How to program a Linear gate remote or a garage door remote

Рет қаралды 89,879

6 жыл бұрын

In this video I will show you how to set the dip switches code for a replacement remote for a garage door or gate.This remote is 310 MHZ with 8 adjustable slide pins.
Here are some of the tools that get it done home repair uses
www.amazon.com/shop/jimthecarguy
Due to factors beyond the control of get it done home repairs, it cannot guarantee against unauthorized modifications of this information,. get it done home repairs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. get it done home repairs recommends safe practices when working with power tools, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of get it done home repairs, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not get it done home repairs.

Пікірлер: 66

@davidmh 2 жыл бұрын

Super clear and to the point, thank you!

@OrganizedMess 16 күн бұрын

Thanks guy!

@getitdonehomerepair 15 күн бұрын

Happy to help!

@irvinggreines822 3 жыл бұрын

Excellent. Helpful. Thanks.

@lonwillis783 6 жыл бұрын

Cool Jim! Old Garage Door openers were like that!

@KARINAIVETTE100 3 жыл бұрын

Hi I have a question ... what about if 1 of the remotes has 8 digits and the new one has 10 digits?

@lonwillis783 3 жыл бұрын

@@KARINAIVETTE100 I would use the first 8 switched the same as the old one. If it does not work then set them all back and try the last 8 switches.

@lexbeltran1354 2 жыл бұрын

@@KARINAIVETTE100 Set the last 2 digits to the off position.

@angelabrinskele3964 2 жыл бұрын

Thank you so much you were a great help I appreciate your video!

@getitdonehomerepair 2 жыл бұрын

Glad it helped!

@marciatruman3224 11 ай бұрын

Fabulous explanation 👌 very clear. Thank you!!

@getitdonehomerepair 11 ай бұрын

Glad it was helpful!

@bassmonkey122 5 жыл бұрын

Thank you for the help!

@getitdonehomerepair 5 жыл бұрын

I'm happy to help.

@joeycatania8776 3 жыл бұрын

Super helpful- Thanks !!

@getitdonehomerepair 3 жыл бұрын

I'm happy to help.Thanks for watching.

@romilalal5197 2 жыл бұрын

Thank you very much sir.

@getitdonehomerepair 2 жыл бұрын

Most welcome

@JohnBrodt 6 ай бұрын

My remote is a 318 mhz, and it is a MT-1B, when I open it up there is no switches to change coding. Now what do I do?

@xGreenhero Жыл бұрын

Do the switches match the delta 3 garage door receiver? Not sure if i knocked a switch when I replaced the battery. Want to know before i buy a ladder to check receiver.

@TheCheats4you 2 жыл бұрын

You know it's a good community when the community has Lamborghini doors for your gate

@kimcam4485 5 жыл бұрын

Thanks. Now I can do it .

@getitdonehomerepair 5 жыл бұрын

Kim Gutierrez Thanks for watching. I'm happy to help

@omid1929 4 жыл бұрын

Can these remotes be used to program the buttons in cars for garage doors/gates?

@getitdonehomerepair 4 жыл бұрын

No this can not be used to program the car remotes.thanks for watching.

@jerzcnate 6 жыл бұрын

Woo fancy gated community lol. Has anyone ever told you that you look and sound like a mechanic named Jimthecarguy on KZfaq.

@lindatriplett9358 9 ай бұрын

Nice video but one major concern is not mentioned. If you are installing a new garage door keypad for a Linear unit that comes with a battery. You must first open the battery comparment and remove the clear seal and then connect the battery. It does not come connected even though the battery is in place.

@getitdonehomerepair 9 ай бұрын

Good point!

@lorenzobordeaux8604 2 жыл бұрын

How do I program to second remote from the first remote if when you pull the back off and there are no sliding pins?

@lexbeltran1354 2 жыл бұрын

You need to buy a remote that doesn't have dip switches. The remote that you have doesn't use dip switches, it should have a programing button.

@jamilrasooli3693 9 ай бұрын

I have lost my old remote and bought a new one. How can I know the right combination of pins please? Thank you very much 🙏

@getitdonehomerepair 9 ай бұрын

You will need to go to the main unit and see what position the pins are in (on or off )

@elzheffner5209 3 жыл бұрын

How do you change the battery?

@getitdonehomerepair 3 жыл бұрын

When you remove the cover just pull off the battery from the wiring.

@stevenhuynh654 3 жыл бұрын

Do I have to use pins? I have a remote without pins

@getitdonehomerepair 3 жыл бұрын

Is it the same frequency (MKZ)

@bahamianshaolin 4 жыл бұрын

Is it possible to change the code? For example if someone stole one of my remotes

@getitdonehomerepair 4 жыл бұрын

Yes the code can be changed. You will need to change bother the transmitter and the opener codes.

@bahamianshaolin 4 жыл бұрын

@@getitdonehomerepair great thank you!

@cooljerk8677 4 жыл бұрын

Did everything correctly I am able open my rear gate, but doesn’t work to open front gate. Any suggestions?

@getitdonehomerepair 4 жыл бұрын

You may want to check the pins again to make sure that they match the front gate

@cooljerk8677 4 жыл бұрын

@Get It Done Home Repair I may have bought the wrong type 310mhz remote for my particular gate?

@patriciaann3134 2 жыл бұрын

What if my code has a pound (#) sign as part of the code? For security the gate code is getting changed every 6 months and I am having an issue reprogramming the remote.

@nicoletteatangan3123 Жыл бұрын

Im having that trouble too. Help!

@KarenPineda-ry8tj 6 ай бұрын

I am having this problem, Help!!! 2024!!

@katelynbaker3340 3 жыл бұрын

But how do you pair the remote to the gate for the first time?

@getitdonehomerepair 3 жыл бұрын

Yes if it the same remote as in the video you will need to open the gate cover and see how the little slide pins are moved either up or down and just duplicate it in your remote.

@ticesine6589 2 жыл бұрын

My opener has two blocks with buttons to push down , is there not a way to tell us how to do it without having two remotes

@lexbeltran1354 2 жыл бұрын

Are they the same sequence?

@henrymckenna4126 3 жыл бұрын

I have a linear multi code model 308911. My code is 4 numbers but one number is repeated, so I only switch on 3 numbers. I don’t seem to know how to program it. I aim it at the “transmitter” garage door . But nothing happens. HELP.

@getitdonehomerepair 3 жыл бұрын

Does the remote pins match the garage door itself.

@henrymckenna4126 3 жыл бұрын

@@getitdonehomerepair I set the pins to match the code For the garage door. And followed the instructions. “Press the learn button then go in front of the door and press and hold the new transmitter until the lite blinks on the overhead door opener.” Still nothing. Help

@daisymay5029 3 жыл бұрын

Did this, put in a new battery and it still does not work. Any ideas?

@getitdonehomerepair 3 жыл бұрын

Was it working before you put in the battery?

@bezzaf4386 8 ай бұрын

Nice tutorial , however the remote of our community gate even-though looks similar and same frequency as in your video but does not have the pins to adjust to program , how can program it ?

@reengh Жыл бұрын

What if my replacement is still 10 but looks like tabs not pins?

@getitdonehomerepair Жыл бұрын

As long as it is the same frequency it should work . Was it the same brand

@reengh Жыл бұрын

@@getitdonehomerepair It was just a different type of switch. Worked great. My coworkers think I’m a genius!

@mariekreusch3220 2 жыл бұрын

Hello, my remote control is broken but I do not know the frequency There is no indication on it) : Here are the info that I have: Digital emetteur DT/B. Part Number DNT00043. LInear corporation CARLSBAD, CA 92009 USA RTT/D/X0266 P/N 205828. I bought a new remote control but it seems that the frequency is not good (310 MHz : DNT00017A model DT-2A). Ca you help me ? Thanks a lot, Marie

@lexbeltran1354 2 жыл бұрын

Go to Amazon and look up the info you have. It should tell you which frequency yours needs.

@mariekreusch3220 2 жыл бұрын

@@lexbeltran1354 I bought 2 new ones but they do not work... (DTA-2) bad luck 😞

@lexbeltran1354 2 жыл бұрын

@@mariekreusch3220 You need to look up DNT00043 receiver. It should indicate which remote is compatible with it. The remotes you bought are the wrong frequency. Good luck.

@mariekreusch3220 2 жыл бұрын

I did try to find some with dnt00043 (on amazone and widely on internet) but i can’t find any. I think that i will send an e-mail to the company « linear » if they can help me.

@lexbeltran1354 2 жыл бұрын

@@mariekreusch3220 I'm sure they will be able to help you find a remote that works.