As buckin’ would say “she cuts eh” seems like a pretty wicked little beast! This was been a such a great series. Thanks a bunch Tinman!

This has been a great series. Alot to learn. I like that it wasn't compressed into 20mins skipping a bunch of stuff. The future looks bright for Tinman's saws

Im glad to see some love for Echos on here

This is the best video series on KZfaq

Sorry, Tinman, we appreciate YOU! This whole series is super.

I honestly can’t explain how much I’ve enjoyed this series. Im only a fairly new subscriber but this is by far my favourite KZfaq page. Keep up the amazing work Tinman 👍🏼 we all appreciate your knowledge

I am IMPRESSED that the saw was still 4 stroking at that RPM in the cut! You can hear that saw changing as the video progresses. I have yet to see a video that goes into this much detail on break in on the KZfaqs. In short this saw is a BEAST!

Watched this all the way thru and rebuilt the top end of my ms660 clone. Just so happy and grateful Tinman thanks for sharing your knowledge. Saw was sticking a ring on a valve and was going to return it. Saved hundreds of dollars and weeks of time, by fixing it myself. Thank you Tinman !

Tinman, Once again, thank you for giving up your time to make these videos.Well done and keep up the good work!

Tinman she's gone from turd saw to terror saw. What an incredible journey! You are a Da Vinci with power saws. Let the good times roll! I just purchased a 355T Echo, with your tutelage she will become an angry top saw🤘

Again you taking the time to teach and help others is awesome. I appreciate it along with many others.

Wow, You built a Beast! Thanks for this series.

Ya know it is the end of Winter when your britches have gone into over capacity mode LOL. Love the tird saw series.

My wife hates me watchin your videos cuz of all the noise... But me.... It's like the music that plays in heaven's elevator lol

“I’ve exceeded the torque capacity of my suspenders” lol love that, keep coming at us with the original content Tinman!! I learn something every time.

Great video bud the series was great I’m sending you walkers suspenders they have better grip than those ones

You don't see many ported echoes very great job buddy she's strong man stand proud you build one HECK OF A GOOD saw TINMAN TAKE HER EASY buddy✊✊✊✊✊✊✊✊✊🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦

Impressive work mate,always like watching u videos, always informative and interesting to watch 😊! Keep up the good work

Wow! That thing throws chips into the next county. Without question the best laid out how to series I’ve seen. From turd to treasure in a few short weeks. Great job Tinman

I have the same saw and have used for about 10 years and has been a great powerful saw and it always needs 5 pulls to get it started first time in season and then it’s 1-2 pulls it’s a very strong saw out of the box.

That beast flat runs! Nice improvements!

I'm the kind of person who has to dive deep into anything I do mechanically. I was a wrench for my first profession before I moved to design engineering. The wealth of information here is quite unusual to me. Like someone mentioned, uncompressed. You get to hear and "feel" the process. The tuning tips alone are such an asset. Really a great job. This is the first time I've subscribed and followed a real time development and I'm hooked!!!

That's good to know about it running rich until the rings seat. I rebuilt my first saw and had to tune my low jet way up. I'll follow your break-in process and see if that helps.

The day has come! Seems real strong. Thanks Tinman!

what a amazing build love to see the echo bucking like a champ

That echo sounds awesome brother! Fine job buddy!

I didn't expect to see a wardrobe failure, lol! 😄 The saw is running great, though👍

Great video! Very informative! And you’re right, everyone’s got a different view on break in. Years ago when I raced bikes, we would pull the plug out, and kick them over 200 times, jet Em and race them. Never had one come apart, but I’ve learned a time since the 80s. Heat cycles mean a lot! Keep up the good work!!

That saw is a beast for its size !

She sounds awesome! Like she is waiting for more. 🤘🤘👍👍

Fantastic video with perfect timing. I have a brand new ms461 and a new echo 620P that will need breaking in when the snow finally melts from the 45th parallel of Ontario.You have taught this old dog a few new tricks.My saw collection most of which are over 25 years old will see a lot more use now that i will be retired up north and heating full time with wood. Going to have to get used to the orange screwdriver in my coverall pockets. Great channel with very informative videos.Bless you and stay safe.

Tinman I haven't the words for the appreciation that I have for you going through this process of porting a 2 stroke... for a visual kinesthetic learner you are laying bricks of gold that can't be had in any other place but your channel (please try to search for it because you won't find it) unless you are one of the fortunate few that are kin or very good friends with someone who does this kind of work on a regular basis

Got to love the Echo once turd saw! I love how knowledgeable Tinman is he really knows so much about engines and is so humble about it

She looks like a hard pulling saw already, I've really enjoyed watching the saw progress from start to finish. I like your idea of fun, playing with Chainsaws 👍

That's a sweet little got rod. Well done

Thanks again Tinman. This vid explained why I had to keep adjusting the carb.

"I Over-Ceeded (TinMan word for exceeded) the Torque Capacity of my suspenders". Love that Kanadianism!

She's a cutter buddy. Great job wow. Love this stuff. Keep up the great port work. 🌲❤🌲✊🪓

Hey tinman she's turned out a real good saw. Grand job buddy.

My new 562 ran itself really rich for the first tank, I though it was going to be the thirstiest saw ever but by the third or fourth tank it really is surprisingly efficient. Really love this new saw.

That thing rips. Man o man. Thank you. Great series brother you ROCK. 💪🏻🪓⚡️💚 Kindness and love

@6:51, last part of the cut, it sounded like it opened up. Sounds lovely

Great job on the Echo. Look forward to seeing it turned up in big wood and hearing your thoughts on this saw verses other ported saws in it's class. Enjoyed it as always.😊👍👍👍

There you have it, don’t overlook an Echo, wonderful series Tinman, thanks a bunch!!!

I just bought a Timberwolf, pulled the limiters, cut the deflector in the muffler. Tuned it rich and ran two tanks cutting firewood running 40:1 91 octane . Still have it tuned rich but switched to 45:1 and ran 8 tanks through it sawmilling cedar and black ash, gained 12 psi in compression. No issues no far, it pulls a 20" bar well. Very happy with Echo, probably one of the easiest starting saws I've ever owned.

Would be great to have a spit screen of before and after in the same wood. To show the difference because it’s huge..

The echo seems to pull well it liked to get ported. Thank for sharing your knowledge you inspire us 👏

That SOB be sounding goooood !

That echo rips awsome job buddy

Great to see the final product in the wood . Saw is amazing and as always thank you for all the great information.

Great job. She sounds crisp. Nice throttle response. Quick to start. Strong pull. That's a great build💪

Man thanks again for tha 14 parts of porting! I am looking forward for more videos from you! :-) Cheers from Hamburg, Germany

So i have owned one of these since 2007 or 2008. Ive cut hundreds upon hundreds of trees with it. Ive abused it with a 36" bar at times, ive milled 28"++ hardwood with it, it still runs extremely well . *i wish mine ran this well!* Also wish you were in the US

very nice to see how this build is doing in the work! she is defenetly a runner! good port work!

Sounds great and rips for breaks in. Reminds me old 42 Stihl In sound Never was near one of that flavor before. Everyone be safe and be careful.

Great series. You have addressed a few questions I've had on my own saws and could not find info on. From breakin to rings seating, carb adjustments and how it all reacts. Thank you!

An awesome ending. She runs!

That saw cuts. Watched from the first how to. Great details.

What a great job bud. Your a pro in my book. Awesome awesome !!! It freakin RIPS!!!

Looks like you have a winner there congrats on a successful port job

Great series, wish I had caught it earlier in the year. Trying to get my hands on a 70 cc saw. My stable goes from 60 class to 388xp to 395xp. Sooner or later I'll find the right deal. Keep at it. An awesome series & channel

Love that saw it runs and sound awesome. I really enjoyed watching the whole process and learned a lot thanks to you.... Thanks brother

Love the videos. It’s amazing how much small changes make to a saw.

Right on brother,sounds great! I’ve got the Dolmar half torn down in the shop just need to find time to start getting numbers. Thanks for the awesome info!

I enjoyed the journey of this saw. She run's great. Nice job on the porting.

Great info as always Tinman, im currently breaking in a new ms500i and ms661!! Gonna try some milling with the 661

Beautiful saw Tinman. Thanks for the journey 👊

Nice job looks great runs sweet that is a perfect work saw right there

Bad ass series ! Loved it! Watched till the end! Only thing that saw was missing was a muffler mod!

Great series. Thanks for taking the time to make it.

Nicely done!

What a great series I really enjoyed watching them keep up the awesome work & thanks for sharing tinnman

Hat's off to ya, that is a great saw. I always loved that echo model look, great job once again thank you so much for all the info.

I have always liked the way u tune an break in ur saws outstanding job buddy. Have a good week.

Nice saw sounds great. Keep up the good work. Thanks for all the sharing you do. Take Care, Stay Safe and Be Kind...

Can see and hear the improvement over stock, that's for sure! Nice job man, gonna rip shit once she's turned up!!! Quite interesting how it changes as the rings seat! 🇨🇦🇨🇦🇨🇦

Wow! Nice work!

Awesome project start to finish! That saw is impressive. Nice job. Thanks for all the info!

Bro you polished the turd right out of it awesome build

Man that saw sounds strong!! Can't wait till u get it full tilt& see what it can do!! Good job!!

Sounds great

Hey Tinman. Thanks for this series👍👍 It‘s awesome and I‘ve learned a lot. I think I‘ll try to port a chainsaw on my own 🤪 Have a nice weekend and ceep on posting this great stuff 👍🤣 Greetings from germany, Stefan

Sweet saw man great broad spectrum power range. High rever, great job buddy, great, always

Nice WOOD time to cut hopefully you drop something with it. I personally have always liked echo never had a problem. I tortured my 300T for 21 years before it overheated. Which was 100% my fault i ran out of bar oil and didn't want to come down fire wooding 14" wood in the tree with no bar oil 🤬🤬. And never had the top end off it was a good saw that i want to rebuild.

WOW what a difference in the before and after in how it performs, great job tinman... The only way that saw could look any better is if It was cutting wood in my hand lol... Great job that is really impressive I can't wait to see it after final tune.

Looking and sounding GREAT !! Seems to eat through the wood !!

Tinman strikes again! That’s a beast! Great job buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

My 670 never ran that good lol wish I still had it but it had a pretty gnarly score on the piston and cylinder. Along with needing new AV mounts. Ditched it for an 034 to 036 build. Might not have the torque of the 670 but she’s a dandy for a 60cc. Wish I could buy every saw I want

so great to finally see her eat some chips!

Great job!!!

That was a great port job you did on that saw.

That echo is going to pull chain when it's turned up. Great video tinman. If I come across the right saw, I'd like to try my hand at porting

She sounds great Tinman!

Love taking turd saws and giving them new life you did a great job on this one tinman

Sounds great! Can't wait to see it rip'n in big wood.

We learn so much thinks about chainsaws.

That saw sounds awesome! With your eyes closed You’d swear it sounds like a nasty 044, NOPE it’s a freaking Echo!! Lol That’s going to be a nice little saw for someone!! Take care Tinman!!

I want one! Haha awsome build series I enjoyed it awsome to come along with everyone

Great video! You have as much as us in the city, east has a fair bit couple weeks back on a ride. Echo sounds gooooooood👌 pulling harder is an understatement from what I have experienced so far lol like an angry animal woke up

Keep up your great work, we love it. Button style suspenders rock! Just saying.