No video
How to program Evinrude Etec G1 injectors (DIY)
Рет қаралды 1,408
Күн бұрынIn this video i will show you how i program my evinrude etec injectors at home. This video will save you time and money. Also, relieve the hassel of taking your boat to a dealer or mechanic. I hope this helps.
@brianjohnson1647 Ай бұрын
This first good video on how to use your phone to get that data files. Thanks saved me money and lots of time not bringing it to a boat shop
@FloridaNativeFishingChannel Ай бұрын
@@brianjohnson1647 I’m happy I could help man!
@Markb8608 4 ай бұрын
Very nice to see this discussion. Just subscribed.
@FloridaNativeFishingChannel 4 ай бұрын
Thanks for watching, commenting and subscribing! It’s much appreciated!
@EvdiagPro 4 ай бұрын
So, very nice, but only for new injector, if you are installing a used injector with zero cycles so Emm will think is a new a new injector and will not compensate aging. Good if you don’t use that engine on high rpm ranges. Brp created scan labels to install new injectors Reusing injectors, data has to be pulled from donor emm, or requested from BRP CALL CENTER with approximate engine hours
@FloridaNativeFishingChannel 4 ай бұрын
The injector I installed is brand new and has never been used. Thanks for watching
@EvdiagPro 4 ай бұрын
@@FloridaNativeFishingChannel comment corrected Thanks
@mathewlacroix7630 25 күн бұрын
Great Video, thanks! Question, My EMM LED2 is illuminated indicating an ignition/injector problem, Diagnostic Software said Injector 1 Open. I changed the injector, input the coefficient info and cleared the faults. LED2 will NOT turn off, engine will start but only run for 10 seconds. I have even rebooted the software on the EMM, with the "Bootstrap" cable. Seems the LED2 circuit did not get reset, any ideas how to ensure it gets reset?
@FloridaNativeFishingChannel 25 күн бұрын
@@mathewlacroix7630 I wish I could help with that man. I’d check out the etec forums on Facebook. Those guys have a lot of knowledge. Thanks for watching
@hansgruber2509 3 ай бұрын
Nice video what is the weakest link with these engines form you experience? I bought 2 new G1 150hp in 2019 and still under warranty, is it the EMM? How many hours on the engines? Thanks
@FloridaNativeFishingChannel 3 ай бұрын
It’s gotta be the emm. One of mine is currently in the Netherlands being fixed. I’ve got 1200hrs on them and they have been great besides the emm taking a crap last month.
@hansgruber2509 3 ай бұрын
@@FloridaNativeFishingChannel What made you pick someone in the Netherlands vs. someone domestic? Is buying used not an option? Thanks
@FloridaNativeFishingChannel 3 ай бұрын
@@hansgruber2509 Cheaper to have the emm repaired. I didn’t want to have to program a new emm.
@brianpino7274 Ай бұрын
Where do you get the software. And where can you get new injectors?
@FloridaNativeFishingChannel Ай бұрын
@@brianpino7274 Amazon has the software and you can get an injector online
Dylan Be Fishing
Рет қаралды 16 М.
Family Games Media
Рет қаралды 29 МЛН
Marine And Beyond
Рет қаралды 25 М.
Family Games Media
Рет қаралды 29 МЛН