Remember when fuel pumps just required a signal wire, and a ground connection? They were good for the life of the vehicle. You didn't need a module or programming tools, either.

I'm not sure how others feel, but I really like seeing videos like this from you. I don't come across too many GMs that need modules programmed, so in a way watching this keeps the cobwebs cleared out of my head. Good idea on running multiple partitions. I personally have a few different cheap laptops that I use depending on the manufacturer. I should just get a nice fast laptop and put a bigger drive so I can run several partitions.

Today’s vehcls are not intended for average DIY mech. I write test scripts at my company to 100% evaluate/repair Reman-Chrysler ECMs. Tech-Authority makes the upgraded software calibration available for a one time fee per VIN as well (2011 & beynd). Been reverse engineering ECMS last 29yrs - still can’t get used to having to pay Chry (others) for correcting their own software. It’s like Apple charging users for upgraded IOS. Gr8 Vid👍🏿!

Hello Eric. I just recently found you on you tube, (recently retired shop owner, truck and auto repair, mostly fleet work) I have to say I enjoy your videos and your diagnostic skills immensely. Then I looked at one today when you quit, selling off your tools etc. Then I saw it was over 2 years ago, so I have to think you have got back on your feet again as I now see more recent videos from a month or two ago. I am happy to see that and wish you more success for the future, keep those videos comimg Eric. Great job!

It's amazing how much time is spent waiting for a computer to do it's thing. One hour later, the 15 minute job is done... Another good video, and you kept your legs!

Totally leaves diy in the rear view mirror. Whole new world.

While this may be just regular work to you, there is a bunch of information about things that can happen when trying to get setup to do a reprogram. Nice work and thank you. I personally would like to see more programming on different manufacturers.

This is an awesome video, thank you for making it. There’s definitely a lack of training when it comes to programming vehicles. It would be awesome if you can make a video for each of the big 3, GM, Ford and Chrysler.

It's true things are changing fast and becoming obsolete in no time. Great video.

Great video, Eric. I like these programming types of videos. You explain how do deal with tricky programming scenarios, like not using the shortcut on the Windows desktop versus accessing the app through the web browser itself. Rock on, good sir! And much prosperity to you!

Never heard of programming a fuel pump control module. All chryslers seem to be simple replacement. Love watching your videos. Please do more lab scope driviability videos

Just watched your fuel pump module programing. What I learned from it is that the Chevy dealer screwed me big time on the module replacement and programing to a tune of $831.+ , plus towing of $101. Not a happy camper. Thanks for the knowledge you presented with your video.

This is really helpful, I threw a pump and control module at my 07 and it did the same thing you showed before you plugged in the computer, I will have to let the shop know monday that I'm having look at it after throwing parts at it and not working but the codes are cleared

A lot of steps, jumping through hoops. I've done a few Fords before there were "clean power" for programming chargers, so my JNC660 was used to maintain battery power and I had it's charger plugged in so I wouldn't lose battery power. That all worked. You need an inverter, a clean power charger and two good batteries. Good video Eric!

Nice video Eric. You're not giving yourself enough credit. These modern cars are crazy complicated and not everyone can do what pros like you do. Thanks for sharing.👍👍

Great job as always Eric, great content. I felt a little nervous for you, downloading programming files using your phone's hotspot for the internet connection.

great video. Heard that Tessla can update itself alone from the internet. Hope it will be the next trend for GM and ford too :)

Im preparing to do my own camaro 2ss fuel model. Great video!

Great video, thank you. Even if someone does not do programing it is important to know what is involved. Ahora la pregunta mas importante, quanto cobraste? LOL

Great info as usual, Thanks for sharing Bro, Stay Safe👍

Órale amigo muy bien gracias otra vez me han ayudado mucho tus Videos no sabía que hablabas español ahí escuché que hablaste español👀🌿

You the boss and you know I'm 1 of you hungry subscriber, Love your videos and today i need a quick guide from you. I just brought a new Maxisys ms909 but I'm more locksmith person. I now need to add gm immo part to my j2534 if you. Specially for newer GMs. Guide me what software i can install please.

2013 tahoe PPV, originally came without a tow hitch, I installed a tow hitch. If I purchase one with trailer brake control, would that work too or do I have to get one without integrated trailer brake?

Great video Eric! Tienes cambio de $100 🤣

Awesome job

This is why i hate new vehicles. Everything requires "programming". Actually the only reason it exist is so you cant do repairs by yourself. And also so you have to buy expensive scanners and reprogrammers. Its bs

Thanks for sharing Eric. Nice to see one performed by yourself. Nicely explained. Will J-2534/maxi elite work with a Honda subscription? Stay safe and well buddy Artie 👍

It does we just like watching you

Thanks so much for this video...I bought a 2014 Savana 2500 that has power door locks but didn't come from the factory with RKE. I'm going to try and program the RCDLR and see if will work. Might have to program the BCM as well, not sure.

Will a bad module cause intermittent gas gauge to go out and cause cam bus communication codes 2018 Chevy Silverado 1500

Buen video me auyudo hacerlo nunca habia programado UN gm

Great video Eric thanks for sharing.

Great work amigo

Hello could you tell me we’re I can buy this Autel your using i keep trying to buy it but suppliers tell me I can’t use it on a laptop thanks great video we need more

Are there any requirements I should pay attention to when selecting a laptop to use...as in operating system, ram...etc.

Thank you for all your hard work and help. I enjoy your case studies and have learned quite a bit. Is it possible to program this module with the launch x431 V Pro?

Excellent video. 👍👍

Thanks for making this.

Great video buddy tfs

Hi, excellent video ,. How much to charge, for the programming only,.? Thank you in advance..

Hopefully this answers why programming processes are not readily within the capability of all DIY'ers.

Only thing that got me was the partitioned hard drive for different programs and where you get programs for ford and dodge and do they cost the same as chevy?

the J box you noted should work with manufacture and years?

a dumb question here, but all you need to reprogram a module is the j2534 pass thru and a laptop right? you dont need the autel scanner? i have a autel mp808.

Great video Eric. Wondering about your PC partitioning. Did you have to have an OS on each partition, or did you just create spaces where the different mfg software was loaded. Trying to set this up, and want to make sure I give enough space to each partition if I need to load OS in each one. Thanks in advance for your help and your sharing info.

Thank you Eric!

Can you use any windows laptop or do you still need to use an older version of adobe and stuff like that

What type of laptop should I buy for programming? Please be specific. Thanks

Great job

I've got a maxisys ultra that came with the big 4 channel j2534 box, but it isn't recognized by techline connect software. Why?

So on all vehicles if u replace the module it still has to be vin programmed?

The same tools works to program volkwagen jetta?

Thank you for this video

Thanks for the video

Good video, I have a question on a 14 malibu with shutter grill problem and I replace chasis control module with a used one and now I can command but now I have a code U0109. Car runs and all good except for that code. Does it needs programing and can it be done with a used module?

Good day, I have replaced and reprogrammed the new module for the Camaro 2018, But then next day i got a code again ( P069E - iso / sae reserved ) Any idea how to solve that brother ?

Is there any chance you’re located in Georgia?

Good video man!!! Hey i want to see if you can help me out. I ave a 09 chevy tahoe the fuel pump madual got wet and I replaced it they programed the modual but still getting codes any idea thanks.

Hi. How much you charge for programming?

Show some Chrysler program and I would love to see that

Good job

Nice video brother 👍

I also have a 2009 1500 Silverado with the same issue. It runs fine but it has check engine light on. After getting it scanned at AutoZone they said they can sell me a preprogrammed module that all I have to do is change it out with the old one and i'm good to go. Please give me your thoughts on this. Thank you.

So if it runs it doesn't need programming?? Because changed the one on my 2013 chevy malibu???

Seems kind of ridiculous to me to have to program something like a fuel control module in the first place. Guess GM/Ford/ChryslerFiat need the money!

I love your programming videos Eric. Any recommendation on a 4 channel J-box? Cannot wait for your next video. Thanks for sharing!!!

Terrific job and explanation. Thank you.

👍🏻

Why do we need a stupid fuel pump module? Whats the purpose? I wish i could rip that stupid GM module out. They design it that way so can rip us off,people.

How do you put battery power to the modules if ac or TCM stopped working after the program, with the same j2534?

yep the fuel pump works great on my 1994 ram 2500 and doesn't ever have to be programmed new vehicles don not need all this crap just a money pit

Awesome

Dear Mr. Erik, following my comment below, please try if you can along with many elite service or repair shops to convey a message to your Auto Mechanic's syndicate or authority so as to communicate your collective request (nation wide if possible) to GM , Ford, Chrysler... etc, to eliminate the inflating matrix of complexities and binding policies, supporting your claims with this example and others. It all starts up with an emission control and this is what it should be narrowed down to Only. Take Care.

Can you tell me what the gm program is and where and how to get it?

Great great video as usually what do you use to program Asian and European cars …

I neeed to reprogram the cadillac escalade fuel pump 2021 control module which they gave a recall but im in vietnam, any chance u can do it online ?

how did you know you had to reprogram the module. was it not. getting gas?

The Land Rover Fuel Pump Control Module is just Plug & Play. No programming required.

How much to program a 2013 Cadillac ATS?

Another great video, im actualy not seeing the option to choose maxiflash? Any thoughts ?

Dam man I wish you could of been in south Jersey

is that the same software to program a rcdlr module? or can a scan tool do that ?

the amount of dinging can be decoded the dinging you heard is the computer and ECM and the fuel pump controller say I'm hear I'm going into programing mode downloading data config and now I'm done

👑

Dear Sir, Many Thanks for your very lovely and informative videos. In my opinion such a fuel module should not be invented in the first place and if it is, then it should be a plug and play rather than being programmed in this complex manner hopping from download to download taking way more time than installing that module which makes it looks like an organ transplant adaptation (God Forbid), and the funny part is that you should play your game in the service provider's club yard to ensure that you are not using a counterfeit or cracked software. This is one type of control and manipulation on a small scale rather than technology which in this case many would call it a non-reliable technology, and its obvious that not too many in the field knows about. Japanese and Koreans I believe do not allow for such a tricky path, and what infuriates me a lot is that all this puzzling gizmos is made on a commoners cars, i.e. we would understand such policy if being made on Top end cars like Rolls Royce, Ferrari.... etc, but not on common cars used by ordinary people. Take Care & Enjoy Your Heaven.

Sir, how much does it cost if I send you the module to program it? Or it's best that I just bring the module to gmc dealer to reprogram, since I do the installation myself. Does the module to have to be installed to program?

I want to learn about programming. I would love to learn more from you.. What window laptop you use?

Hello dear, I am from Iraq, I have a Tahoe car 2008. I have a problem. I start my car, and after driving it for 2 minutes, it turns off suddenly. I checked the fuel pump. There is no signal in the wire. Is the problem in the control fuel pump or not?

the reason you lost internet on your iPhone it was on someone slse's wifi channel so it had to change the channel also that's a sign that you need to update your wifi driver on your laptop as well I'm a I.T guy when I see wifi drop its either do to a wifi driver not correct or outdated and the iPhone not updated make sure you check for updates on the iPhone weekly you should be at iOS 15.3.1 at this time also the iPhone should always be restarted right before you use the wifi hotspot section for reliable connection plus turn off IPV6 on the laptop by going into the wifi adapter settings and unchecking the IPV6 box it being on will cause a drop the iPhones only use ipv4 as a hotspot connection

Can I send my used module out to get reprogrammed or is the vehicle necessary??

great

“Oiga no tiene cambio por un cien” 😂😂😂

👍👍👍

How much do you charge for this?

👍👍

Hi , what’s the average cost of this job ? Thanks

Hola, me llamo Sergio, podría recomendar una laptop para programar GM , le agradezco de antemano gracias

Grasias

Watching this video after a whole year lol. How costly is this investment to take for all different vehicles?

Where are you located?