How to print in multiple colors in Bambu Studio

Рет қаралды 19,063

8 ай бұрын

In this tutorial, I show you the basics of Bambu Studio multicolor printing using the paint tools.
🔥 My 3D Printing Recommendations 🔥
Polymaker PLA PRO: amzn.to/3sx5j0V
Bambu Lab 3D Printers: bambulab.com
Eiobos Filament Dryer: amzn.to/3R0H70T
►MY GEAR:
Sony A7IV: amzn.to/3Kyt3IV
Sony FE 20mm f/1.8 G: geni.us/A6s4At
Rode PodMic: amzn.to/45Trr41
Sony ZV-1: geni.us/vISMwC
10,000mAh External Battery Pack: amzn.to/3YUlNw6
#bambustudio #bambulab #3dprinting

Пікірлер: 37

@bero2 3 ай бұрын

Thanks for the useful tutorial! You opened a whole new world for me!

@lesliemoore1462 25 күн бұрын

I have gone through multiple tutorials, and yours saved me! Such an easy tutorial to follow.

@leechomatic2002 6 ай бұрын

Thank you so much this was very helpful. Just bought my first 3D printer A1 mini and loving it.

@royalrevue23 7 ай бұрын

Finally a good toturial that explain it really good .. thank you sir

@oldpins 12 күн бұрын

Have just purchased a Bambu Lab X1-C with AMS. This tutorial explains the multiple colour processes extremely well. Thank you.

@Shayway 12 күн бұрын

Glad it helped! Enjoy your printer!

@jaimyyelvingtonmusic 2 ай бұрын

Super helpful video thank you!

@mrmoeezali 3 ай бұрын

Thanks man really helpful!

@syarifyahya 3 ай бұрын

You saved my day..thanks man

@annansu 5 ай бұрын

U teaching so clear to understand for me. 🎉

@romanpower3 7 ай бұрын

Thank you so much!

@Make_Bands 6 ай бұрын

Great vid man !

@Shayway 6 ай бұрын

Thank you!

@BigCrafter 2 ай бұрын

thanks young lad

@LookMomNoHands 3 ай бұрын

@shayway at 5:26 you said you could get the number of changes down if you tinkered with it. Can you explain that please? I'm having an issue where even though I didn't paint a layer white it is printing it. Kinda like those White lines you have going up on your model

@rmob8725 8 ай бұрын

Thank you for this man.

@Shayway 8 ай бұрын

🙌🙌🙌

@asv4k8 3 ай бұрын

Can you link the coaster and explain how to do multiple colors on the same layer, all i see are multiple colors on raised sections...

@maximgamerboy8216 4 ай бұрын

How do you get it smooth and plat with the surface

@northeastcorals 3 ай бұрын

1 layer of white on top of red, would the red would show through the single white layer? I always print a good few layers of white over another colour or I find that the colour bellow will show through it.

@grego2818 3 ай бұрын

Hi, you say it has to do 9 filament changes when printing the red top layer. How come since it is all one layer? Does it print some red layer in between the white layers or do you mean it does one complete letter before moving onto the next letter? ie not a complete layer at a time? Great video as it easily explains how i could do this without hauling out my white paint and brush! :)

@johndoughty4514 5 ай бұрын

Hi Shayway, thank you for the excellent tutorial, do you have a video where the multi colors are flat like the coaster you showed at the beginning by chance?

@Shayway 5 ай бұрын

I don't have one but there are a few ways to achieve this. The coaster model in particular used separate objects in order to do the painting in Bambu Studio. I can definitely look into making a video covers these methods

@yeetasaurusrex1682 7 ай бұрын

Hwat else hwill you paint hwite?

@marcoshernandezcuestas9222 27 күн бұрын

Hi, its possible add text other color ?

@danclear3121 2 ай бұрын

So I did this and my bambu still prints it in one color, any idea why?

@TerminalOingoBoingo 2 ай бұрын

One question: can you save your sliced model with the multi color if you wanted to print it multiple times?

@osvch 6 ай бұрын

What you have showed is all but not what you printed at the beginning of video. You sliced colors by layer, but you where showing print with multicolor layer.

@gmcoils 7 ай бұрын

can you make a video how to add custom logo or qr code to a print from the bambu stufio?

@Shayway 7 ай бұрын

This is a cool idea, I'll definitely see if I can put something together!

@facelessfan 4 ай бұрын

Why would you need 9 changes if only printing top layer white... shouldn't only be 1 change? bottom is all red then top changes to white...

@RedERscrubs 22 күн бұрын

Late to the party, but I really appreciate the tutorial! Thank you! Question: did you say that you can use more than one AMS to achieve more colors? (Example: if I had two AMS’s, I could produce a print with EIGHT colors?) would that be using only ONE mini? How would this work? Anyone?

@Shayway 22 күн бұрын

Yes you can! wiki.bambulab.com/en/x1/manual/Connect-AMS-Hub-and-multi-AMS

@RedERscrubs 21 күн бұрын

@@Shayway Thanks so much!!!

@marliesplays 5 ай бұрын

Is there a way to do this if one does not have the AMS?

@Shayway 5 ай бұрын

You could use the "Pause at filament height" code to manually change the filament. Tons of videos on this but I haven't made one :(

@marliesplays 5 ай бұрын

thank you, already found that out - unfortunately one seems to be able to do only 2 colors with prints 🥲 but maybe im not fully informed. @@Shayway would be cool if you could make a video on this nonetheless!