How to prepare and paint a door - Using a Purdy roller and Dulux paint

Рет қаралды 88,117

Күн бұрын

In this video I show you one of the best ways to prepare and paint an internal door with a roller. There are a few ways in which you can do this, but this is just one of my favourite ways when the door has no grain or brush pattern to follow.
The paint and roller sleeve you use is entirely your choice, but here I'm using a Purdy mini jumbo roller with a White Dove sleeve for smooth surfaces, and applying Dulux Quick Dry Satin Wood
RECOMMENDED TOOLS
👉 Purdy Jumbo Mini Roller: amzn.to/3q1B9fj (Amazon)
👉 Purdy White Dove Sleeve: amzn.to/2MxxfNr (Amazon)
👉 Roller tray set: amzn.to/3q1XJ7x (Amazon)
👉 Paint stirrer: amzn.to/3ksU15K (Amazon)
👉 Cutting-in paint brush: amzn.to/2NNgqPd (Amazon)
👉 Dusting brush: amzn.to/3sxZdIi (Amazon)
👉 Primer/undercoat: amzn.to/3q4EZUV (Amazon)
👉 Dulux Satin Wood: amzn.to/3kwtT9X (Amazon)
All tools used can be found at my Amazon Store: www.amazon.co.uk/shop/justinb...
MAKE A SMALL DONATION - Help me continue to make interesting content
paypal.me/justinbailly?locale...
Thank you so much for your continuing support
CHECK ME OUT HERE:
Instagram: @jbpaintingdecoratingcarpentry
TikTok: @j.b.tv
Pinterest: @justinbailly74
Web: www.justinbailly.co.uk
CONTACT ME:
Email: justin.bailly74@gmail.com
I make a small commission on Amazon sales
#painting #doorpainting #fastpainting #decorating #homeimprovement

Пікірлер: 63

@gayjackson3634 3 ай бұрын

Justin thanks. I'm 75 & am now the only handy person & your video helps a lot as I can't take door off. It would be too hard.

@JBTV 3 ай бұрын

Bless you for this. It's so nice to know that my videos are helping people. Thank you so much. Hope you enjoy the videos.

@joecorfield 3 жыл бұрын

Thanks very much for the links and video mate, much appreciated. Currently trying to decorate my first house so I'm very new to all of this decorating lark! Your tips are absolutely priceless, thanks!

@Avital4414 2 жыл бұрын

Excellent. Super clear, thorough, helpful.

@caderkoodoruth7353 2 ай бұрын

Thanks, great tips. Very helpful

@renostubbs8504 Жыл бұрын

Excellent video mate

@gayjackson3634 3 ай бұрын

Luv it. Thanks

@janegardner3851 3 жыл бұрын

Perfect timing as I still have 2 doors to do in my hallway. Been putting it off for weeks lol. Great video as always :-)

@JBTV 3 жыл бұрын

Great! Thank you Jane

@pikricky 3 жыл бұрын

Nice one,looks a really good finish,thanks for the tip

@JBTV 3 жыл бұрын

Glad it was useful for you, I appreciate your comments 👍

@pikricky 3 жыл бұрын

@@JBTV Credit where credits due young man

@tommynguyen1973 Ай бұрын

Very good

@alihussein1783 Жыл бұрын

Thank you so much

@Czechbound 11 ай бұрын

Very clear ! I have "wood grain effect doors" which appear to be imprinted cardboard grain laid on the door facings. Any attempt to sand them is like tearing back this thin layer of cardboard. White spirit has done till now in erasing finger grease. But I guess for re-painting I'll have to use a primer and high opacity top coat ( just the one .. .)

@alexthomson7465 2 жыл бұрын

What à lovely job ! I am painting 2 that are matt grey, I sanded one door back to its original (old white) colour and am going to paint it with white satin. Could I have left the old matt on as an undercoat? Cheers

@jennifersherwood1901 3 жыл бұрын

Hi Justin , thanks for doing this door painting Vlog on your channel. I am in the process of doing my Living Room door up both sides . I have sanded and wiped it over to I really need to Prime the door as well before I paint it ? I am using the low odour Dulux Once white gloss paint on it . It is a plain big standard door with no panels in it. ????

@JBTV 3 жыл бұрын

Hi Jennifer, as long as there is no bare wood showing then it should be fine.

@Missmewithdat 6 ай бұрын

Perfect would you recommend a quick drying paint ??? Thank you

@zinnia1626 Жыл бұрын

Dear Justin, thank you for this great video and for your patient and clear voice throughout. I am unwell in bed but need to paint my doors as soon as I am able to as I painted all the property walls (beautifully!) this summer. When loading the brush, do you use plenty of paint or is less paint better? It is many years since I painted doors and I am not looking forward to the event at all.😕 All my doors are unpanelled so I assume I shall need to use a larger brush or roller. I have never used a roller brush before for any painting so it will be rather daunting. When I do feel well enough, and when I get the necessary tools together, I shall be checking your video often for advice. I have just thought of one more query. I have no idea whether the original gloss paint used was water or oil based. As long as I follow your instructions on sandpapering etc., will this in turn mean I can use a water-based gloss paint which is my preferred choice? Thank you.

@garywindsor5127 7 ай бұрын

Thanks. Great video. Out of interest do you use the roller again if so what’s the best way to clean it please?

@JBTV 7 ай бұрын

Thanks man. Yes I do, scrap as much paint as possible off the roller. Then wash with water, and a little green liquid 😉

@paulricketts2863 3 ай бұрын

first your sleeve is to fluffy for a door,6mm microfiber nook and cranny, second black polythene under door is the best sheet for painting door, crown is a resene brand in nz so i would not mix and match as to warrenty , leading edge is the term used for the door edge

@spinx1200 3 жыл бұрын

Good job JB. I use fat hog rollers for these jobs , leaves a great finish, holds a lot of paint too. 👍🏻👍🏻

@JBTV 3 жыл бұрын

Thanks Spinx, I'll check them out 👍

@spinx1200 3 жыл бұрын

@@JBTV youre welcome mate. 👍🏻👍🏻

@sofiarees6815 3 жыл бұрын

Loving your videos Justin! We're planning on painting our orange varnished oak veneer internal door this summer, would we use the same technique with a Zinsser 123 primer (2 x) first and then paint with top coat paint (2 x)?

@JBTV 3 жыл бұрын

Ah thanks Sofia, it's nice to hear people like them haha. Your suggestion seems spot on to me 👍

@davidclark618 Жыл бұрын

Out of interest how much would you charge for doing a door ? Thanks

@simontaylor2319 Жыл бұрын

Thanks, but how do you avoid the orange peel effecr, particularly noticeable on flush doors. Aren't you supposed to feather off using a thin, wide brush?

@andrewverran3498 Жыл бұрын

Or lay off with a 4mm mohair mini 100mm roller...works a treat.

@simontaylor2319 Жыл бұрын

where, pray, does one purchase such a roller in GB?. I recommend using a ProDec Advance Ice Fusion 100mm roller for flush doors, much finer than ordinary rollers & so finish is greatly improved

@snodge6770 3 жыл бұрын

Hi Justin, do you wipe surface down with a wet cloth, when using water based products? 👍👍👍

@JBTV 3 жыл бұрын

Not entirely necessary, but yes I usually wipe with a very slightly damp cloth after dusting

@geedub2019 20 күн бұрын

Was it lint feom the roller that you were picking off the door? If you remember, i realise this was years ago 😂

@JBTV 7 күн бұрын

😂 Yes probably

@jackwardley3626 3 жыл бұрын

try the fussy bloke rollers

@JBTV 3 жыл бұрын

I'll check them out 👍

@bsfbestshortfilmsonyoutube 3 ай бұрын

Hello. Could you please give me your best advice on choosing the most durable water based for my wooden framed windows? Using 80 grit sandpaper I spent hours & days hand sanding x 4 wooden sash window frames. I sanded off old layers of yellowed gloss leaving behind a thin layer of gloss which I can now see the wood grain through. I now have trust issues finding the most durable water based paints for my interior. I want to be 100% sure I am choosing the right paint system so I don't have to re-do all my efforts ? I am new to water based paints. So how would I go about this ? Do I need to prime ? uncoat ? Please tell me the most professional trustworthy durable pants recommended with the longest lasting effect ? Regards Micheal

@sanjaip 3 жыл бұрын

I notice you didn’t go back over rolled sections with a brush. Doesn’t this make the finish on the rolled sections look different to the parts of the door you cut in with the brush?

@Jesusandbible 2 жыл бұрын

If an indoor door has been gloss painted already, must a person use undercoat first to gloss it again?

@sr296-Tech-Creative Жыл бұрын

I'm painting contrator from india bro 😍

@silvereagle1352 2 жыл бұрын

What type of paint are you using here, please?

@JBTV 2 жыл бұрын

It's a water based Satinwood

@StephenSmith-vs8hr 3 жыл бұрын

What was the finish like.was it very orange peel

@JBTV 3 жыл бұрын

In the clip where it was dry, it was hard to see, but yes it's pretty flat, more flat than orange peel!

@StephenSmith-vs8hr 3 жыл бұрын

So u DON'T need to lay off with a brush .👍😁

@JBTV 3 жыл бұрын

@@StephenSmith-vs8hr The roller leaves the paint really flat, so it really depends on whether you want a slightly brushed finish..

@lyubomirangelov7128 Жыл бұрын

Is this roller not left fluff fibres on the door mate ?

@soothingsounds2650 Жыл бұрын

Do you need primer if pairing over oak doors ?

@JBTV Жыл бұрын

Yes you do 👍

@soothingsounds2650 Жыл бұрын

@@JBTV thank you for the response, can you recommend what paint is best to use satinwood or eggshell. Would the wood grains still show if it was to be painted rather than stained

@soothingsounds2650 Жыл бұрын

@@JBTV water based or oils based primer ?

@JBTV Жыл бұрын

@soothingsounds2650 personally, water based primer and water based top coat, and same goes with oil based. If it's indoors, I'd go for water based

@soothingsounds2650 Жыл бұрын

@@JBTV cheers mate, yes for internal doors, planning to use primer and then a satinwood finish paint for the top coat