I know!

Good stuff!

10 &1 is that 10 ounce s of spray wax 1 part water our the other way around

Agreed

Thanks! You as well!

How exciting... 🥵🥵🥵

Great question! So... Theoretically it would be a great idea. But it would take quite a bit of water to rinse off the soap and that could mean a lot of unnecessary product being used. You can just dry the vehicle with product on it but it can gum up your drying towel over time... I’ll experiment with your thought though!

Thanks!

Yes it can. I will say though the biggest benefit of this product is the spray and rinse application. That’s is kind of the secret to the sauce. If the N-914 can work like that then great. Since i don’t think it will, you’ll need to work quick. Doesn’t hurt to try!

So theoretically yes you can. Just remember that will probably change the foaming properties if you use a foam cannon or even just when filling your bucket. Also, although yes you might buy some time, it’s still only very little product. My thoughts are that it’ll probably do some good, just maybe not a whole lot! Worth a try! Thanks for watching the vids. Glad they could be useful! 💪💪💪

It’s the cheap Amazon one. I probably have more soap than normal that’s why

It might mask the hydrophobic properties temporarily but it shouldn’t hurt the flex wax

In this case yes you would need a paint prep beforehand... This all depends though on how much your charging divided by how long it takes

So the paint prep should be able to remove the drying aid not problem

In theory yes, this isn’t a very durable product but it all depends on the paint prep your using... Some are weaker than others

Awesome man! Thank you... So this product is not a very durable product. More of a maintenance product. With that as the case I’d do a panel wipe down with an IPA solution or panel wipe of choice. It should cut most of the Formula 4 away. Seal & Shine is not joke none the less and I’ve noticed how it bonds very well with little preparation. Thanks for the question!

@@mr.lad-detailingtricksntip awesome thanks for the response!

So it depends on your method of clay bar… if you like to foam the car down and use that as your lubricant, use F4 afterwards. If you use a spray lubricant on a dry vehicle, go ahead and dry using F4 before hand. The protection won’t be enough to get in the way. A good IPA or panel prep will pretty much remove any residue

Not sure where you made that up from but that isnt true at all.

Of course it will. But this stuff isn’t very strong, a good panel prep will remove it. You should be prepping the panel regardless anyway before a sealant

So yes and no. It won’t damage your coating, although you’d still be better off using a ceramic soap and leaf blower

Yes you can. Just make sure you use a panel prep before applying the wax/sealant

@@mr.lad-detailingtricksntip thank bro 👊🏻

A little protection. Nothing crazy, but gets the job done Wash to wash

Of course! Although I’d recommend a panel wipe before hand

Depends on what you mean by safe. Will it ruin it? No… but the product will mask the properties of the ceramic coating.

It’s the new ryobi mini pressure washer that has the extendable handle

@@mr.lad-detailingtricksntip is it the 1900 psi 1.2 or 2000 psi 1.2? I noticed they make 2 with the extendable handle. one that lays down and 1 that sits upright.

1900... It’s nice enough!

So I think that’s a bit of a stretch, although worth a try... If there’s not much soap on the car, sure give it a try. But if there’s still a substantial amount on the vehicle AS WELL AS the residue, I doubt the product will cut through... It’s worth a try though!

It can, although it wouldn’t work as effectively. You would need more product. I used to do that all the time with bead maker. I’ve switched since then

@@mr.lad-detailingtricksntip alright! Probably will be ordering formula 4 spray wax

Short answer: yes Long answer: of course ALTHOUGH there is a polymer film on top of the car from the F4SW... If your looking for a quick job, just go ahead and wax on top... If you are looking for longest lasting results, at the minimum do an IPA wipe down. I’ve used Seal & Shine on top of this and it still lasts forever. I’ve used other products on top and haven’t had the longest lasting results... OVERALL! always use do a panel wipe for better surface adherence. Best results always step from a light polish before hand which this product will not interfere with...

@@mr.lad-detailingtricksntip thanks for the speedy reply I was looking to get into the business of washing and detailing and was wanting good chemicals that's not going to break my pockets but perform good aswell any recommendations that you have

So I give reviews on many different chemicals on my channel but to break it down... 1) super clean degreaser 2) Meguiars gold class 3)turtle wax Ice Spray Wax 4) chemical guys VRP All of those are available at Walmart and you can literally start a business with just those chemicals and expand from there... Good luck!

My favorite

😆😆😆

Lol

Of course you can! Just remember that the formula 4 is a form of protection so that will effect the longevity

That would make sense!

Might as well!