How to program a CHAMBERLAIN garage door or gate opener with DIP SWITCHES [MODEL KLIK5U-BK2]

Рет қаралды 51,010

2 жыл бұрын

If your CHAIMBERLAIN remote DOESN'T have dip switches inside, you need to get a KLIK5U - some are almost identical but don't have dip switches, despite them being very similar. I had to open the box at the store to verify, and almost bought the wrong one.

Пікірлер: 46

@StillWatersofBlue 19 күн бұрын

Thank you!! This saved me from continued frustration with repeated attempts at programming my very old garage door opener. Much appreciated!

@ot1040 2 жыл бұрын

THANK YOU LORD FOR THIS VIDEO! They changed up our neighborhood gate and now nobody’s controllers work so this was really a godsend. I couldn’t figure out how to reprogram my remote, looked all over the internet and couldn’t find instructions. I was so happy when the gate finally opened! Thanks again 👍🏽

@ArthurGraybill 6 ай бұрын

I'm a garage door professional and you helped me out.👍👍👍 thanks

@munchiesthesockmonkey Жыл бұрын

Thanks! We have same remote to open garage and it suddenly stopped working after battery change. After doing what you said it works again! You are a gentleman and a scholar! 😁😁😁

@monicadiaz1201 2 жыл бұрын

Thank you so much for helping this handy girl!

@davidduvall-ko6vg Жыл бұрын

Thank you so much for this video!!! I did everything I had to do with the coding and everything and it still wasn’t working and I was very frustrated because it still didn’t work. I am happy to say that thanks to you I am finally able to open my garage with a remote.

@e.rod.moto. Жыл бұрын

Thank you !!!!! You simplified it perfectly.

@Benzlyfe2.0 9 ай бұрын

Thank god finally someone to show how to do it!! Thank you

@philsuarez7615 Жыл бұрын

Thank you, your explanation really helped, now it works!

@jennjenn4152 Жыл бұрын

Thank you so much for this video! This is the first one that has worked. I bought a house where there was no remote and the pin pad was dead.

@falcon7actual696 Ай бұрын

P😂😂😂w😮

@marialuisa3107 11 ай бұрын

Thank you so much for this video!! I finally program my garage opener🙌🙋‍♀️💓

@whatwhat0617 2 жыл бұрын

This is exactly what I needed! Thank you!

@slowstone8509 2 жыл бұрын

💛💛💛

@MJ69090 2 жыл бұрын

I had to return mine to Menards. When I opened it up, I didn't have the DIP switch panel, it was just exposed motherboard.

@shawnburden7094 2 жыл бұрын

So what’d you do?? I have to do this now :,(

@kenmerchant8170 8 ай бұрын

Thx. I was about to give up till I saw how many button presses it took you. I programmed mine to an older Versalift garage lift. Got one button programmed to lower the platform then reversed the DIP settings to get the other button to raise it.

@pantsuck11 Жыл бұрын

Thank you !!! most of the videos leave out the number of clicks part!

@esthermcgough3995 Жыл бұрын

Excellent info thank you

@abelinaespinoza5522 10 ай бұрын

You are a god sent. Thank you.

@gerardhogan6178 2 жыл бұрын

Amazing! Thanks so much

@fieryseraph Жыл бұрын

Says he's gonna help me with dip switches. Doesn't explain how to use them.

@vdub2002 4 ай бұрын

I had it all except pressing the button until it opened lmao thanks!

@Gondorjedi 2 жыл бұрын

THANK YOU!!!!!!

@taliaasims 2 жыл бұрын

Thank you

@underground8205 Жыл бұрын

Thank u so much

@ChrisEckman 10 ай бұрын

What is the model that had the dip switches? I bought one and then bought a second and the newer one is missing the dip switches. The MODEL KLIK5U-BK2 I got doesn't have the dip switches. Not sure if there's a varient in the same model or not.

@ridenda67camaro 5 ай бұрын

My new remote has 10 dip switches but my gate and old remote has 8 will i be able to still program if so what do i do with the last 2 switches?

@ana-ruxandrailiescu633 11 ай бұрын

How do I know how many hits?

@andrewd6971 2 ай бұрын

My LED indicator turns off as soon as I hit a button. Any help?

@MickeyEatsWaffles Жыл бұрын

My apartment complex has an 8 dip. Can I use this one since it has 12

@slowstone8509 Жыл бұрын

Yeah, I believe you just leave the last few in the off position

@alperkins8303 2 жыл бұрын

I bought a chamberlain remote, but it doesn't have any dip switches to set. My old remote has dip switches. Where are the dip switches?

@brianbeltran7503 Жыл бұрын

Same here

@brianbeltran7503 Жыл бұрын

My receiver has a dip switch but not the controller

@foyjamez 7 күн бұрын

If your new controller doesn't have DIP switches. Hit the program button til you get the LED. Hit the button you want til it flashes. Wait and do it again. Repeat til your opener lights (must be lights installed) flash twice. Then hit the program button again. Test you opener button. Those I can do, can't figure out if I need to change my dip switches on old remote. All the new ones are programmed, but the old one doesn't work anymore.

@garymay7145 9 ай бұрын

Is this a garage entry safety concern? I just used your info to program my chamberlain to my lift master, but now I am concerned anybody could sit outside my garage and click away until it opens. Am I missing something?

@r66cort 6 ай бұрын

Not a safety concern - an individual attempting to open your gate would also need the exact 12 dip switch code, so no additional security risk.

@kam816 5 ай бұрын

I have a gate made by elite it’s doesn’t have a learn button

@hallhoff 2 жыл бұрын

I've bought two of these in a row--I thought the first was defective--and there are no actual dip switches in it. The numbers are there, but just a bare circuit board. Am I missing something? Great video otherwise!

@hallhoff 2 жыл бұрын

Answered my own question. Similar complaints on the Home Depot website. Chamberlain changed the remote without changing the packaging. Recent versions of this don't have dip switches at all.

@jeremygoff007 Жыл бұрын

I have the same issue. Do I need to buy a different one with actual switched. If not, how did you get yours to work?

@startyappy8467 Жыл бұрын

I think 16 is the train

@dominicharrison3926 9 ай бұрын

Or just solder them bro if you don’t have the switches 😂 or just set all the switches to open on your opener

@dananamontreal5933 2 жыл бұрын

I cant get IN my garage! And can't find how to program a remote to a garage that you cant get into

@bigidol9789 2 жыл бұрын

It’s supposed to be difficult! Otherwise someone would be able to get into your garage whenever they want. Maybe call a garage door company and see if they can help. May need to cut your way in and repair the damage if there is no other way in.