How to prepare a used car door for paint.

Рет қаралды 23,988

Жыл бұрын

Today on Garage Noise. I share how to prepare a used car door for paint. I'll show how you can easily repair chip ,dents, and scratches in your used part. I'll cover sanding and mixing and applying 2k primer to your repair or restoration project! Don't miss it and be sure to check out my other how to videos!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
gunnbud spray gun light
amzn.to/3IeJLKu
3m cubitron2 xtract 320 grit
amzn.to/3xwRpLB
3m cubitron2 xtract 180 grit
amzn.to/3Ibjn4b
3m cubitron2 xtract 80 grit
amzn.to/3XCrGMg
upol clearcoat
amzn.to/3XhGtgj
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Пікірлер: 71

@sajadjb Жыл бұрын

Thank you for teaching. You explain very well and clearly.❤

@GarageNoise Жыл бұрын

Thank you for the support brother!

@marioandrea9566 Жыл бұрын

This video is excellent. Thanks for this. I’ve learnt so much so far.

@GarageNoise Жыл бұрын

Good to hear Mario! I appreciate the comment and support!

@JohnWD40TC02 Жыл бұрын

Hi Chris another very helpful video for us hobby painters, I'm really enjoying these how to videos for filler, primer and block work I feel I'm learning more each time as you always explain what you are doing at each step👏👍John UK

@GarageNoise Жыл бұрын

👍appreciate the comment and support!

@setthehook4me Жыл бұрын

Thanks Chris

@GarageNoise Жыл бұрын

Thank you for supporting the channel!

@sleepe361 Жыл бұрын

Appreciate your work and educating us all. Very detailed explanation of everything. Thank you Sir!😊

@GarageNoise Жыл бұрын

Hey, thank's so much for the comment. It's my pleasure, appreciate the support!

@octanegarage3729 Жыл бұрын

Good video, thanks for the links to get the products you use. it makes it so easy for me

@GarageNoise Жыл бұрын

Appreciate the support brother!

@Vkandypaint Жыл бұрын

Great video! I love your content. I have the mirka dustless system also I love it!

@GarageNoise Жыл бұрын

Awesome! appreciate the support! That's seriously the best tool I've ever purchased

@Danno74Z Жыл бұрын

Hi Chris, Finally got some very nice weather in CO. Going to paint some rims. Using all your information and the A610. The A610 came directly from China and was damaged in shipping. I did get a 100% refund and they told me to keep it. Other than the air regulator/shutoff valve being completely bent over the gun was fine. I took a chance and went to Spray Gunner and bought a replacement valve for $24. So for $24 I have a A610. I will use it with primer first to really make sure it sprays OK. Later Buddy! Happy Easter.

@GarageNoise Жыл бұрын

Awesome! Worked out well! Happy Easter! Beautiful day here in Oklahoma!

@AIR.METALIC Жыл бұрын

Fantastic

@GarageNoise Жыл бұрын

👍Appreciate the support!

@jraposo911 Жыл бұрын

Nice tutorial 😊JR

@GarageNoise Жыл бұрын

👍Thank you!

@willsachs Жыл бұрын

Hey Chris, would this process be the same for a rear door? If not, could you do a video on rear doors? LOL. Thanks, awesome content as always!

@GarageNoise Жыл бұрын

🤣Totally different process for the rear door! 🤣You'll have to wait for the rear door video buddy! Appreciate the comment and support brother!

@impalaman4546 Жыл бұрын

Wow nice now this is what I call a body man he knows ĥis stuff

@GarageNoise Жыл бұрын

Thank's brother!

@NativeSteelPlayer Жыл бұрын

Hi Chris! You have the best content om here for learning to repair Paint and your concise instructions are fantastic! You need to start a Patrion Page so everyone can help out! Since you're taking all this time to help us Newbies! Would be great to get your feedback on small jobs! and be able to post pictures! If we pay for your help as a Patrion member! Thanks for your invaluable lessons! Dennis Sigala from the Gulf Coast of Florida Destin

@GarageNoise Жыл бұрын

I appreciate that and it's something I've considered. The issue is I'm not sure I have enough time to devote to it and I wouldn't feel comfortable unless it was a benefit to my audience. I may tho, appreciate the support!

@bkhawaii Жыл бұрын

Please test your R500/R610 needles and nozzles with water BEFORE using. This is probably common practice to the seasoned painters but my first primer job was a total mess. Used the R610 1.7 tip for primer, the damn thing sputtered and back fed air into the 3M paint cup which started to leak all over due the the air back feeding. Adjusted air pressure at the compressor and the gun regulator, spray fan angles. Good thing it was just primer and I was able to work through the extremely rough finish, felt like a truck bed liner, by sanding with 220, 330 and 600. A ton of extra work. Chris, maybe you can do an episode of how to avoid paint disasters like mine! (; Also another issue, the 610 air valve threads were not catching. I removed the valve assembly and noticed that the shaft was bent causing the threads not to line up. After straightening the shaft the valve screw threads were able to catch and air pressure could be adjusted. I leave it wide open anyway but the all the issues with this gun makes we question the quality control. Needless to say my first painting experience has not been a fun one, but thank you Chris for sharing your knowledge and I have been learning a lot from your videos! (:

@GarageNoise Жыл бұрын

👍

@timbartley5678 Жыл бұрын

I would like to see someone do a video on a 1958 chevy tail gate that has alot of dings and dents so I get a good idea on fixed mine I get frustrated trying to fix mine

@timbartley5678 Жыл бұрын

Ps I have very little feeling In my hands to feal for high or low spot

@GarageNoise Жыл бұрын

That's a pretty specific video. Appreciate the comment!

@robertjuniorr7074 Жыл бұрын

Muito bom e top um dia eu quero trabalhar

@GarageNoise Жыл бұрын

👍

@cwwCADAVER Жыл бұрын

Thank you... I've been waiting for this video for the settings for primer.. how do you think this primer would spray with the 1.7 tip? I also have the 1.3

@GarageNoise Жыл бұрын

I this the 1.7 is a bit large. I use a 1.3 but I use the primer reduced.

@ctreatman 3 ай бұрын

can you share a link to the video where you meantioning cutting in the underside of the door at 14:47?

@edsmith3170 3 ай бұрын

So Da after straightening the pannel is okay?

@ebaystuff2490 11 ай бұрын

I need to paint my 2007 Chevy Avalanche door black. It has faded over the years due to buffing out my dogs nail scratches. Getting crazy expensive estimates, one was $3,000....can I just use black spray paint?

@saadaljohani2002 Жыл бұрын

Hi Chris, thank you for the great tutorial. I got a door from the junkyard for my jeep grand cherokee with different color. So, The used door is in good shape. So do i need to sand the door to metal or just sand the clear coat then apply a 2k primer and paint it with the new color after that? I’ll be using 2k aerosol primer !

@GarageNoise Жыл бұрын

If it's in good condition you don't even need to primer it. Definitely don't need to take it to bare metal. Prepare the surface with 600 and base.

@shugg0517 Жыл бұрын

Hey Chris got a question for you I have a 1999 Accord 4 door sedan (black). Typiical honda paint faded on the hood , roof and trunk area (no clear at all ). As for the sides faded out clear from top of the doors r just past the bottom of the windows. The rest all the way to the bottom has clear. How would you attack this. ? After sanding would you do a "wet bed" on the entire care or seal it. Want the repaint the whole car back it's original color of black. Only minor door dents everything else is straight on the car. Thanks for all you do, Tony

@GarageNoise Жыл бұрын

I would seal the upper surfaces prep the side with 600 and repaint and clear. Appreciate the support

@joshmartin7622 Жыл бұрын

I really appreciate your content! Had a question, can you paint over sanded clear coat or does it all have to be removed down to the base coat before priming? Thanks in advance, I'm new to all this.

@GarageNoise Жыл бұрын

I knew this question was going to come up. After I had this video uploaded I realized I neglected to answer this. The answer is no, if the paint is in good condition it's best not to remove it. Surface scratches and imperfections can be repaired without stripping off the old paint. If the paint is cracked or deteriorating then you may want to strip it down. Appreciate the question and support!

@SomeGuyInSandy Жыл бұрын

@@GarageNoise Helpful, thanks :)

@cjcarpenter8366 Жыл бұрын

Are you using a 1.3 tip when you are spraying that upol primer as a surfacer (4, 1, 1)?

@cjcarpenter8366 Жыл бұрын

I should have read the other comments before asking. 😅

@GarageNoise Жыл бұрын

Yes

@ForwardMovingDesigns Жыл бұрын

I've been looking all over for the u-pol 2253 primer in the uk and it look like we don't have it available. I'm currently using the 2025 but would have liked to try out the 2253 for its added sealer and direct to metal capabilites. Any one from the uk know of any primers that does all this and is available in the uk.

@GarageNoise Жыл бұрын

You probably have Roberlo me1 in your are that's a 2k primer that can be used as a sealer as well you might look into it. Appreciate the support!

@ForwardMovingDesigns Жыл бұрын

@@GarageNoise thanks I'll take a look.

@setthehook4me Жыл бұрын

Do you dilute the isopropyl alcohol? Is it the 70, or 90%?

@GarageNoise Жыл бұрын

I Don't dilute it. It is 70%

@setthehook4me Жыл бұрын

@Garage Noise Thank you again for your time in posting and responding.

@SOUTHSIDESUPERSTAR Жыл бұрын

So 1.3 tip for the primer and 1.3 for the paint as well on the lvlp gun?

@GarageNoise Жыл бұрын

I used the 1.3 for both in this video. You might need to use a 1.4 if your using this prime at full strength 4:1 mix .appreciate the comment and support!

@SOUTHSIDESUPERSTAR Жыл бұрын

@@GarageNoise but the 1.3 is good for clear and paint

@GarageNoise Жыл бұрын

@@SOUTHSIDESUPERSTAR yes, that's what I use for the clear and paint. The 1.3

@tedc9306 Жыл бұрын

How much for ur labor on the Colorado door, to repair and paint? Not materials. Ty

@GarageNoise Жыл бұрын

About 3 hrs $180

@tedc9306 Жыл бұрын

U know ur the only one who shoots straight, I watch alot of utube but if I had to keep just one subscription it be u. Ty for ur input. Always

@Genshim5 Жыл бұрын

Master you mentioned that I can use the primer 2k as a seller , how can I do can you show this me please! I follow Garage Noise From Nicaragua. Thankful

@GarageNoise Жыл бұрын

Awesome! Appreciate the support! The mixing ratio is 4:1:2 primer, activator and urethane reducer. In this video I mix and use upol as a sealer.

@Genshim5 Жыл бұрын

@@GarageNoise thanks so much !

@Genshim5 Жыл бұрын

Not many painter can do this skills

@GarageNoise Жыл бұрын

@@Genshim5 👍

@robertjuniorr7074 Жыл бұрын

Do you study in another country?

@GarageNoise Жыл бұрын

No sir