How to program KNX: ETS5 Introduction Part 2

How to program KNX: ETS5 Introduction Part 2 - Ivory Egg

Рет қаралды 10,166

4 жыл бұрын

ETS5 is the software used to program a KNX installation in a smart home or intelligent building so if you're new to the application or just need a refresher, this video shows you how to program a project using the software including parametrising devices and creating group addresses.
To Download ETS, create an account at my.knx.org
Subscribe to our channel for more videos like this- / @ivoryegg
For more information on Ivory Egg and how we can support you on your next project visit our websites:
www.ivoryegg.co.uk/
www.ivoryegg.co.nz/
www.ivoryegg.com.au/
___________________________________________________________________________
Ivory Egg is an independent wholesaler of KNX products and accessories from an extensive range of manufacturers.
We focus solely on supplying the best products, with excellent customer service and first class international logistical and technical support.
We supply a full range of KNX product and accessories from back boxes, drilling tools and distribution boards right through to the latest switches and back end, logic filled components. We have great relationships with many manufacturers and as such we are able to source most KNX products. To ensure a first class service we hold stock of suppliers that include but are not limited to ABB, Basalte, B.E.G, Gira, Kaiser, Somfy, Theben and Zennio.
In addition to product supply, our aim is to support KNX Integrators, Architects and other industry professionals with technical support and assistance with product selection. As a KNX Training Centre we can provide KNX Training at various levels and we have a showroom spaces show-casing front end and back end products.

Пікірлер: 10

@djstu10 3 жыл бұрын

If I could like this video every time I come back to it to check something, it would have a 4 digits like count

@peter3099 3 жыл бұрын

Really good mate! Thanks for that!

@tomislavsimudvarac163 3 жыл бұрын

Hello, Can you do more videos ? You are so great teacher. How do AND OR NOT functions ? How set a time for each action like roller go up on 7 hour or down 22 hour, turn on lights out house in 22 hour ?

@phoniex231 2 жыл бұрын

Just a scenario, if you happen to add more devices (actuators). Then, its function will be monitored by the group-address, but how will the system identify whether it is the actuator in the kitchen or in the sitting room. I have little knowledge about one BMS system, and out there you need to add the MAC-address of the actuator, so that corresponding relays and its subsequent lights respond to one particular actuator or relay. How doe the addressing of the devices work in KNX

@bilguunbatsuuri4733 3 жыл бұрын

first of all thank you for your tutorials. it helps me a much i have a question about ETS. how do i upload my ETS program to devices? I mean do i must only use KNX IP router to upload or is there a any other way to do that? for example, if i am using only actuators and iswitch to control lights, how do i program it?

@ivoryegg 3 жыл бұрын

Thanks for the kind words. You will need a USB Interface or a IP Router or Interface. There are also lots of KNX IP devices that have an IP interface connection you can use to program as well.