How To Polish Epoxy Resin & Get Glass-Like Results With Mirka Deros Sander

Рет қаралды 28,186

2 жыл бұрын

Polishing resin is a STRUGGLE. It takes time and patience and even a little practice. In this video, I show you my personal method on polishing resin. Please leave any comments, questions, or even suggestions below!
Thank you to Mirka for sponsoring this video! I have used my Mirka sander for about 2 years and I LOVE my sander; it's one of the best upgrades I have made in my shop by far!
You can purchase your sander here!
www.amazon.com/dp/B01FRGX53K?...
You can purchase my other favorite products here!
www.amazon.com/shop/stonemill...
Check out my website and Socials here!
www.stonemillandco.com/links
-Mas Epoxies Deep Pour (Code STONEMILL)
masepoxies.com/product/deep-p...
Walrus Oil Cutting Board Oil - Use code STONEMILL
walrusoil.com/products/cuttin...
Walrus Oil-Wood Wax Use Code STONEMILL
walrusoil.com/collections/woo...

Пікірлер: 39

@Gather2Grow 6 ай бұрын

This was so very helpful! Thanks a million for all the tips and info! ❤

@lutonroy 8 ай бұрын

Nice demo, thanks for the grading discs to use

@amyc3628 2 жыл бұрын

Your sanding/polishing tips help me so much!

@stonemillandco 2 жыл бұрын

I'm so glad! Makes it worth it!

@anthonyrivera7815 Жыл бұрын

Awesome video just what I needed!

@flintdesigns7292 Жыл бұрын

Great informative video. Thank you 😊

@TripleLRusticDesigns 2 жыл бұрын

Very good video! I hope this blows up!

@stonemillandco 2 жыл бұрын

Let's hope! Haha. Would be sweet

@MPjdog Жыл бұрын

Love it!

@Vipun_ch 2 жыл бұрын

thanks for the tips. Will definitely be suing them...cheers!

@Vipun_ch 2 жыл бұрын

Using* lol

@stonemillandco 2 жыл бұрын

@@Vipun_ch lol ya no "suing!" Haha but great. Thank you so much for watching and hope it helps!!

@user-qh8iy5sz2g Жыл бұрын

Very nice work skill sister

@JennsTurn 2 жыл бұрын

Great video Cass! I have had the Polarshine for a while and haven’t used it. 🙈I will now! 😁✨

@stonemillandco 2 жыл бұрын

Yessssss! Do it! And thanks for watching!

@TripleLRusticDesigns 2 жыл бұрын

Heck yeah!!

@stonemillandco 2 жыл бұрын

Hehe thanksssss

@giddensre Жыл бұрын

You Rock! Your video drove me to buy the MAS epoxy, and some items on your Amazon resin list. Question: Any tips for cleaning the mixing pails and mixer drill attachment?

@stonemillandco Жыл бұрын

Awe yey! And I let the resin cure in the plastic mixing cups and then I flip them over and gently hit them with a rubber mallet and then squeeze the sides a bit till the resin pops out. Sometimes it’s easier than others. And for the mixers… ha. I just let them drip and cure and usually leave the resin on there. So not much help there!

@Celtic-Warrior Жыл бұрын

We have found that Alcohol and Acetone work well IF you allow it to soak a bit.

@koushalagarwal1185 2 жыл бұрын

Hey ur results are great ! I have never used mirka polarshine Is polarshine 35 enough?? ( As people use 5 ,10 also)

@SaskFisher Жыл бұрын

Is it a special sandpaper for wet sanding? Or just still regular sand paper? Thanks!

@emilywiirre9247 Жыл бұрын

What happens if you wash the surface a bunch of times does that get rid of the polish??

@taurusmoonintuitive5031 3 ай бұрын

Sooo i did the levels & then used the polarshine w/ the 4000 & now it looks cloudy & murky :(

@bigfishbunny77 Жыл бұрын

What kind of sander are you using?

@jefferyf6930 7 ай бұрын

Why do you use the walrus oil on your epoxy finish after you have polished the epoxy? This is in reference to the how to polish epoxy resin, and get glasslike results with Merca video…TY

@CowDogCraftWorks 2 жыл бұрын

I use a little bit of spit and dog hair to get that extra shine.

@stonemillandco 2 жыл бұрын

You would. Whatever works tho

@CowDogCraftWorks 2 жыл бұрын

@@stonemillandco great video though. Your voiceover is 🤌🏽👌🏽

@stonemillandco 2 жыл бұрын

@@CowDogCraftWorks but you're just now listening? 😑😢

@smugroup5161 Жыл бұрын

how to remove swirling on epoxy? moke video on it request

@stonemillandco Жыл бұрын

Ugh unfortunately starting back down at the beginning!

@mariopllumbi3748 Ай бұрын

It's not Mërka but Mirka. iiiiiiiiiiiiiiii not ë!!!!!

@ryanokeefe12 Жыл бұрын

You are wasting a lot of time sanding through the grits.. the first level of paper you use removes any imperfections and flattens the surface. The each of the remaining grits only needs to remove the peaks left by the previous level of paper that was used before it... with an orbital sanding, all grits after the first will only take a few passes back and forth, or 10-20 seconds on each area MAX (this assumes you aren't skipping more than one grit at a time). Any longer than that and you're just wasting time sanding material away and not actual making the surface any smoother. The LOWEST point of the valleys left by the intial grit should theoretically be the lowest point of any other grit to follow, ultimately becoming the finished surface once all of the peaks are removed. In other words, you're removing base material with the initial grit ONLY and flattening the sanding marks with the proceeding grits.. i.e. You're going from this: '`'`'`''`'`'`'`'` to this: _________ in steps like this: ```'`''`'`''`''`'`' -> \/\/\/\/\/\/\/\/ -> VVVVVVVV -> vvvvvvvvvvv -> , , , , , , , , , , -> ________

@johndowns4161 11 ай бұрын

exactly. When you factor in time and materials this would be expensive.

@jefferyf6930 7 ай бұрын

What would be your suggestion for the highest grit to use? 320?

@ryanokeefe12 7 ай бұрын

@@jefferyf6930 for polishing? 2000

@anthonyjriz3 7 ай бұрын

@@jefferyf6930 you'll never get a glass like finish stopping at 320, unless your spraying a clear coat or putting and epoxy top coat. but when you're doing it like in this video I go all the way up to 1500, not skipping any grits, doing 4 passes on each grit going as slow as she is, any if you only do one or two passes you'll never get rid of the swirl marks, then after 1500 , 3 passes with Mirka 45 , 2 with Mirka 15 and 2 with Mirka 5 . that's my process and it works good. if you see little swirl marks after 800 or 1000, sand them out with a sanding block and your hand, then move up to the next grit. good luck !