The level of detail in your videos is spot on!!! It makes it looks really easy! Best channel for Van conversions. :)

Interesting video that happened to be recommended by KZfaq. One thing I noticed about the bigger clips was I needed to run a 10mm drill bit through the holes in the metal body. You made this look so easy and I like the tip about spray paint to mark the holes for the clips.

You have no idea how helpful these videos are - thank you so much.

Your channel is amazing ! Just bout a t5.1 shuttle going to fit a leisure battery and still deciding to take rear interior out and carpet a line it with a headliner etc your channel is going to be my bible 🙏

Thanks for the help the other day still in limbo with the kitchen unit for now however carpet went well good to speak on the phone , fridge now gone ha ha .

It's like art attack for campers!

What a brilliant video 😀 If only I had your skills 🤔 If I ever do summon up enough courage to do this there can be no better video to refer to 😍. Thanks for posting.

What about putting a headliner in a van which did not have any factory fittings or trim?

Really useful thanks! Got the Custom Shop Designs roof liner for my Vito and it's all you say it is, except not a single instruction on how to fit it & my Vito came with no liner, so nothing to go by.

I don’t like I love it . Brilliant video and thank you for sharing supplier details as that is the hardest part finding where to get everything. True pro thanks 👍👍

Thankyou for sharing your knowledge

Thanks for sharing all your knowledge and skills

Great vid cheers but any chance you could provide more detail on how to connect and wire up the lights?

My Vito didn't come with a headlining, it is just the bare metal roof. Whats the easiest way to make up a template for the plywood headlining boards? Great video by the way!

Well done 👍 Enjoyed every bit of this Tutorial thank you .

Great video, easy to follow, understand, an excellent tutorial. Look forward to more of them...

Another great video, on the subject of headliners could you do a video on recovering and modifying a pop top headliner adding lights etc? Thanks

I got fed up with the joining strip popping down so ended up screwing through them! I also found the clips plastic receptacles rattle like mad

cheers for the vid! should definitely show the wiring process if you do it yourself!

Just wondered how thick the headliner board that you have put in is? Great videos by the way, really helpful for the newbie DIYer

Hi, great video again. I'm learning so much to work on my T4. My roof panels are bowing down so want to re-attach them. How do you mark up the clip holes if the panels are held in with little screws at the moment?

great vid - burrs on wood? not having a pop, just had a little giggle to myself buddy. keep up the good work, your obviously use to working with metal and not wood.

Good way to lose an eye drilling out those clips. Please be safe so you can more great videos.

Hey guys, great video as always! Couple of questions... - why didn’t you put the middle trim clip up (between the two roof panels)? - I’ve got my stuff from the exact same places :)! Should I carpet the panels, put the lights in and then put them up? Or do you guys just carpet over the entire roof in situ? Cheers

top job as each time , a pleasure listening to you ! regards from CH

I am from Switzerland and I wanted to by the trim clip used in This video. However, the Harrison shop does not deliver outside UK. Is there an alternatives to get these rivet ?

Lol you cocked up the front headliner didn't you! 😂 spotted it when you were banging on about marking holes with spray paint. That's why front trim wasn't covering and why you mysteriously ended the vid saying it's not quite finished (gap between panels was too tight to fit centre trim!). Best just to own up imo 😂

Have you got a link from where your buying the replacement trim clips. Thanks

Hi, can you tell me how long these longer clips are you are using? Thank you

very cool very helpful

Have you done any work on a Subaru Sambar before? We are really struggling with fitting a new headliner! Love the videos xx

Hi there have been getting some very good tips from your videos which I’m using on my own VW Caddy. One question tho the clips you are using on the factory fitted grey strips where do you get them from? Thanks again for the great videos

I mean amazing video as usual but holy shit. A Christmas tree bit I have never seen that before but what a sick tool.

Hi. I have an old T4 which i wanna do the roof lining in but have realized today that i have a sun roof. How do i get around this please.

We are about to convert our Vauxhall Vivaro LWB 2014 > Do you know if the VW CNC Headliner kit will fit this vehicle? Templating the headliner is the thing that fills me with dread.

I’ve got the factory fitted roof liner in mint condition are they suit to use for a camper or is ply better? I’d be finish it in carpet M thanks

All that measuring between the lights and you didn't leave a gap between the pieces of ply where the roof bar is. Th distances will be wrong when you fit the panels. Also why is the front panel not long enough? It should tuck under that OEM Strip. Some good tips in the video.

Hi, love your videos so much Combe Valley Campers 💗 One question, the LED light that can be directly screwed onto the headliner, what are they called?

Another fantastic video thanks

Hey man. What would the other method of fitting headliners be? Thanks! Great videos!

Do you carpet over the clips in the roof so they are hidden or would you have to use a different type of clip if you want them hidden?

What tools did you need to fish out the cables for the LED downlights once set in the ceiling lining ?

There is no trouble having the downlighers touching the carpet then? Thought this might be a little dangerous as they can heat up quite a lot..?

How would you finish off the join between the front cab and the new rear carpeted headliner, if you dont have that nice trim threshold? For a different van to one you showed, which recently had the bulkhead removed. I have looked online for a company that makes custom ones but cant find any. Cheers guys 👍🏼

Very useful information, many thanks

Great video, very useful. What thickness ply do you go for?

Great video. Is the principle the same for a T4?

Do you spray-glue the reflectix to the roof?

What is the link for the Harrison trim clips (the white ones for the strip)?

What is the reason for not being able to carpet the original lining boards?

Hi there. My T4 has a sun roof in it and i want to change the roof lining as it's a total mess (as is the rest of it's interior) The company you recommended don't do cut out's for t4's with sunroofs so what would you recommend? Many thanks. Ivan.

A friend said to me he put veltrim over the existing carpet on his van roof headboard?? whats your opinion please anyone.

Do small vans like this not need any ventilation in the roof?

I going to have a bash myself! This video was great thank you :-D

How thick is the roof ply please? Edit, Ah, 3.6mm as mentioned in the vid!

Great vid, do you have a link for the flush mount led lights please?

Do you offer a service to fit a starlight roof in my roller team motor home?

I've just found your vids in research to do my Vito. I've found head liner boards in 3.6 and 6mm. I see you used 3.6.......... I was going to order the 6mm as it's only £5.00 more. Would I be better with 3.6mm. Many thanks for all your vids

Is the original head-lining not good enough to be carpeted and re-fitted ?

Great vids, could you do a bespoke van roof one starting from scratch please?

Hi What thickness board do you use for the roof liner? Great videos by the way.

I though you need to cover all metal with insulation/vapour barrier? Sorry just bought van new to the game

Would you take it back down to carpet or carpet it while its on the roof? Cheers

Great video, are you doing one on carpeting the roof?

will Harrisons hidden clips be strong enough to hold up 3mm ply roof panels?

Great tutorial as always :)

Is that an E150 next to the VW ? :)

what trim tools do you use/recommend?

where can I buy these clips in Melbourne, Australia? Anyone know?

Great videos! I’m going a new ply roof and covering with a foam backed swede, would you cover in place or remove the ply and cover ? Many thanks dean

need to get some safety googles when drilling etc........

Hi where is the best place to buy the recessed led down lights?

Is it this easy to do a T4 headliner too.

Hi, where can I get the insert type led lights from? cheers P

why use wood {heavy material } when there is much liter material avail .....and much more durable and cost effective

Please make a video on the next step of carpeting the roof id love to see how you do it...

A viewer warning before the screaching feme next time please - had headphones on...

Is it christmas already??..... oh no wait it the christmas tree bit ho ho ho

Was expecting to see how it’s actually made, not ordered from another company.

top banana

No one will notice clip orientation when it’s carpeted 🤷🏼

And it should be called a festive tree bit u cant say christmas anymore

700mm from here to here .... can’t see mate 😂😂

Great videos, BUT soooo long. Get on with dude !

Always cringe when people refer to themselves as professionals....

Super useful video. Quick question, is there any way to remove the headliner strip clips without breaking them once you've fitted them?

Where can I find the trim clips that you are using other than Harrison, since they can't deliver to france. Thanks