How to program replacement keyfob key fob for 2011 to 2015 Camaro if you do not have a working one

No video

How to program replacement keyfob key fob for 2011 to 2015 Camaro if you do not have a working one

Рет қаралды 132,082

Күн бұрын

Many have asked . How do I program my keyfob if I have lost or damaged my original? Did some checking with my local dealers. Most of course would say, you have to bring it in so "we" can do it. Of course that involves and expensive tow truck plus the dealership charge. Finally found one service tech that would tell me. The following video has that info. Hope it helps. Will be on the search for more was and will compile them into one video.
Equipment
Software amzn.to/2rWNtBA
Canon 7D amzn.to/2rLaWX4
Canon 24-105L Lens amzn.to/2wLudfN
Lexmark memory card amzn.to/2rJmKZF
Black Rapid Shoulder strap amzn.to/2rMFNBC
Gopro Hero 5 amzn.to/2ImaBQR
Lavalier mic for gopro amzn.to/2IiP3Zf
Suction cup mount for gopro 5 amzn.to/2wINluS
Gopro memory card amzn.to/2IrJfZO
gopro 5 battery with charger amzn.to/2wKiI8r

Пікірлер: 399

@diordeleon9771 6 жыл бұрын

You sir.... Are absolutely awesome!!! Replacement key fob was only $15 this video saved me $150(dealership charge)

@CamaroTime 6 жыл бұрын

Aw shucks. You are too kind. Just trying to help out where I can. I am very pleased that it did indeed help you. That is the whole reason for me making the video. Thank you so much for watching.

@ladysuave7442 5 жыл бұрын

Thank you so much!!!!!! I've watch every video, read the entire owner's manual over & over and spoke with several machanics, and still was out of my car for a week. I found your video, and what do you know? Within 45 minutes I was back in my car!!!! Thank you so much Sir. And may God Bless you abundantly!!!

@CamaroTime 5 жыл бұрын

Truly my pleasure. I am just so glad you found the video and it was able to help you even the slightest. Thank you so much for the kind words and for watching

@zanthonyrobin5027 3 ай бұрын

Oh i 8h8v8. 999@CamaroTime

@koldwarjames546 5 жыл бұрын

my man, you are a life saver, broke my original key fob for 2013 chevy malibu. lost it two weeks ago. got my new key from the dealer, watched both part 1 an two of you video followed the steps for 3 times of 10 min an what do you know I'm back on the road .. your the best was able to reprogram it without the original key.. hit the like button an also subscribed.. tha is again..

@CamaroTime 5 жыл бұрын

Hey bud. So super stoked it helped you out. That is the whole reason I did those videos. To try and be of some help as there were just no good ones out there. Thank you so much for watching

@dinahames86 5 жыл бұрын

This worked great for me. I told the dealer I had the key fob and not the key part. They said no problem I ordered the key paid for it went to pick it up they tell me I need to tow my car there to get programmed. Watched this video 30 minutes later I was back on business.

@CamaroTime 5 жыл бұрын

Excellent. So very glad that it helped......Thank you so much for watching

@ivanortiz390 5 жыл бұрын

I just fixed it doing what you did on the video thanks a lot you just saved me 150 to tow my car plus 93 dollars the dealer was gonna charge me... hell yeah!

@CamaroTime 5 жыл бұрын

Sweet!!!!!! SO glad it worked for you and was able to help. They want to charge way tooo much for doing this. And it is so simple. Thank you very much for watching

@riverratscoalco.attorneyat7647 4 жыл бұрын

Thank you so much! I was able to program my key fob for my 2012 Chevy Cruze by watching your video! You saved me a lot of money and trouble!!!!

@CamaroTime 4 жыл бұрын

So very glad it was able to help you. That is the whole reason for them. Thanks for watching

@japreston11 5 жыл бұрын

Thanks for this video!!! You save my Saturday!! Glad I didn’t have to get my wife’s truck towed to get the key programmed.

@CamaroTime 5 жыл бұрын

Ah shucks. Truly all my pleasure. So glad it worked and could help out. Thank you so much for watching

@devinrios389 5 жыл бұрын

Thank you so much for your video. I was stuck in a whole other city! I went to the dealer had a new key and hoped this worked because of your video! Thank you so much!

@CamaroTime 5 жыл бұрын

Truly my pleasure. So very glad it could be of some help. Thank you very much for watching

@davis6192 5 жыл бұрын

I cannot stress how much this video just helped me......THANK YOU...

@CamaroTime 5 жыл бұрын

Truly all my pleasure. So glad I could be of a little bit of help. Thank you for letting us all know it worked and thank you so much for watching

@7outkast7 3 жыл бұрын

Nothing against you… but low key was skeptical to try because it seemed fake but it 100% worked! Thank you for putting this info out there! Huge help!

@CamaroTime 3 жыл бұрын

Hey, no worries. I understand completely....SO glad it helped. Thanks for watching

@CA-rg2iq 5 жыл бұрын

You good sir are amazing!!!! I went to Chevy to get my key replaced specifically explaining that I could not bring the car to them...I only had the money for a key and asked is it possible for me to program the key if I don’t have the master? Sure they said! It won’t be a problem for you at all to do it yourself....then after I paid for the freaking key told me “oh you’ll actually have to have the car towed up here and we’ll have to do it for about $150 plus towing fee” so they basically told me straight up that they robbed me...didn’t give a damn about my circumstances they just wanted their money at any cost...you helped me out a ton! Fuck Chevy mechanics!!!!! I’ll still buy their cars but I’d rather take a rusty disease riddled fork to the ass then go through their auto shop ever again!

@CamaroTime 5 жыл бұрын

Ah heck. It was truly all my pleasure. Just glad I could be of some help. They tried robbing as well. That is what started me down the KZfaq path because I thought that they had to be doing others the same way. So I made this video and a couple others about the same thing. Thank you very much for watching

@erikagarcia2171 5 жыл бұрын

Worked on my 2011 Chevy Cruze you saved me $170 thank you!

@CamaroTime 5 жыл бұрын

Super glad it worked for you and letting everyone know. Thank you so much for watching

@leonardomartinez5689 5 жыл бұрын

Thank you very much! My original key fob for my 2012 Chevy cruze was all messed up didn't work at all Did what you said on the video with the replacement key fob I got and it worked! I was so glad Thank You! Thank you!!

@CamaroTime 5 жыл бұрын

Aw shucks. I am just glad the video was able to help you....The dealers want waaaay too much to do this. Thank you for watching

@nehemiahabraham9974 5 жыл бұрын

Worked like a charm. I only waited like 2 minutes in between but it still worked. Thanks camaro time!

@CamaroTime 5 жыл бұрын

Great news bud. So glad it worked for you. Thank you so much for watching

@funfreshflytodeath 4 жыл бұрын

You sir, are an angel!! Really! I pray that God blesses you big. The whole process worked perfectly and we got our car on and running. Thank you so much for helping us and many others. We hope you have a Merry Christmas and a Happy New Year!

@CamaroTime 4 жыл бұрын

Why thank you so very much. So glad I could be of just a little help and it worked for you. Merry Christmas and Happy New Years to you and yours as well. Thanks for watching

@funfreshflytodeath 4 жыл бұрын

@@CamaroTime You're very welcome! You could say it was a Christmas miracle lol Thank you too!

@emersonorlandoordonez1288 4 жыл бұрын

thank you it is a cool tip, I did my 2012 chevy cruze and everything went well, even the door locks work with the new fob, again thank you

@CamaroTime 4 жыл бұрын

Excellent. So glad you got yours to work. Thanks for watching

@Surleigh 5 жыл бұрын

Amazing! Here's an update. After the third 10 minute wait, I turned off the ignition and removed the key. After reinserting the key back in the ignition and turning it on, nothing happened. So I turned off, removed the key and reinserted it and then wah lah. It worked!

@CamaroTime 5 жыл бұрын

Excellent. SO very glad you got it to work for you. And thank you for letting us all know. Thank you for watching

@MANZELLO3 5 жыл бұрын

I appreciate this video! I will definitely try it when I get my new key in 🙌🏼

@CamaroTime 5 жыл бұрын

Excellent. If you need any help just let me know. Thanks for watching

@jameskim4748 5 жыл бұрын

Amazing! This worked on my 2016 Chevy Trax. Much appreciated! Keep up the great videos!

@CamaroTime 5 жыл бұрын

SUPER!! SO glad it could have played a little part in getting you going. Thank you so much for letting us know it worked and for watching

@diegosc985 3 жыл бұрын

Video actually starts at 4:07 if that helps. 4:07

@donedds534 6 жыл бұрын

You are a freaking lifesaver! It worked on my 2013 Malibu. The only thing that I didn't know is after the third 10 minutes the light never turns off. So after that third 10 minutes I turned the key off pulled it out put it back in, turned the key all the way and the car started! So appreciate you doing this video!

@CamaroTime 6 жыл бұрын

EXCELLENT!!!!! SO glad it helped. That is the whole reason for me doing these videos.....Thank you so much for watching

@michaelswenson199 5 жыл бұрын

Dude, you are the man....thank you so much for taking the time to do this video for people.

@CamaroTime 5 жыл бұрын

Aw shucks. Thank you...….So glad it helped out. Thank you ,,,,for watching

@drewchainzs8587 5 жыл бұрын

I can't remember the site, it's an OEM key though Ford Lincoln Mercury. It's very close to the original but the RFID placement and the circuit board are slightly different. Probably due to trademarks

@CamaroTime 5 жыл бұрын

What year is yours? ANd what make. If it is a Camaro most of the time you can pop the cover off where the key goes and pull the emergency key out of the fob and start it that way. Take a look at page 8 if it is a Camaro my.chevrolet.com/content/dam/gmownercenter/gmna/dynamic/manuals/2017/Chevrolet/Camaro/2k17camaro1stPrint.pdf Thanks for watching

@IPeeOrange 2 күн бұрын

Thanks for the video. Did you go to the stealership to get the key cut? The cutting does not look like something that a local Mom and Pop hardware store can do. Thanks!

@VERDICT_SQUAD 6 жыл бұрын

Showing our support sir. We liked, watched, commented and got your red button smashed.

@CamaroTime 6 жыл бұрын

Thank you very much. Heading to yours as we speak

@tony27ortiz 5 жыл бұрын

Thank you for the advise. I have that problem on my GMC Terrain and I'm going to try that method, hope it works......

@comedyman112 5 жыл бұрын

Feedback?

@lmarietv6341 4 жыл бұрын

Im having the same issue now with my gmc terrain. I only have one fob. do I need a second one?

@phyloQQ 4 жыл бұрын

Thank you so much! So glad I found this video! 30 + 7:29 minutes well spent!

@CamaroTime 4 жыл бұрын

So very glad it helped......Thank you for watching

@TheFlashSpeedforce 5 жыл бұрын

Very thorough, and very well explained, thank you!!

@CamaroTime 5 жыл бұрын

Thank you so much for watching

@fatherandsoncamarotimetexa927 5 жыл бұрын

Great video !! Learn something every video brother ! Keep em coming ! God bless

@jayherde0 4 жыл бұрын

I did this 5 days ago on a '17 Silverado ... I had one working key with no fob ... Bought and had a new key cut ... I used this procedure (which is in the owners manual), starting with the NEW un-programed key ...This erases all key codes from the vehicle and sets the NEW key active ... This only works with a NEW un-programmed key, so you have to start with the NEW key ... I immediately took the NEW key out and inserted the OLD key (which is now NOT recognized) and turned it ... I now have two keys that work - I think I could have inserted a 3rd through 10th un-recognized key and programmed it ... However, I used the two-working-key method to program a 3rd key several days later ... This procedure was also in the owners manual ... BTW - Besides the shape of the cutout trough, I believe these keys have laser etching in the cutout trough that makes each key unique ... My guess is that the trough works, like keys have always worked, for doors and other non-starting uses ... Yes, this means that with a mechanically duplicated key, someone can steal your vehicle in 30+ minutes ... AND deactivate YOUR keys in the process ... My next step is to get a fob and get it programmed

@CamaroTime 4 жыл бұрын

You are correct. But the reason I did the video is for those that do not still have the owner's manual. And yep, theoretically someone could steal your ride this way. Glad you got yours going. Thanks for watching

@joyceevans200894 6 жыл бұрын

It worked !!Halleujah!Great video!

@CamaroTime 6 жыл бұрын

I am so glad it worked for you. Thank you for watching and letting us all know. Now,,,,,,enjoy

@jacobparsons4085 5 жыл бұрын

I'd like to share my expierence with everyone. My sister lost her main key fob and only had a key without fab that was still programmed from the ORIGINAL set of keys (she has lost her keys multiple times). To program this single key, I followed the steps in this video. However, the third time I put the key in(without cranking), after ten minutes, the dash light went off with a message, but then almost immediately turned back on (dont know what the message said). After waiting 11-12min to see if the light would go back off, I decided to take the key out, put it back in and try to crank it. Nothing happened. I turned the car off, DID NOT REMOVE THE KEY, tried cranking it again, fired right up.

@ronzioman4411 3 жыл бұрын

Excellent thanks...worked on 2014 Caprice

@alvinjacob3410 5 жыл бұрын

Very helpful thanks you saved me 80$

@CamaroTime 5 жыл бұрын

Excellent. So glad it helped. Thank you for watching and allowing me to contribute a little

@alvinjacob1798 5 ай бұрын

Your awesome thanks 🎉

@alvinjacob1798 5 ай бұрын

Did this before and years later Yur still here thanks bro

@CamaroTime 5 ай бұрын

@@alvinjacob1798 My pleasure. Just glad I could maybe help out. Thanks for watching

@breannadanniellle 6 жыл бұрын

Yay!!!!!!! It worked on my 2012 Chevy Sonic!!!!!!!!!!

@CamaroTime 6 жыл бұрын

Yay! Congrats. So glad it could be of some help. Thank you for watching and commenting

@shaylagadsden2683 5 жыл бұрын

I have that same Car, where did you buy your key fob?

@justalize6285 5 жыл бұрын

Same

@keithhernandez4319 Жыл бұрын

I just bought a 2013 camaro 2LT but it don’t have a fob of either kind just 2 keys. So I ordered a switch blade key fob off eBay and I plan to have a key for it made. Will this work to program it beings it’s a 2013?

@CamaroTime Жыл бұрын

There are 3 ways I know of to program it. Actually you don't even need to have one made. Just heat one of the two you have (hold with pliers) and pull of the plastic part. There is actually a notch in the key . Just take the blank out of the fob and swap with the key.......Did you order the correct one? Did you get the number from GM? Thanks for watching

@mikedyer5954 6 жыл бұрын

Thanks for the videos. I just purchased a used 2011 Camaro and it only came with one set of keys. The blade had already been removed out of the fob and the key is detached post recall. I purchased a new key and fob from Amazon. I made sure the FCC id matched as you mentioned. I had my new key cut at the dealer and it programmed just like it did in your video by using the existing key first. Since the replacement fob blade is not cut, how can I program the fob to work with the car?

@CamaroTime 6 жыл бұрын

Hey there. Thanks so much for watching the video. It means a lot. I am not certain. But I have heard that, if you dangle the fob on the working key and do the security reset like in this video. Give it a try and please let us know the outcome.

@Toofastfourluv 5 жыл бұрын

Did they charge you to cut it?

@aprilbrown2786 2 жыл бұрын

Hey we’re you able to program the fob without the key being cut? If so please respond with how you did it….

@SilverShadow02 6 жыл бұрын

What if every time I insert the key, the alarm comes on? I can use the key fob to turn the alarm off, but will this method still work if I do that?

@CamaroTime 6 жыл бұрын

Hey thank yo for watching. That is a new one on me. I have no idea why it keeps going off. I am uncertain about the alarm but, it will program the fob

@fortyforfree Жыл бұрын

Just bought a 2012 terrain ( neighbor flips repo cars) and it only came with a key ( no fob ) what do I do? Just order key fobs from Amazon, have a locksmith duplicate the key and I can program it with this 3 x 10 minute method ?

@CamaroTime Жыл бұрын

Problem is, the FCC numbers and such on the fob would have to match to the new one off Amazon. Since you do not have one, there is no way to know. So you will have to take the vin number to the dealership and purchase a fob through them......Should only be like $40-$60...And then do the 3-10 relearn. Thanks for watching

@firefurygaming875 Жыл бұрын

Does this change at all if I’m breaking in 2 new key fobs at once?

@CamaroTime Жыл бұрын

Not at all. Unless there are too many keys stored. Then one just will not program. Thanks for watching

@Surleigh 5 жыл бұрын

I have 2014 Chevy Equinox. After failed attempts to replace my fob, the key stopped working. So I am following the suggest procedure in this video and I have done the second 10 minute deal. I will return after the third and give an update

@JinkxSoldga 5 жыл бұрын

4:18 You're welcome

@CamaroTime 5 жыл бұрын

Yep and if you don't know why,,,,,0:00 Thanks for watching

@mrsflyingout 4 жыл бұрын

Camaro Time I did the 10 minute sequence 3 times (set a time on my phone each time) and I still see the key/lock icon. What do I do?

@adedoyinz Жыл бұрын

Sir, will this work on chevrolet orlando 2011 too pls

@CamaroTime Жыл бұрын

I honestly have no idea...Only one way to find out? Thanks for watching

@miltonthompson5517 4 жыл бұрын

I have to change the computer in my 2014 chevy cruzs do you know if this will work when I change it

@CamaroTime 4 жыл бұрын

Have not run into that but it should.

@lmarietv6341 4 жыл бұрын

i changed my computer 2. about to try this with my fob

@jesseruiz1991 3 жыл бұрын

So I have a key separate from the keyless fob my current key fob unlock button doesn’t work tried new battery’s and what if I don’t want the key on the fob I just wanna program the fob

@CamaroTime 3 жыл бұрын

You will need to dangle the fob on the key during programming. Then take off if you like. Thanks for watching

@jesseruiz1991 3 жыл бұрын

@@CamaroTime I’m sorry what do you mean

@collinc552 3 жыл бұрын

My key works but not my key fob itself for locking, unlocking, and opening the trunk, I changed the battery and it still doesn’t work. Any suggestions?

@CamaroTime 3 жыл бұрын

When you say your key works but not the fob , exactly what are you referring to? The old fob? A new fob? Thanks for watching

@collinc552 3 жыл бұрын

I just recently bought my car and the guy said the fob stopped working. I changed the battery and the fob still doesn’t work. I’ve been trying to figure out how to reprogram the fob to see if it will still work but I haven’t found any info on how to do the reprogramming without the switchblade key due to me only having the regular key for the door that’s separate from the fob itself

@CamaroTime 3 жыл бұрын

Did you watch this video and try the procedure starting at 4:21 ?

@Zenbudd6849 Жыл бұрын

Where can I get a key fob cut for 2010 Camaro

@CamaroTime Жыл бұрын

Most Ace Hardware stores do it. Thanks for watching

@marshaastar 5 жыл бұрын

Thanks for the information ❤️

@CamaroTime 5 жыл бұрын

More than welcome. Thank you, for watching

@georgerugman4793 6 жыл бұрын

video could have been about 80% shorter lol

@CamaroTime 6 жыл бұрын

Thanks for watching

@khaledalsayeh9549 4 жыл бұрын

thank you for your videos . I tried this method but didn't work for me . I bought my key fob from the link you linked blow the video from amazon . I tried to do the steps in the video but didn't work for me and the security light kept flashing ( the light went off and on the whole time ) . I kept the key in run position for 30 min and nothing changed . so I'm asking for your help . thank you

@khaledalsayeh9549 4 жыл бұрын

btw its 2012 camaro . I have only key with out fob got it from the dealer ship

@CamaroTime 4 жыл бұрын

Sorry to hear you are having issues. First, I have no link to them in Amazon because there are soo many different ones and prices. Did you make sure the numbers on the side of the fob are correct for your car. I know you can not check against the old one because you do not have it. but the chevy dealership can give you that info. if it is not the right one it will not work

@ahmnthabay4554 6 жыл бұрын

So if I buy a key fob from online and get it cut as my working key and do these steps the new key will be able to start my camaro?

@CamaroTime 6 жыл бұрын

Hello. Thank you for checking out my video. Per the owner's manual and as long as you get the right key fob for your vehicle, yes. It should work. There are several different methods depending on year of car. Easiest of course is to have a working key and use that method. But per the manual and dealership, it should indeed work. Do you not have a working key?

@AIC68 5 жыл бұрын

Hey brother, I have a question? I am not sure if you can help. I have the 2010 Camaro. I have 2 new keys and 2 old and the car said 5 keys programmed. I took a brand new flip key from Chevy...... did the 3 ..... 10 mins each and then the car said 1 key programmed. I started the car and let it run for a min or two. I turned the car off and now the fob doesn’t work at all. Then proceeded to take the next new key and try and see if it would work. It programmed the 2nd key but same thing ......key works but not the fob. Then I added a old dangle key and old fob. Same thing. Now the car says 3 keys programmed but only the 3 keys work. Not one fob works at all ??????????? What step would you do next? Just trying to get some ideas ? Wondering if I should just star over?? Please any help would be appreciated. Thank you

@deshaunpeterson6399 Жыл бұрын

My question is can i just buy a key fob not get it cut and just use the fob to unlock the doors

@CamaroTime Жыл бұрын

I honestly have no idea. You could try attaching it to the working key and programming it...........Thanks for watching

@dt9226 2 жыл бұрын

I tried everything in all three of the videos and tried to switch back to my old key fob and now it won't work 🙃 smh. I am doomed please help.

@CamaroTime 2 жыл бұрын

So,,,nothing is working? Horn, alarm, door locks, trunk, nothing???? Battery in backwards

@dt9226 2 жыл бұрын

@@CamaroTime sir, the buttons all work with with both the old key and the new key but anti theft won't go off unfortunately.

@richyboi7206 Жыл бұрын

I only have one key and saving up to get me a spare that's going to cost me $300 or so but after watching this video and reading the comments please help correct me if I'm wrong not understanding that if I can get a blank spare key $15 key and be able to program the new spare key to my original key only having one with the dangling remote programming the spare key to my key file being able to use both key file ? I only have one key file with the dangler remote I need a spare just in case I lose it but don't have the money can I just go buy a key file programming it to the key file with separate remote would I be able to use both

@CamaroTime Жыл бұрын

LOL. Now I am confused. Sorry. You have one key with the dangler.....If it were me, I would buy another one off of Amazon (make CERTAIN the numbers on the side match), get it cut to match the original. Insert the original and crank car and let run 5 seconds. Pull out the original and insert the new one. Crank car and let run for 5 seconds. You will then have two keys both with working fobs. Total about $30-$35....Thanks for watching

@richyboi7206 Жыл бұрын

@@CamaroTime thank you for your help. What number on the key? I have no numbers on my key. I have one key alarm push start key separate I think it's the dangler that used to have a key on there but I'm guessing it broke from the original owner

@CamaroTime Жыл бұрын

If you look on the side of the fob, where the key would fold up into it. There is a cutout for the key. Look really good and you will see a bunch of numbers including the FCC number

@dickchainy1420 3 жыл бұрын

Ok....how about this. I have my key (the dangler) but I just wanted a new fob. They gave me a new key AND fob but I just want to program the fob. Can I program the new fob without using the new key?

@CamaroTime 3 жыл бұрын

There have been some that take the fob and hang it off the old key and do the new key reprogram. Like if all keys were lost. And had success....There are others that have said it does not work. Only way to know is give it a try. Thanks for watching

@1mantisco 3 жыл бұрын

Does the new key need to be cut?

@CamaroTime 3 жыл бұрын

Need more info. Are you replacing a fob? Is this the only fob. Where did the fob come from?

@1mantisco 3 жыл бұрын

@@CamaroTime 2010 camaro I have the key fob (2) but the buttons broke i want to replace them. I did have Chevy replace the keys ,because of the recall but ...well we know how cheap they are and I didn't get a new fob

@jayhunter6637 5 жыл бұрын

Hey do I turn the key until the battery light comes on or just anti theft light

@Qwest2xxxp 5 жыл бұрын

Going to try this after work

@Qwest2xxxp 5 жыл бұрын

It didn’t work for me. The lock disappeared. I tried to start it and nothing happened. Took the key out and tried to start it again and the lock reappeared

@CamaroTime 5 жыл бұрын

Let's try to work through this. Where did you get your new fob?

@Qwest2xxxp 5 жыл бұрын

Camaro Time it came with the car. Bought it used. It wasn’t working from the purchase. Thought it was the battery. I’m using the the regular key for now.

@CamaroTime 5 жыл бұрын

Does it unlock the doors and pop the trunk>

@Qwest2xxxp 5 жыл бұрын

Camaro Time yes the key fob does. It also starts the car when I first start it with the regular key

@bloop1233 2 жыл бұрын

Does anyone know if this works for a Chevrolet Equinox 2011?? If so , did you use same key different key fob or new key n fob

@CamaroTime 2 жыл бұрын

It should work. I am not sure if there is a chip in the key or not

@David-pz7mh 3 ай бұрын

It will work without getting key cut

@CamaroTime 3 ай бұрын

The fob? Absolutely..... Thanks for watching

@IPeeOrange 2 күн бұрын

How do you program the fob without getting the key cut?

@curtisharvey7255 6 жыл бұрын

I only have one key fob. I ordered a new one and received it in the mail. i changed the blade of the old one and added it to the new key fob. I went out as you described. But the difference it that I inserted the new key fob with the old key black and I see the lock. I did that three times and the alarm comes on and the car with the lock keeps on showing up. If you have any additional suggestions, please let me know.

@CamaroTime 6 жыл бұрын

Did you let it sit , switched on for the correct amount of time?

@curtisharvey7255 6 жыл бұрын

Yes and that did not work. But I figure out a easy fix for it though! I took the working blade that I had on the new key fob off so that I could easily add it to each fob. I put if back on the old fob, but I did not add the little piece back in tot secure the key blade to the fob. I started the car with the old blade and the old fob and it started. I then removed the key and added it to the new fob and it programmed the fob. I then secured the blade in the key fob and everything works fine. The dealership service manager that I talked to today should have told me that but he wanted me to purchase their services and he said the only thing I could to is tow my car to the dealership and they would program it. $200 for the tow and $150 to program it. I also called a mobile locksmith that wanted to charge me $150-$200 to program the new key fob. This fix was easy and it you do not have a primary working blade key and key fob, this is an alternative of how you can get a new working key fob programed with your old key blade.

@CamaroTime 6 жыл бұрын

Sweet. Thanks for letting everyone know.........Yet another way to fix the fob issues

@danschenck9442 5 жыл бұрын

thanks for info ,,having issue with 2010 Camaro ss, and have that lock out icon on, going to try it instead of dealer.. AGAIN THANKS FOR INFO

@CamaroTime 5 жыл бұрын

More than welcome. All my pleasure. Please keep me updated. Thanks for watching

@rotwiler7674 4 жыл бұрын

My 2010 was getting key stuck in ignition. Found out if I let car slightly roll forward or back to fully lock into Park, key comes right out.

@oscarsanchez1585 5 жыл бұрын

will this work on a 2013 chevy equinox?

@CamaroTime 5 жыл бұрын

It is certainly supposed to

@chazzy2996 4 жыл бұрын

thanks dude it worked

@CamaroTime 4 жыл бұрын

Excellent. So very glad it helped. Thanks for watching

@bomoneyslots 3 жыл бұрын

Can Are use my old Camaro key

@AIC68 5 жыл бұрын

Hey there, love your videos. I have a question? I have 2010 ss. The car has 5 keys programmed the car says. So I have 2 new key fobs with laser cut switchblade. I also have 2 new key fobs with blank keys on them but have 2 new hanging keys to go with the fobs. So if I do the 30 min thing and reprogram say key one ,how do I had the other 3 new keys and fob? I hope I didn’t make that sound confusing. Thanks for any help. Also I can’t find where to get the little plastic strip that says camaro on it for the 2 new dangling keys?

@CamaroTime 5 жыл бұрын

Thank you . Here is the TSB for the key fob slot fix. it has the part number in it Subject: Transmitter/Fob Appearance After Integrated Blade Removed Models: 2010-2015 Chevrolet Camaro Attention: This Bulletin also applies to any of the above models that may be Export vehicles. This Bulletin has been revised to add a Note in the Warranty Information. Please discard Corporate Bulletin Number 15-09-83-001. Condition Some customers may comment on the appearance of the transmitter after the integrated blade has been removed. Cause 2010-2014 CamaroThis will occur after Recall #14294 has been performed. 2015 CamaroProduced with a separate key and transmitter. Correction Install a new insert in place of the integrated blade and install a new battery cover following the steps below:Remove the original battery cover and discard. Locate the slot in the chrome part of the transmitter and install the new insert in place of the integrated blade as shown, making sure it is fully seated. Note: If the slot is not showing, press the release button to “flip” the chrome part over. (1)Locking Tab Press and hold the button to “flip” the insert into the closed position and then release the button. Important: Excessive force on the insert may crack the tab portion that is inserted into the slot. Install the battery and new battery cover. Be sure the retention tab on the insert engages with the underside of the battery cover. Important: Verify the positive “+” side of the battery is facing up. Parts Information Part Number - 23345002 Description - 10 covers, 10 inserts - Services 5 Vehicles (2 Transmitters per vehicle) Warranty Information Labor Operation Description Labor Time 6480168*

@CamaroTime 5 жыл бұрын

As for the keys. Do the 30 minute deal for one key. Once it is up and working use it as the main key. Insert main key, crank car , run for 5 seconds. Turn off and remove key. Immediately insert new key and start car. Let run for 5 seconds. That key should now be programmed. And just continue.

@AIC68 5 жыл бұрын

Hey brother thank you! I received my little plastic Camaro strip for fob. I think it looks cool. I am trying all the keys this weekend. Will let you know how it turns out. I could make a video of it but never have on KZfaq before. Thank you for your help! Camaro Time Rocks!!

@winchestermusic9234 3 жыл бұрын

So I tried cranking the car before I saw this video. Does that mean I’m screwed

@CamaroTime 3 жыл бұрын

Not at all. just pull key out wait a few minutes and start again. Thanks for watching

@winchestermusic9234 3 жыл бұрын

@@CamaroTime it works. Saved the day haha

@Ron-h4l 6 жыл бұрын

When buy my switch bleed key from my Chevy dealership they told me how to reprogram it for free.

@CamaroTime 6 жыл бұрын

Cool deal. Thanks for checking out the video

@sergioss1923 6 жыл бұрын

My key fob lock/unlock trunk all the buttons do not work, yes I’ve replaced the battery and I even tried using one of my other keys and the same thing . I don’t know what the problem is

@dopeman318 5 жыл бұрын

How much does it cost to cut key

@CamaroTime 5 жыл бұрын

If you take it to ace hardware 15 to 20 dollars

@AnthonyWitherspoon 4 жыл бұрын

Do you have to have the key cut first.. I programed my fobs, they lock and unlock and remote start works but doesn't push start

@CamaroTime 4 жыл бұрын

Hello there. First do the numbers on the side of the key fob match the original? If not then they will not start the car. Secondly the computer recognizes the fob when you stick the key in for programming. SO, how did you program without having it cut> Thanks for watching

@jhall1537 4 жыл бұрын

Your videos are awesome! I am the proud owner of a 2014 Camaro but I absolutely DESPISE the fob being separate from the key with this dumb recall. When I purchased the car the dealership had already performed the recall for both keys. And I've been stuck with it ever since. I don't plan on getting rid of my baby any time soon. Any suggestions on how I may combine the blade back into the fob without purchasing a whole new fob and getting the blade cut and programmed?

@CamaroTime 4 жыл бұрын

Why thank you so very much. You can but it is a bit of a pain. It requires you to cut or melt off all the plastic on the key. Then some have the hole to reinsert and some do not. if not you will have to drill the hole. Thanks for watching

@jhall1537 4 жыл бұрын

Camaro Time but I can just order a blank and have it cut and insert it in my current fob and put pin in it to secure?

@CamaroTime 4 жыл бұрын

@@jhall1537 Yes sir.......

@jhall1537 4 жыл бұрын

Camaro Time great thanks! Any recommendations on key cutting? Dealership?

@CamaroTime 4 жыл бұрын

@@jhall1537 First if you order off of ebay or Amazon make sure the numbers on the side match. Then you can go to any Ace hardware and they will do it for you.

@drewchainzs8587 5 жыл бұрын

Wish there was a cheap tool to copy the RFID at home but they all cost way more than just having the dealer program it ya know

@nickb3463 6 жыл бұрын

Doing this now. Left my keys in pants when I washed it. 😬

@jackschissler255 3 жыл бұрын

I will agree, this key switch blade is a stupid design. The key should be separate from the remote. My dads 2018 Chevy Silverado has it separate

@CamaroTime 3 жыл бұрын

Some like it separate and some do not. I have both. LOL Thanks for watching

@drewchainzs8587 5 жыл бұрын

The old key is an integrated circuit that draws power for the transponder from the key fob cr3032 battery, while the new key has a stand alone transponder that is powered from the receiver ring. Should I place the old key near the reviewer ring and try it again that way? I'm at a loss here and it's looking like a trip to Ford for a replacement key and $32 useless key thats only good for unlocking the doors and popping the trunk lol

@CamaroTime 5 жыл бұрын

So this is for a ford?

@miketurksma9135 Жыл бұрын

How can I program a new fob Keeping the key that I have and is programmed already to the car I don't want the switch blade 50.00 to cut blade

@CamaroTime Жыл бұрын

Is it a dangle key?

@miketurksma9135 Жыл бұрын

yes@@CamaroTime

@CamaroTime 9 ай бұрын

Put the key on a small carabiner. Then dangle it on the old fob. Insert and switch on for 3 seconds. Remove the key from ignition. Then immediately swap it over to the new fob , insert and switch on for 3 seconds. That "should" work.

@mikeokizichy 4 жыл бұрын

Hi, The buttons on my FOB crumbled. I have a Fob that is programmed for a different vehicle & switched the key blades. Will this reprogram the Fob to my vehicle? I tried this 2 times, I did not stay in the car so I am wondering if getting out of the car is interupting the cylce or it doesn't work on pre programmed Fob's

@CamaroTime 4 жыл бұрын

Hey there.....Only way it will work with the other is if the numbers on the side of the fob match. if they do not, it will not work. Thanks for watching

@SiriEmerald 4 жыл бұрын

What about if I already have 5 keyfobs programmed. How do I add the "sixth" or more?

@CamaroTime 4 жыл бұрын

Depending on year you can only add so many. Then you have to go to a mechanic and have them cleared before adding more. But here is the easy way to add more kzfaq.info/get/bejne/e9F6aNio3Ne9XX0.html Thanks for watching

@dopeman318 5 жыл бұрын

My new replacement key stopped working like after a week. I ordered another and it did the same. Where did you get your fob?

@CamaroTime 5 жыл бұрын

I bought mine at my local chevy dealer. Thanks for watching

@sharil3645 5 жыл бұрын

I only have one key fob for my chevy Equinox and was thinking about ordering a backup one online. Where can I get the new one laser cut and how much will it cost?

@CamaroTime 5 жыл бұрын

Hello. You can get it cut at almost any hardware store like true value or ace. Also some walmarts do it...….when you order online make certain the numbers on the side match your current one

@vex123 4 жыл бұрын

I only have the valet key. Will this method still work if I buy the key fob and get it cut?

@CamaroTime 4 жыл бұрын

It is supposed to. Thanks for watching

@shauntaylor6949 5 жыл бұрын

I have the new key and it is cut, but my car alarm won't stop going off. Do I need to unhook the battery?

@CamaroTime 5 жыл бұрын

Are you sitting in it with the door shut?

@shauntaylor6949 5 жыл бұрын

@@CamaroTime I am now. It took it a minute, but the alarm did cut off. I am attempting to program the key now.

@jonnsolis8133 4 жыл бұрын

My mom has a 2014 Camaro right now and the key is on a key chain like in the video 1:39 but she used to have a 2012 Camaro with a push button key and she wants to use that key instead for her 2014 , will this method work?

@CamaroTime 4 жыл бұрын

If the numbers on the side of the fob are the same then, yes. Thanks for watching

@uzip627 4 жыл бұрын

Hi, I have the keyless control, but i want to know how can I get the key by itself and the control?

@CamaroTime 4 жыл бұрын

By taking it to your local Chevy?GM dealer. There is still a recall on them. Thanks for watching

@ledoniabryan8658 5 жыл бұрын

Hello, I have a 2015 Chevy Camaro. The dealership only gave me the original key and the fob. They did not give me a spare key. Just the one master key. Does that method work if I purchase the new remote fob? The buttons on my old fob does not work. So I'm left with the key link to the chain.

@CamaroTime 5 жыл бұрын

It should. Have you tried reprogramming the old fob?

@martinez1984eldrick 5 жыл бұрын

@@CamaroTime same has happened to me this past weekend. Now my old key fob doesn't work, I mean it starts the car but the unlock/lock, panic, remote start doesn't work. How do I reprogram it. martinez1984eldrick@gmail.com

@josephowens 5 жыл бұрын

So do you know if this will also remove all other programmed Key Fobs from working with the card as well? Asking because we have lost fob and I don't want the chance of someone finding it and be able to gain access to my car.

@CamaroTime 5 жыл бұрын

Honestly I doubt so. Most of the time that has to be done with a scan tool. A local mechanic should be able to wipe them right out. but before doing so, look up Rick Hendrick Chevrolet in Charlotte NC...….As for the parts counter. And ask them how to do it. They have always done me right...Thank you for watching

@goldieswitzerlox Жыл бұрын

Man.. 2013 camaro 2ls v6 here with this issue. Did everything you said here and still have no button functionality. It did not pair my button functions. Iyiyi.. unless I have to wait exactly 5 seconds each time from "off" to "on" because I turned it off, pulled out, and put back in to then twist to "on" pretty immediately for each set of 10 minutes.. i even did 11 minutes to be safe. I don't have an issue with the security light since the lock Smith tried programming the fob after cutting the key. I then took it to chevy and they tried and failed after 2 hours of waiting. They want $460 total for two fobs straight from them and I'm already out $200 for the fobs I bought and had cut with a program attempt at the lock Smith. This is insane. I dropped $300 on an electric starter which included install and 2 fobs that work perfectly. Wtf why are these mfers RAPING us on simple stupid FUCKSHIT

@CamaroTime Жыл бұрын

Sorry this is happening. Yes, they are trying to rob us blind. That is why I made these videos . To try and help where I can.....Now for the problem at hand. 5 seconds is a guideline only. but I would try not to go past that. It only takes about a second to second and a half to swap keys without even trying to rush. So I have 2 ideas. One, check the batteries. Make sure they are fresh and in correctly. I know, they are. but, just check to be certain. And if that is not it, you will not like the next one. You may have too many keys stored in the system. Especially if it is a used car. In that case you would need to take to a mechanic you trust (not the dealership) and have them clear all the keys out except for the working one and then do the reset.

@goldieswitzerlox Жыл бұрын

@Camaro Time that's the issue. I'm the 3rd owner. It's got 3 keys programmed already. I'll get back to it and get back to ya I can't have this standing over me with its cock out looking down and laughing at me. This is ridiculous. Thanks camaro time.

@pepelepiew2186 4 жыл бұрын

Thank you !

@CamaroTime 4 жыл бұрын

Nope. Thank you......Thanks for watching

@AIC68 5 жыл бұрын

I did the 3 ten minutes thing and ...... now the 2 new keys work but both new fobs don’t work. My old key works again but the old key fob does not. So now can start my car but none of my fobs work ? Would you happen to have any ideas? Any help is greatly appreciated 👍

@CamaroTime 5 жыл бұрын

Do the numbers on the side of the fobs match the original?

@AIC68 5 жыл бұрын

No and I called Chevy on that. They said there is 3 different keys and and they sold me the 2 that don’t work. They are saying I am suppose to get a key kit part number 23366895. Have you heard about that at all?

@shancharan7834 Жыл бұрын

I hope thieves won't be watching this video

@CamaroTime Жыл бұрын

Won't do them any good. Still have to have one that is cut for the ignition. Thanks for watching

@arodd3925 5 жыл бұрын

Does this method works for a 2014 Chevy impala my anti theft deterrent light is on, I replaced the battery because it was no good and tried something similar to this method but I didn't take the key out the ignition during each cycle. Or could it be that I just need another key fob

@CamaroTime 5 жыл бұрын

Hi. It is possible that you need a new fob. But it will not hurt to try this one. I was told you have to remove the key each time that way the computer recognizes that it is repeating the cycle. If you do not take it out, it thinks you are trying to do something else and not program the key. Thanks for watching

@arodd3925 5 жыл бұрын

@@CamaroTime Thanks

@MizDelight 5 жыл бұрын

What if you have keyless entry? I have no place to stick a key to start my car.

@CamaroTime 5 жыл бұрын

@hollabackbych 5 жыл бұрын

3 times with the old key then use the new key? Or with the newly cut key?

@CamaroTime 5 жыл бұрын

3 times with the new key....Thanks for watching

@elargiocisneros6798 4 жыл бұрын

Sir, I just saved $350... Thank you!!!

@CamaroTime 4 жыл бұрын

No sir, thank you. Thanks for watching

@Smalls4Life 6 жыл бұрын

I have 3 keys and 1 working fob, can I program the other 2 fobs without having the key blades cut and just use the danglers?

@CamaroTime 6 жыл бұрын

Hey there. Thanks so much for checking out the video. I must say I am a little confused. Did you mean can you use the three keys with the same fob? If so , yes

@Smalls4Life 6 жыл бұрын

So I have 3 working "keys" 1 programmed fob, I bought 2 spare fobs how do I program the 2 extra fobs?

@Smalls4Life 6 жыл бұрын

The 2 new fobs just have blank blades on them they aren't key cut

@CamaroTime 6 жыл бұрын

You should be able to just hang the fob off of the working key. Switch car on, wait 10 seconds and remove. Do that 3 times and you should be good to go. Just so the fobs are for that vehicle. Do the numbers on the side of the fobs match?

@Smalls4Life 6 жыл бұрын

They have updated numbers on them that replaced previous numbers is what the site said