Best simplistic video tutorial ever. Thank you

This work perfect on my 2004 Jeep Grand Cherokee with a Linear garage door opener.... thank you for the video

Thank you so much - I didn't even read my manual your tutorial was awesome!

Worked like a charm. Literally took less than 30 seconds. Thanks

Thank you so much for this video. It worked on the first try after following these steps.

That was awesome!!! It took less than 30 seconds and I’ve been dreading the process 🎉

Thank you! These steps worked for my Toyota Highlander. 💃🏼💃🏼💃🏼

Thanks for the one minute tutorial bro

Thanks, worked like a charm on my H2 Hummer. Set up garage doors in two separate locations, awesome!

Thank you very much for this Easter present. It worked on my 2005 GMC Yukon XL Denali. I've tried others' directions without success. Your video instructions were clear and easy to follow. The opener in my 2005 GMC Yukon XL Denali now works. You are appreciated.

Ty my 1975 Lincoln towncar worked like a charm 😊😊

Thanks for keeping it concise . Worked perfect for me. Cheers.

Thanks! Worked like a charm! I didn’t even need my owners manual, just this tutorial

This worked really good for my 2016 lexus nx thanks

Thanks, King. Worked on my 2014 Toyota Camry

Thank you very much. Followed your directions and worked 1st time.

This worked perfectly for my Lexus IS 250! Thank you!

This tutorial actually helped. Thank you!

Thanks Worked perfect 1st time. Great directions

Worked for my 2015 mustang EcoBoost although I had to use the main button on the garage opener itself then I held down the middle button for 5 seconds with the car running then I let go of the middle button for 2 seconds then pressed down a second time for about 5 seconds again when the door started to come down. Then i pressed it again and it opened up.. so glad it's so much easier than fumbling around with that garage control.

Worked on my 2004 Cadillac Escalade and 2015 Chevy Malibu

Can you program a garage door opener without a garage door button and just the learn button and the car button

Nice video straight to the point. Thx

Sweet! Worked on my Chrysler Pacifica

Thanks it worked on my doudge journey

Information works perfectly!!!

This worked great for my 2022 Bentley Continental and my 2025 Maserati GT and my 2021 Land Rover Range Rover...

Awesome dude it works! Your video is the only one that worked for me 😂😂

This video rocked my boat!!! Thank you

Thank you so much, it worked on my 2006 Nissan Titan

Worked!!! Thank you 😊

Great tutorial. It worked with my Subaru ascent.

Thanks buddy you helped me figure this out I really appreciate y'all

No comments yet. People must not have any problems!

Awesome done in 10 seconds thanks

So... my garage home base doesn’t seem to have any sort of buttons in it. I looked in all sides. I have a Lincoln mkx, with the built in buttons. I tried following the instructions exactly and the lights did exactly what you’d say they would... the started blinking slow then fast. But it still won’t pair. I did it about 10 times with the same results and even tried a different one of the 3 buttons in my car.

Thanks this worked on my lambo Uris

Worked like a charm

Great video. This worked for me.

I cant get my homelink to learn the garage door remote frequency... it never blinks fast

This did not work with our 2017 Yukon Denali. We do not have a remote for the garage opener.

Thank you!

Thanks!! It worked for me!

Thanks! Worked for me ☺️

Hello, I tried pairing my garage door opener both ways and it's still not working. Please help. thanks.

Thank you. I was able to program two cars in 10 minutes!

Thanks dude

Worked on my 2017 santa fe thank you

I dont have a remote for my garage an trying 2 pair with opener

Question - All the videos say hold the two outter buttons to clear - Your two outter buttons are not the one with the Home sign....My two outter buttons are one with the home sign ands one without. Any clarification on that?

This worked thank you

I don't get fast blinking when i try to pair the remote with the car (2016 Tahoe)

the light under the home symbol thing in the car lights up red for me

Works for my 2017 mustang gt and 17 Jeep Cherokee 👍🏼👍🏼

Thanks 05 chevy tahoe works 1st try 😎

For me still not working :( Lincoln Navigator 2010 and Hörmann ProLift. I tried both ways but didnt flash fast. Thanks for helping

Thank you.

I have an 1999 Yukon Denali and I do not have the remote to my garage door opener. Can I still do the learn button?

Thanks for this video, it worked on my 99 suburban, and my 04 Camry

I can program all three of my cars to open one Genie garage door. Unfortunately when I program one car, it forces the other two cars to lose their connection. So in effect, I can only have one car programed at a time. This is so inconvenient.

How do I pair it without a remote?

It did work well But when I try to program another remote for a different door it seems to erase the first one I did

It worked on my 2015 bmw 2 series

My key pad stopped working. How do I program the car garage door opener and keeping the key pad enabled?

What if you don’t already have a remote can you still do it without it

Does it matter which button you press on the remote?

I have a 2014 Buick Enclave that I’m having trouble programming. I’ve pressed LEARN on my Chamberlain Whisper Opener and tried multiple times to get the Buick Universal button to work. I’ve programed successfully two remotes. Help?

What if the Craftsman Garage Door Remote is lost or no longer working? 2008 Mercury Grand Marquis... I programmed my previous vehicle without the remote, but I am unable to perform same on this one (2003 Homelink vs. 2008 Homelink) Do you have any advice or guidance? Thanks!!

What if you don’t know where your garage door opener is can I do it with out the original opener

Works good for my Audi R8

worked on 2016 GMC Yukon

cannot get my garage paired with my new car have tried now 15 times will do it again hopefully will get it

I have a 1997 Jaguar XK8. I did everything as you said and it still did not work. I held it down the 1st and 3rd button. It did what you said. I held the garage door opener up to it like you said. It did the blinking. Push the button and did not work. I repeated 4 or 5 times and still did not work. The Garage door is a Genie. Does that matter?

Worked on my 2006 Acura TL ( which is essentially an Accord ) but unfortunately not on my 2001 Honda Odyssey. I lost my owner's manuals that is why I have to look online for setting up the garage opener. It is kind of weird since both came from the same company.

No matter what I do my light won’t blink fast, and the selected button will not open my garage.

I have followed your directions, and I appreciate the video but it’s not working for my car. The directions in the owners manual or slightly different and I tried them also but still no luck. I have a 2010 Buick Lucerne and I have a new Chamberlain C2212T opener. I’m starting to think it is not compatible. Is there anywhere I can find a list know for sure? And any other ideas on what to try? Thanks

It just flashes green quickly now no matter which button I press. I first reset pressing the 1st and 3rd buttons. 2019 Crosstrek

Mine is not working and neither is it turning orange right away when I press the two buttons. Is it possible that I have a short somewhere or maybe I need to replace the fuse? It never turns orange at all no matter what buttons I press.

I am unable to get my opener in the Jeep to flash rapidly

Hey, great video but for some reason my truck isn't pairing with the remote I have for my garage door. I have a 1999 Chevy Blazer LS, and I've gone through the learning steps but I can't get the indicator to flash the successful pairing indication. Any ideas? Is my truck just too old for this opener?

Didn't work on my 2017 jeep cherokee. For either the current opener sync or the learn button sync.

What do you do if you don't have a remote, your only way to open the garage is from another car's homelink, and you got rid of that car and now you have another car with homelink but no remote????

Thanks

How do I do this without a transmitter. I programmed my older GMC Yukon without having the transmitter and it was very easy. I recently purchased a newer Jeep, and it's just working. Any help will be appreciated.

What if you dont have a garage remote

My old Genie opener does not have any buttons , what else can I do???

Hi I’m trying to do as you give out intrusion but it’s not working for me

I can not get mine to program. I get the rapid flashing light but then it will just slow blink. I have tried the remote and the learn button. No success

I have a Craftsman 139.54920 and a 2008 Dodge Grand Caravan I have tried the instructions in the video and it won't learn. Do you have any additional suggestions. I believe that it is a Security +2

Mine will not program!!! Tried several ways. I have a 2013 GMC Seirra Garodoor openers are fairly new. Chamberlain brand. Please help

Excellent tks🙏

I am having problems pairing my 08 Cadillac Escalade with Entry Gate & Liftmaster Garage Door opener. Had no problem with wife’s 2016 Cadillac SRX. Any suggestions to my older model?

Did this as described in my owners manual and it still doesn't work. Its a new garage door opener and it was working with the older opener

It's not working,tried red button in garage went back car push button no flashing respond that it's connected

My remotes are either non functional or lost. Is there any way to still program my opener to my car?

Not working for me. I don't have a garage door opener. But I'm held first and third button for 30 seconds and it reset those buttons. Then I pressed learn on the garage motor. Then I came back to car and held the first button for over a minute and nothing changed

I can't find a learn button on my garage door opener...

The buttons on both our cars suddenly just stopped working and now I’m not able to pair to either cars please help 🙏

Instructions not clear now I am the garage door

Quick question do I need to keep my other garage door opener in the car for it too continue to work