram.com/throwsomediponit.
@silvestregonzalez5851 7 жыл бұрын
Good shit bro gonna dip the rims on my 325 now
@mrflyingsourcer3515 5 жыл бұрын
The right way would be to take them off and get them powder coated, which is still removable and is 1,000,000,000x more durable than Plasti dip. But ok.
@riskytime 2 жыл бұрын
Yo "It got dark?" Sorry, guys. But, it got dark outside. Y'all know how I be gettin' afraid of the dark and stuff. Anyways, enjoy your NEW black rim!
@realSethMeyers 6 жыл бұрын
I died when he started spraying without taping off the logo
@shreqboi1 5 жыл бұрын
I feel like I just watched a graffiti video. That can play and wrist movements
@davidarreola4652 5 жыл бұрын
He said "The right way" 😂 bro the right way would be take off rim by rim 😭😭😭😭😭
@kennedybj1 Жыл бұрын
thats one way to do it ..but i like taking the rim off then using a deck of old playing cards to protect the tire from overspray
@Bryan1483 7 жыл бұрын
People like to hate, I appreciate the conten., You did a good job explaining the coats needed. Thanks much.
@joeyppppppp2 5 жыл бұрын
Lmao this is totally the wrong way, wmif you want your rims plasti dip the correct way the whole rim has to be painted hence the wheel comes off, unless you don't mind being a ricer😂
@Mr.1ntrovert 7 жыл бұрын
yo brother can you come over and plasti dip my rims lol im scared ill fuck it up, ps nice vid
@soonersdevil 7 жыл бұрын
Yoseph Rahimi its easy
@druu988 6 жыл бұрын
Easier way is taking the wheel off and prepping it then spraying it . Less to worry about with the internal parts of the brakes and what not
@jlazore Жыл бұрын
1st coat is not supposed to cover the wheel entirely. The manufacturer says a light base coat to start then heavier after that.
@Rooot-username 7 жыл бұрын
People be like "Take the wheel off...." not everyone has that time or is capable of doing it. Not everyone is mechanically able to take off the tire
@Shawns_wrx 7 жыл бұрын
Bagged mk5 gti gu
@TsarOfRuss 7 жыл бұрын
This is more easier for me than taking the wheel off, it depends on how one wants to do it.. he got a perfect result at the end anyway
@vincegpking1 7 жыл бұрын
nuggz503 bmw uses runflats, and don't have spares anyways lol
@bamudeadson 7 жыл бұрын
not mechanically able? using a tool on 5 same sized bolts isn't very hard... and it actually makes the process easier
@godbluffvdgg 7 жыл бұрын
shut up stupid, you probably listen to that stupid music too...
@darryldickson4360 5 жыл бұрын
I think "The Right Way" would be taking them off the car
@67mustang351w 5 жыл бұрын
Hahahahha this dude the right way hahahahaha you forget to cover tire in few days plastidip its going to peeloff from tire over spray 😄😅🤦♂️
@jabbaweezy 5 жыл бұрын
Kudos for the Rockie fresh. Seems like nobody knows him lol
@Ktonrider 7 жыл бұрын
Looks real good, nice car, I'm picking up my CTS coupe in 4 days, can't wait to dip the rims
@UKNOKENNY 7 жыл бұрын
Ktonrider that's gonna look sick!
@Ktonrider 7 жыл бұрын
Thanks Man!!!!
@kandybeats7447 6 жыл бұрын
Ktonrider did u get it?
@jmula9372 6 жыл бұрын
If it's not a CTS V then u wack
@Trolling85551 5 жыл бұрын
Don’t kid yourself,Your not picking up anything
@rickquest6385 7 жыл бұрын
This is about as far away from the "right way" as you can get! Whats going to happen when you take the lug nuts off? Hint: the paint is going to come off with it, and why didn't you remove the center cap? Not to mention you must now have a TON of overspray all over your car! Please kids, PLEASE don't try it this way at home. Take the wheel off, remove the center cap, mask off the tire, You'll probably need to put some old lugnuts over the holes. Paint the wheels as far away from the car as you can get, control the overspray!
@gsteel98 6 жыл бұрын
I did it this way and there's no overspray on my car. I did get some on the tires but that peeled off
@Ziplinz 7 жыл бұрын
You can mess up a dip job and still make it look good. Unless you're doing it for a car show or something.
BM Sculptures
Рет қаралды 546 М.