Рет қаралды 588
Yes IT IS PL-259 and not PL-258!!!
Connector: Amphenol 83-1SP (silver plated)
Adapter: Amphenol 182108S (silver plated)
Cable: Messi & Paoloni Hyperflex 5
The coaxial’s braid MUST BE SOLDERED!!!
See this: www.amphenolrf...
Use ONLY silver plated connectors!
Internet and a lot of stores are full of Chinese crap connectors, make sure you buy well branded connectors.
Use a 40 or 45W soldering iron with temperature regulated to 340 degrees Celcius.
Use 60/40 solder.
UHF connector (PL-258) is acceptable ONLY up to 30MHz due to high losses and it doesn’t maintain the 50 Ohm impedance above 8MHz.
Above 30MHz or always if you can, use Type-N connectors.
Last note: coaxial cable RG-58 IS NOT suitable for transmission!!!
73 enjoy