Evinrude ETEC Exhaust Pressure Fitting / 3 Year 300 Hour Service

No video

Evinrude ETEC Exhaust Pressure Fitting / 3 Year 300 Hour Service

Рет қаралды 3,715

3 ай бұрын

Learn how to replace the Evinrude ETEC Exhaust Pressure Fitting as part of your E-TEC 3 Year / 300 Hour maintenance service.
Learn about the Exhaust Pressure Fitting, Hose, and Exhaust Pressure Orifice.
amzn.to/4cCujGF - E-Tec HPF Pro Gearcase Lube
amzn.to/3VMX6lW - Marine Lower Unit Fill Pump (Quart)
amzn.to/4aDyxvR - XPS Marine XD100 E-TEC Oil
amzn.to/3TIlx0Z - USB Diagnostic Tool Scanner KIT for EVINRUDE Outboard Engine E-TEC
amzn.to/3U2Xv21 - Champion Iridium 9005 Spark Plug - QC10WEP
amzn.to/3JbyETr - OEM BRP Evinrude Triple-Guard Marine Grease 14 oz
amzn.to/3xkRjK2 - Power Tilt & Trim Fluid
^Above are Affiliate Links^

Пікірлер: 18

@xtcamaro2668 28 күн бұрын

Just want to say how great your videos are and how much they have helped me and helped build my confidence to do the job. Thank you kind sir!

@1Cast1Fish 24 күн бұрын

Many of these jobs are fairly easy, glad they have helped out

@3DOutdoors 2 ай бұрын

Great information.

@1Cast1Fish 2 ай бұрын

Glad it was helpful!

@exogrid07 3 ай бұрын

part numbers for hose, and orifice??

@hgvenom 3 ай бұрын

Same thing, I never even knew my engine had one. When I changed my hose a year ago I cleaned up the fitting at the exhaust and put back together the hose with no orifice restrictor,

@1Cast1Fish 3 ай бұрын

P/N 0353038 Restrictor Plug P/N 0352415 Hose, Exhaust Back Pressure Nipple to EMM Double check with your specific motor model number

@1Cast1Fish 3 ай бұрын

It regulates the exhaust pressure that the EMM see's, along with preventing carbon from ending up in the EMM

@hgvenom 3 ай бұрын

01:25 hi, after I've watched your video I've realized my E-tec 175 2011 (don't know if the model/year matters) does not have the "orifice restrictor" you mentioned, nor I was able to find in the service manual (pg 95, MAINTENANCE - EXHAUST PRESSURE FITTING - Evinrude E-TEC 2010 Service Manual). Would be so kind to post the part number for this orifice restrictor? In the manual service at the same mentioned section talks about a Diaphragm assembly. Do you know which part this is? ~ If barometric pressure reading is accurate with hose removed, replace hose and diaphragm assembly. and inspect exhaust fitting for restriction.~

@1Cast1Fish 3 ай бұрын

Not sure honestly, the orifice was in my hose right at the EEM. Not sure if something changed between years or not. I do not have the P/N on hand, however I ordered all my parts from Barnicle Bills Marine...they specialize in ETECs and are a wealth of knowledge.