How To Prime & Glue PVC Pipe like a Master Plumber

Рет қаралды 544,911

Күн бұрын

My Favorite Tool: amzn.to/3NIFJuO
Oatey Primer: amzn.to/2CZmFod
Oatey All Weather Glue: amzn.to/2BXiCff
Oatey Heave Duty Glue: amzn.to/2CZGzzo
This is a quick video about how to properly prime and glue PVC fittings.
0:00 - How To Prime & Glue PVC Intro
0:09 - Brand & Types
0:30 - How To Apply Purple Primer
2:45 - How To Apply PVC Glue
3:21 - Marry Pipes
4:15 - SUBSCRIBE!!!
Thanks for watching and subscribing! As an Amazon affiliate I earn from qualifying purchases. Thank you for your support!
Was this video helpful to you? Send a tip:www.paypal.me/bensahlstrom
Become a Patron: / bensahlstrom

Пікірлер: 426

@jericoboy1998 Жыл бұрын

Plumber here couple rounds with the primer couple rounds with the glue and prime the face of your pipe too looks better than most apprentices I’ve worked around and some plumbers but don’t over complicate it bud appreciate the simple video for beginners and 1/4 turn is fine don’t turn continuously or it may leak. Easy way to do that is use the lettering on the pipe as a guide insert into the hub with the letters facing 8 o’clock and turn them up to 12. Hold them in as they will push out sometimes. And keep making videos like this 👍🏼 everybody does things for the first time at some point in their life and videos like this may help I used this to explain something to my wife

@DiffEQ Жыл бұрын

Wow... expert advice on how to make a 1/4 turn. Fascinating. How come you didn't tell people that all the cement/solvent he put in the female side is now INSIDE the pipe?

@ArcConAK Жыл бұрын

@@DiffEQA retired old man engineer is commenting and talking sh** on multiple youtube comments......Riiiiiiiiiiiight.

@crystalblueocean Жыл бұрын

Well, depending on your location, some inspectors may require you to prime the entire pipe, I suppose. To be honest, the pipe actually looks really lovely when the whole thing is purple. Think about it, right? Purple pipes everywhere! Very sort of Willy Wonka-ish. Even though the pipe is now entirely purple, you may still have to put a lot more around the end, and go around with brush at least 247 times, long enough for the pipe to be visibly melting from the primer. Then, once fitted, it may have to be turned the same number of times, 247. In some locations, 248 turns may be the standard, that one extra turn making a big difference. I think the inspectors have a device that can determine the number of turns, so, whatever you do, don't skimp on the number of turns. I mean, is it really worth failing inspection because you couldn't be bothered to give that extra turn? Think about it guys. This whole process, of course, depends on many other factors, too, such as elevation, wind speed, air pressure, whether or not you're east or west of magnetic north, and, of course, you may have to do this on a day you don't eat any chicken or shellfish. Yeah, something like that. I learned all of this from a conversation I had with a gentleman on a train when I was travelling through captainkirkmanistan, back in the 80's. He was a Master plumber, if my memory isn't failing me. Or did he say he was a 'master drummer,' and I mistakenly heard 'plumber?' I don't know. Anyway, I hope this was helpful in some way :):):)

@covfefepatriot3218 Жыл бұрын

So you say we should prime the face of the pipe? And cement it too, or no need?

@jericoboy1998 Жыл бұрын

@@covfefepatriot3218 it depends on who’s observing the test but in Texas your best bet is to do both from my experience

@Hamimus 3 жыл бұрын

Truly the pillars of our society. KZfaq tutorials will forever have a place in my heart.

@jillianharrison3250 2 жыл бұрын

Shout out to everyone who watches a quick tutorial n fakes it till they make it 💪💪

@toznerd6369 3 жыл бұрын

Me on the jobsite: "I do at least 30 turns with the primer..." Boss: "You'll be doin' the last 28 in your truck on the way home,....you're fired!"

@jjcomparato5148 2 жыл бұрын

I needed a good laugh tonight, thank you

@michaelsherron7815 2 жыл бұрын

LOL! Ain't that the truth!

@anserafers8088 2 жыл бұрын

Hahahahahha 😂 too funny man 👏👏

@tazyboy28 2 жыл бұрын

Lmboooo

@petemiller519 2 жыл бұрын

No kidding....bang on...thanks for the laugh!

@Renaissance_cycles 3 жыл бұрын

All I needed to know without wasting my time! Appreciate ya man!

@SM-pi8vd 2 жыл бұрын

And money. I tried it and worked! Saved 1500 bucks!!!!!

@bobbobbington6650 4 жыл бұрын

you just helped me finish my rdwc system. now all thats left is growing the weed and getting high. thank you sir.

@stonedtroutbum3709 3 жыл бұрын

I'm here for my drip system..

@willg9620 2 ай бұрын

Hey man, I’m 48 years old here this is gonna be my first time. Thanks bud.!

@johndesjardins8404 3 жыл бұрын

Thank you Ben for the tips on how to prep and glue PVC pipe.

@laurencej498 4 жыл бұрын

By the way this is a great instruction video direct and to the point I wish I had watched your video first before I applied the two products.

@abousidi75 2 жыл бұрын

Great narration, simple and to the point. Thank you Sir.

@crestaterrell5925 3 жыл бұрын

Thank you for making this so clear. I just fixed my gravity feed water line. You can teach an old dog new tricks.

@markh.2899 5 жыл бұрын

Simple is good - just what I was looking for to be sure - thanks!

@jacobnichols982 3 жыл бұрын

Just some wholesome dad worthy material😂 much appreciated

@jesusmendez50 2 жыл бұрын

Thank you for sharing this information and knowledge. Straight to the point and extremely helpful for beginners.

@DiffEQ Жыл бұрын

Except it's wrong. Find my other comments if you want to know.

@thomasebben5876 2 жыл бұрын

Thanks very much for the training. Thanks to you I made a 5 port sprinkler manifold and saved a ton of $.

@nascarsimracing1 3 ай бұрын

Thank u!!! This helped soo much!!! I'm using 2 inch schedule 40 pvc pipe as the standpipe/blower pipe for one of my mini sirens, and i have to glue the t fitting to the pipe sections. This tutorial taught me everything i needed to know!!!

@downdogz 2 жыл бұрын

Clear, straight forward instruction. Thank you

@unclematt3 4 жыл бұрын

Thank you, Benjamin. Very helpful.

@Aepek 2 жыл бұрын

Nice vid, and your right, those inspectors REALLY like and want to see that primer, and no one wants to have to redo a pipe b/c if that; ESPECIALLY, when you have a very short stub out to begin with. Cheers✌🏻 (Was taught to prime pipe, fitting, pipe. Than solvent cement (aka glue 😉) fitting, pipe, fitting and then connect w/ 1/4 turn and hold for 10-15 secs so doesn’t back out.)

@8borboletas 4 жыл бұрын

Thank you! That was just it, I just needed a reminder. I always helped my dad as a kid but I always want to double check on small important things like this on my 1st time all by myself.

@anthonygerace338 2 жыл бұрын

Great concise video. All of the info I needed to perform the job

@BobKarnowski 3 жыл бұрын

Never had to do this before and your video was excellent and exactly what I needed. Thank You!

@DiffEQ Жыл бұрын

Or you just read the instructions. SMH BTW, he showed you the WRONG way to do this but you couldn't know that. Find my other comments if you want to know.

@mikebooz6390 2 жыл бұрын

Simple and effective! Great Job!

@thomaschetney990 14 күн бұрын

Great Job for us home owners to see how the Pro’s do it😃 Thank You Again

@alienprepper5918 Ай бұрын

Thanks for the quick and to the point instructions.

@melindamosley1599 Жыл бұрын

Yes it is simple but no one had shown me until now. It worked like a charm. Thanks.

@Kyle7K 2 жыл бұрын

Excellent demonstration and just like the inspectors need to see that purple, this is exactly what I needed to see.

@itsjmmariano Ай бұрын

This is amazing. Thank you for teaching us!

@justmeva 2 жыл бұрын

Great view: direct and to the point. Thank you.

@gordonchapman2752 7 ай бұрын

Probably the only real informative video I've found. Much appreciated!

@kynathanhodges2617 3 жыл бұрын

I'm making ballet barres with PVC pipe and as a not terribly craftwork-y person this is incredibly useful, thank you!

@GloriaLopez-th4nd 3 жыл бұрын

Thanks big brother you saved me lots of money due to Texas winter with snow!!

@treismac Жыл бұрын

I appreciate your no nonsense how-to!

@grampyper2111 Жыл бұрын

Thank you. Very helpful. Simple is appreciated.

@jwgmarine4314 2 жыл бұрын

Awesome thank you well done! Exactly the level of info needed.

@hankman1023 3 жыл бұрын

Thank you so much for the demonstration!

@rjmcgovs 3 жыл бұрын

Very good explanation. Great job.

@davidyoung2111 4 жыл бұрын

Hey think you so much. I've watched several of these and yours was WAY simpler and easy to understand. You mentioned ALOT of good pointers that NONE of the other videos said like about holding the pipe for a few min cuz it will push itself out etc. I'm on a 30 day leave from the Marines. I just got home from being stationed in Baghdad and my wife had more then a few things that needed to be fixed around the house. So I had to learn and fix everything fast before my next deployment. So think. Please keep making tutorial videos, Your really good at it.

@dereksmith5 3 жыл бұрын

Thank you for your Service, Sir! And may God Bless You and Your Family!🇺🇸🇺🇸🇺🇸

@darienredsox1878 3 жыл бұрын

Thank you for your service. God Bless.

@Swimming_cooking 2 жыл бұрын

Thank you so much! Fixing my pool pump, you helped a lot

@danalaniz7314 Жыл бұрын

Great demo and explanation. Thank you.

@rickhilton4362 19 күн бұрын

Exactly what i was looking for, was wandering if i needed to prime both sides.Thanks!

@asandi4444 Жыл бұрын

Very helpful and clear video -- thank you!

@ramchillarege1658 2 ай бұрын

Very well done video. Thanks.

@bordo3k 4 жыл бұрын

A shining example of an excellent DIY video! Thank you!

@DiffEQ Жыл бұрын

Except it's wrong. Find my other comments if you want to know.

@T34theAmericanheavy 3 жыл бұрын

Short, sweet, to the point.

@johniorio7951 Жыл бұрын

thanks so much, Ben...now this was the ultimate pipe gluing video of all time....covered everything, those other video with some big- time plumber were confusing.....

@fpaz3301 10 ай бұрын

Quick and easy. Great video

@nickd5401 2 жыл бұрын

Brilliant, exactly what I was looking for.

@varkadegames 7 ай бұрын

This video helped me repair my pvc pipes to my washer. Thank you. 👍😁✌️

@richardmarriott-smith9517 2 жыл бұрын

Very useful video. Thanks!

@lvteachme973 2 жыл бұрын

Perfect! Exactly how pro explained it to me.

@dennisjohnson8753 2 жыл бұрын

Good video - quick and to the point

@mansfieldification 3 жыл бұрын

Thanks for the video it sure was a big help!

@pctechusa0505 3 жыл бұрын

Great Video....simple with helpful details about the process :)

@harmburger 2 жыл бұрын

Bevel/chamfer those ends, seems to be a common thing inspector looks for. Agree that too much time spent with the primer allows it to dry out. I was always taught to cement the male and female both.

@guyrabinowitz 2 жыл бұрын

Great presentation, Ben!

@jessegrace1 3 жыл бұрын

Nicely done my man!

@teardread1899 Жыл бұрын

Perfect vid. Just what i needed. Thanks!

@coltonyoung7483 3 жыл бұрын

Super helpful! Thank you

@That_Stinger_GT5 2 жыл бұрын

Super helpful! Thank you!

@d4dolphinify 4 жыл бұрын

VERY helpful...thank you

@FloofyTanker 2 жыл бұрын

Thanks Benjamin! Good Job!

@loryburton4846 2 жыл бұрын

This was the perfect video to help me fix a drain pipe for under the kitchen sink.

@PaceTheKid 11 ай бұрын

Great video it really helped me with my pool fittings :)

@garyloger9416 Жыл бұрын

Thanks man. Exactly what I needed to know. Subscribed. 😁

@bretgreen5314 6 ай бұрын

Good lesson; thank you

@VOOODOOO37 3 жыл бұрын

great video, thanks

@aenimosity7 4 жыл бұрын

Thanks for the great video!

@noprivacyleft 4 жыл бұрын

short and to the point. Thanks

@jaredkyle5987 3 жыл бұрын

I. Heard it's good to sand the opening and pipe ends before prime and glue for better bonding?

@samuelhaile7296 Жыл бұрын

Great job

@FVWhimsy2010 3 жыл бұрын

Well, thank you...I just found out that I've not been using enough primer on my water lines around the farm. Now I know...and knowing is 1/2 the battle! GI Joe...and Benjamin! ;)

@dmartyair 2 жыл бұрын

Brother, I've been using pvc pipe for 30 yrs.. first I've heard of ""30 times" with the primer. Just circle around 3 or 4 times. Same with clue, then put it together with marks lined up.

@getdown1080p 2 жыл бұрын

Thanks for the video

@danpanderson 2 жыл бұрын

Thanks for sharing!

@slothypunk 2 жыл бұрын

Thank you, very informational

@junzhang8934 3 жыл бұрын

Right on spot, thanks buddy

@stacytufto505 2 жыл бұрын

Thank you just what I needed!

@eddiev9327 4 жыл бұрын

Great video.

@trudaroof 4 жыл бұрын

I bought Oatey medium orange cement (for CPVC) by mistake for my PVC sink drain. I used it, do I need to re-do it or do you think it will be OK?

@ivandavila4636 3 жыл бұрын

Thank you for being to the point.

@cbdyna Ай бұрын

Thanks a lot. I was told to prime both but glue just the pipe. Ill do both.

@mbirugotora Ай бұрын

Excellent video

@BenjaminSahlstrom Ай бұрын

Thank you very much!

@amatamat55 3 жыл бұрын

Thank you Benjamin really appreciate it.

@BenjaminSahlstrom 3 жыл бұрын

You are very welcome!

@teddyboy252 2 жыл бұрын

Good job

@redLeader1686 3 жыл бұрын

Zactly what I needed - thanks!

@bobsmith-ud9xi 2 жыл бұрын

Trust me short and sweetbis the way to go with these thanks for the video

@Joseph-di3zs 3 жыл бұрын

Great job Ben. You made it so simple that even I understood it.

@doveboyz857 2 жыл бұрын

Very helpful to thanks 👍

@coppingtonfarnham7731 4 жыл бұрын

Thanks I needed this. Had to research how to open a new Oatey can too. Turned the can over, tapped several times on a hard floor to unfreeze the lid.

@user-wx6oe9lx3b 3 жыл бұрын

Some channel locks always does the job.

@jc199159 Жыл бұрын

@@user-wx6oe9lx3b channel locks for the win. Or tap the perimeter of the lid with a butter knife, like a pickle jar.

@DontLookBehindYou1 2 ай бұрын

Yep... And if you use channel locks make sure to keep the locks towards the top of the lid... Anybody who's done this with channel locks knows exactly what I'm talking about and why