Programming your garage door opener made EASY

No video

Programming your garage door opener made EASY

Рет қаралды 191,381

3 жыл бұрын

Take a look at how EASY it is to program your garage door opener to your vehicle (If equipped). Thanks Michael for the demo!
www.glenbrookdodgechryslerjeep.com

Пікірлер: 53

@norman_sr 2 жыл бұрын

This literally took 10 seconds to do. Awesome video.

@d.c.3220 2 жыл бұрын

It may not be that easy. After syncing the remote to the button you want to use, you may have to hit the "learn button" on the motor hanging down from your garage ceiling. Click on the learn button, you then have 30 seconds to go back to your car and hit the button you programmed. The light on your motor should blink. Then confirm it works.

@victorhackbarth Жыл бұрын

I had to do the same extra step by hitting the learn button on the motor too for it to work.

@matthewmoorehead1979 Жыл бұрын

This 👍

@Eaero Жыл бұрын

Thank you! This is what actually worked for me

@123supadave123 Жыл бұрын

Perfect 💯💯💯

@MrHereWeGoYo 11 ай бұрын

Yep. The initial steps in the video plus this got it done. I believe it has something to do with whether or not your garage uses a rolling code.

@wheredango Жыл бұрын

I had to do this process after putting the wall mount for controller in learn mode, but it worked. thank you

@MarvinPhipps 4 ай бұрын

Wow I've had my dodge ram since 2019 and never knew how to program the remote this video showed my how thanks

@TheRobstr 7 ай бұрын

Worked on my 2023 Durango thanks man 👍

@alexrodriguez6437 Ай бұрын

Love the straight to the point 🎉

@stephenshelpman2318 7 ай бұрын

This worked perfect on my 2019 2500. Thank you!

@davidm.6643 Жыл бұрын

Thank you! Worked great. 🇱🇷

@bradleysnyder6540 Жыл бұрын

Awesome. Worked for me. 2022 Ram 2500

@joeb4275 Жыл бұрын

Good video, thank-you.

@jwilk3073 16 күн бұрын

what if don't want to clear all the channels and just want to program an additional door?

@RaiderNationPodcast 6 ай бұрын

What if I have no remote? I have 2009 Chamberlain door opener with no remote, and 2015 Chrysler 300

@TheMarchetti 4 ай бұрын

Worked for me (Durango 2015) thanks

@100peopledislikedyourcomme6 11 ай бұрын

For genie garage door openers, in addition to these steps you will also need to click and hold the prgm button on the garage door opener. Hold until the light turns on then go to your truck and click the button you want to program 3 times, hold each time for one second.

@Rednawp 7 ай бұрын

I did this but mine didnt work. Does the truck need to be on? The light blinks rapidly when i do this but it still doesn’t work

@100peopledislikedyourcomme6 7 ай бұрын

@@Rednawp yes the truck should be on

@sethradford9234 7 ай бұрын

Worked

@ericlarge6960 Жыл бұрын

It worked for me !

@sbridge21 3 күн бұрын

How do you do a second door? First one programs fine, second door won't take.

@dicer0075 10 ай бұрын

Thank you very much!

@guambralla88 Ай бұрын

So easy Tks

@marissaacosta4668 Жыл бұрын

Do you have to be close to the motor to program the opener to the truck

@bigrudy68nyr58 Жыл бұрын

Thank You!

@YOURBOYJAIME Жыл бұрын

Thanks 👍🏽

@davemc162 2 жыл бұрын

Thank you so much. Works great. 🏄‍♂️

@cesar2146 Жыл бұрын

Thank you

@Vedo729ify Жыл бұрын

Thx!!👍👍👍✌

@Rockinthehill Жыл бұрын

this didnt work in my new 2022 Ram Bighorn the visor buttons just quit blinking then only a slow yellow color

@edwizard62 10 ай бұрын

So you have to erase all first? What if you just want to reprogram the first button only? Someone might have the other 2 buttons programmed for other locations.

@grheryford 3 ай бұрын

Same for me. I just need program a gate code but not remove my already programmed garage door buttons

@evagibson7034 2 жыл бұрын

Omg that was too easy.. I’ll try it and come back to let you know if it worked 😆

@DominationPlays Жыл бұрын

Did it work?

@ohk_jonathan Жыл бұрын

@@DominationPlays he accidentally fell down the ladder he used to push the motor button and broke his neck, sorry for the bad news

@angelcakes1212 Жыл бұрын

@@ohk_jonathanmy my my! Healing Sent 🙏🥹🙏🙏🆙

@CharlesFunk4 7 ай бұрын

Well crap my garage door opener handheld needs a new battery 😢

@Mr_Clips012 Жыл бұрын

Who was pressing the learn button when you tried to program it to your uni-ram button 😂😂 seems crazy it won’t work for me for anything, I’ve tried multiple products and different product opener fobs, nothing..