How to Properly Perform Annual Service and Maintenance on a Central AC System
Рет қаралды 379,612
Step by step instructional video on how to properly service and maintain a central air conditioning outdoor condensing unit and indoor air handling unit.
I used the Venom Pack from Refrigeration Technologies. Available here: amzn.to/3anuSbA
And the NuCalgon Coil Gun with Sprayer, available here: amzn.to/3xhBBgr
What’s in your Veto? Here is mine:
Veto TP-XXL amzn.to/3zX10vg
Milwaukee M18 Blower: amzn.to/46iTo6j
Milwaukee M12 Fuel 1/4" Impact Driver amzn.to/3I9yLfI
Milwaukee PVC cutter: amzn.to/3sbrdUc
Mini Waterproof Storage bin: amzn.to/3yfgsEv
Wiha Allen Keys: amzn.to/33ipGmb
HIKMICRO B20 amzn.to/33iGklx
Furnace Switch amzn.to/31X89PT
Milwaukee Light amzn.to/3I38Lmh
Wagos amzn.to/34QoiaU
Milwaukee Set amzn.to/33vnQOz
Torpedo Level amzn.to/3no1oOk
Crescent set amzn.to/3GtZeV8
Wiha 7 piece set amzn.to/3rkISaK
Milwaukee step bit amzn.to/3I395Bv
Flare wrench amzn.to/3noJZ8s
Ridgid 10” wrench amzn.to/3GvRnqa
Fluke non-contact tester amzn.to/31VQgAQ
Klein drivers amzn.to/3qoe21W
Knipex Wrenches amzn.to/3trzFjS
Klein 11-1 amzn.to/3tpsPLD
12” crescent amzn.to/3A0CZ6S
Gerber Gear Pocket Knife amzn.to/3foaW7I
Yellow Jacket Hand Ratchet amzn.to/3nrDgup
I am on Discord & WhatsApp!
Discord: / discord
WhatsApp Group: chat.whatsapp.com/CHZWtZe4KMG...
Mikey Pipes Uncensored: / @mikeypipesuncensored
New oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
Pipe Doctor & Bosch short sleeve shirts are available in Medium, Large & XL
Minimum donation of $23 is appreciated
Pipe Doctor FlexFit Embroidered Caps
Minimum donation of $37 is appreciated
(If you are international - please add a minimum of $40 for shipping/postage)
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
PayPal is: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Plumbing
80 E Hawthorne Ave
Valley Stream, NY 11580
#CentralAC #Maintenance #MikeyPipes
@PipeDoctor Ай бұрын
Please support this channel and Mikey Pipes and consider the following… Pipe Doctor FlexFit Embroidered Caps Minimum donation of $37 is appreciated (If you are international - please add a minimum of $40 for shipping/postage) Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v Sticker Requests: Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com Name Address City, State, Zip Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe. PayPal is: office@pipedoc.net Venmo: @PipeDoctor CashApp: $mikeypipesny Zelle: mike@mikeypipes.com Want to send a love letter, note or gift? Our mailing address is: Mikey Pipes, Inc. 1010 Central Avenue Woodmere, NY 11598
@fredrickkehoe9817 7 ай бұрын
November 4. 2023. Great video. I spent a few years doing HVAC for the NYC Transit but that was years ago. So watching your video brought a lot back to me. Thank you.
@PipeDoctor 7 ай бұрын
Glad you enjoyed it!
@1unkn0wn Жыл бұрын
Wow, thank you. I have had "techs" out a few times to look over my system and it's always been the same thing. A couple visual checks, a warning that the system will eventually need to be replaced (duh) and off they go. Thus, I have started doing it myself. This gives me an even better idea of what I should be looking for.
@kennethshamblin9613 Жыл бұрын
I just had the same problem and they charge too much for b.s
@marcusfitzgerald59 Жыл бұрын
@@kennethshamblin9613 it's a business
@fldave612 Жыл бұрын
I've gotten that "It needs to be replaced.", or "It can't be repaired." lines of manure a lot from HVAC companies. It seems to be especially prevalent if you have a unit made by a different MFG than the brand name on their van, a lot of them act like they don't know how to, or don't want to work a different brand.
@samuelg3586 Жыл бұрын
A real maintenance and evaporator/condenser coil cleaning will cost around $700.
@samuelg3586 Жыл бұрын
@@fldave612 why do you even call us to check your AC to begin with??
@richardtabloff1773 Жыл бұрын
As a service company owner for over 45 years I can tell by your attention to detail you are the company owner. Well done, teach your techs to be as good as you are. Well done.
@baggerdet4590 2 жыл бұрын
Rheem designed them to take the panels off with one screw a piece,water pressure does a fine job
@michaelmaclachlan2152 2 жыл бұрын
Thanks for the great tips, Especially like the outdoor sticker and thorough cleaning cheers.
@fxrvw7052 Жыл бұрын
Appreciate you taking us along on your service call! New sub 👍
@Aepek 2 жыл бұрын
Nicely done and wish everyone was that respectful, polite, and caring w/ equipment AND PROPERTY when doing work! Really really awesome Mike and train your crews well too👍🏻 Cheers✌🏻
@ekeith626 Жыл бұрын
What an awesome repairman!!! Your video instructions is very much appreciated.
@wahidstx Жыл бұрын
Wow, only if I've ever seen another AC Technician doing this thorough job, Great Work!
@shamusa943 Жыл бұрын
Mikey, you always do such nice work. Wish you were in my part of the country so I could call you for service. Thanks for these videos. I always learn something new from you.
@patrickkulakowski9263 2 жыл бұрын
Saint Mike - I have been busy and haven't watched many of your videos lately. Good to be back watching and learning again! Hope all is well!
@brandonneal8477 Жыл бұрын
This video was very thorough.
@freedomhigh2160 Жыл бұрын
Great job Mikey, I’d feel very comfortable hiring you. We need more honest people like you ! Keep up the good work, you ARE appreciated more than you know.
@waynecostanza2280 2 жыл бұрын
The Doctor is in the house. Just simply can’t do better! Nice Job Mike.
@dandydonslife9869 9 ай бұрын
Really good explanation on how to clean coils, ordered gun and cleaner, plan to do it on mine, thanks.
@Mrs.Green23 Жыл бұрын
More service men need to be a proper as you. Your on point with everything!! Great work great video
@jacoblake2929 9 ай бұрын
Awesome video & tips!!! Thank you.
@hvacblogger Жыл бұрын
Great video Mikey! 👍🏼
@kg4muc 2 жыл бұрын
Totally agree with the refrigerant pressure and temp checks. Keeping a sealed system sealed is best in cases where no leaks are suspected Happy Memorial Day
@markmcelmeel7850 2 жыл бұрын
Only caveat to that (for me personally) is I like to really thoroughly check those types of things on my first visit so I have baseline figures. Seen plenty of situations down here in south Florida where customer has 20 plus degrees of subcooling and a flooded compressor from being overcharged. So it’s my policy to get baseline info like that on my first visit
@hvacguy364 2 жыл бұрын
Yeah I use smart probes and a core depressor. I like to dial in the subcooling. I just like to give the customer the optimal running conditions.
@elliecrawford2392 2 жыл бұрын
This looks incredible!!! ❤
@davebrunson125 2 жыл бұрын
I liked the video when you talked about gauges, I totally agree. The way you talk to your customers is great. I noticed you didn't check or clean the evaps. I also noticed the drain line in the attic wasn't vented properly after the P-trap. It doesn't mean much in low humidity areas but high humidity a proper drain vent will help prevent overflow and help with cooling. After the p-trap not before
@frankrizzo1433 Жыл бұрын
Great channel, former resident of Lynbrook. Wish I knew about you when I lived in Lynbrook!
@rosehudson9437 2 жыл бұрын
You have a amazing personality!🐶❤️💙❤️💙❤️
@jhhawaii8 2 жыл бұрын
Textbook! Pretty much the same way I would do things. Good job, sir!
@lilramborambo4399 Жыл бұрын
Hey Mr Pipes, your pipes are pipen... Great video.... Now I know how to tell if my check ups are being done correctly...😁👍💛
@wiljulia2 Жыл бұрын
Great job! I had my service guy to stop by again after I felt he was in and out of my house. I hope ST PETE A/C gives a heads up next time they do a “MAINTENANCE” service on my unit. This kind of clips helps tremendously for those who don’t have a clue of is proper and honest service Ill give you two thumps up on your video!
@Jason-pq5vg 2 жыл бұрын
Very respectful!!! Awesome job!!
@coled5090 Жыл бұрын
Nice video. I like to use automotive wax on the paint for the condensing unit, and it keeps it looking glossy new and helps prevent rusting.
@Pheseg 11 ай бұрын
Nice video, thank you for posting
@nickdaws4493 Жыл бұрын
Thank you. Very instructive
@jamiescherer4018 2 жыл бұрын
Remarkable job !! Thank you
@jeanclaudevandam4974 Жыл бұрын
I love the label instead of a sharpie. Class.
@brianreip411 Жыл бұрын
😂 I love it. " If you ain't testing, your guessing"
@npolite22 2 жыл бұрын
Leaving that dryer filter out there in the open is asking for a premature failure. As you say install that out of the elements. I'll be sure to keep that in mind on my new install.
@Xdonald331 2 жыл бұрын
Good video. I like the attention to detail. Have you considered taking static pressure readings as well? Around here (Texas) there's a boatload of crap ductwork. Only suggestion is drop the jewelry- it's a great way to discover Arc welding! Stay safe and work proud!
@jimbonito9810 Жыл бұрын
You have a Kick ass business , deservedly so ... Congrats Mikey
@zacharypalczynski8450 Жыл бұрын
Great work , I would have taken panels off just because it’s the easiest Rheem/Ruud to do so but you’re my fav my guy
@douglasbaker9663 Жыл бұрын
Gods bless you for labeling. It's not my house but IDK, it's a habit I wish more of us would do.
@donny5417 Жыл бұрын
Nice work and I love the shirt!
@izcalirs 10 ай бұрын
Thank you Mike!
@guanako503tyle6 Жыл бұрын
Thanks for the info nice and neat professional work 🔥💯👏
@pa2k582 2 жыл бұрын
Your voice makes me want to sleep, great hypnotist
@Eddy63 2 жыл бұрын
Professional job as always ... Thx ...
@alayahcoleman9993 2 жыл бұрын
this is pleasant time and your pleasent post ! best
@MarcBrouwer1 Ай бұрын
Thank you for the great video!!!
@PipeDoctor Ай бұрын
Glad you liked it!
@401BAM 8 ай бұрын
Thanks for the info! Much appreciated
@PipeDoctor 8 ай бұрын
Glad it was helpful!
@zacharybinette9103 Жыл бұрын
I’m glad someone agrees with me I never hook up gauges unless there’s a problem last time I did I got a really bad burn because the schrader stuck and rather than dump 9lbs of 410a into the atmosphere I quickly reattached
@MrRmelim Жыл бұрын
Great job. Very informative. I like your shirt.
@angelo12211989 Жыл бұрын
Good video, certainly a better maintenance than most techs. My recommendation with rheem systems is that you can remove the center screw outside of the condenser, pull the coil covers up and out and the coil can be exposed once ready to rinse.
@ncooty Жыл бұрын
Thanks very much for letting us look over your shoulder. @26:30: You said, "You get what you pay for." Unfortunately, that's rarely true. You definitely pay for what you get, so if you're not paying much, you're not getting much. However, paying more doesn't mean you're getting more.
@josephwhitaker9365 2 жыл бұрын
I like the fact that you take the time to explain the small stuff (condenser air intake) because it really separates the professionals from the perpetrators. Excellent video as always.
@jimreilly917 11 ай бұрын
😂perpetrators. Perfect term for eyeballers just out for a buck.
@TheNotoriousNemo 2 жыл бұрын
Good video I need to do this
@amandahopper1882 2 жыл бұрын
I appreciate your Post 👏 👏 👏
@lingantonetti3744 Жыл бұрын
Good video good work brother!!!
@sepemail5849 Жыл бұрын
Love you caught yourself two seconds after by eyes and brain processed the gold chain you are wearing. Yes, doing electrical work I bagged any rings or wrist jewelry long ago, not worth the risk or loss taking it off when working in obvious risk situations.
@ronaldhooutube Жыл бұрын
I agree with the low out door abeint temperature not being proper for cooling maintenance, but it is what it is. to many to get done during the season I do my best to be certain system will perform well.
@slip0n0fall 2 жыл бұрын
Mikey it's not a true inrush measurement feature but the Min/Max feature is invaluable for troubleshooting (and capturing max current in this case).
@demitriceventers4040 Жыл бұрын
I wish your company were in Houston, Texas. Great job Sir!
@ceeweedsl Жыл бұрын
I've got a place in Houston my mother lives in. Worst place I've seen to get work done. Not 1 in 20 guys knows AND cares what he's doing. A job well done around here is one where the check cashed. The service culture of this town is ugly. I guess it reflects the overall. Watch out for the condensate drain plumbing. There is a local belief that traps are unnecessary. Service guys cut them out if there is one, leave the vent and you have the whole system sucking hot dirty attic air plus the condensate issues it causes as well. Works fine! More service calls, more money.
@myrasonger8423 2 жыл бұрын
Just splendid 🙆
@jorgegarcia5283 Жыл бұрын
Nice job. It would have been nice to show a before and after temp difference with the temp gun.
@johnwalter9696 Жыл бұрын
I live in Florida. My AC unit is from '81 still blows as cold as it should, according to a tech who came. for $9 dollar .95 cent lol. refrigerant and dirty coils seem to be the biggest concern. 90% on the refrigerant. tomorrow I clean the coils and use a cheap HD filter, which I change monthly. wish me luck great video thanks for sharing
@idacarls851 2 жыл бұрын
Great view and post
@openyuheyeby8674 2 жыл бұрын
This guy's replies to comments are hilarious 😂 😂
@jcaleca60 2 жыл бұрын
Nice job
@TheMax13542 2 жыл бұрын
pretty cool. just a tip though, go down to the hardware store and get one of those 3-4ft hose wands then unthread the end off and put the quick connect adapter from your coil gun on that bad boy, no more bending over like a hunch back to wash out a coil. not a big deal if you only do a couple a day but if you ever do commercial buildings with over a dozen systems on the roof it'll change ur life, also helps you keep ur boots dry.
@marleeharrell5570 2 жыл бұрын
really courageous 💖
@sariyahmaxwell6763 2 жыл бұрын
Fantastic Post
@lingantonetti3744 Жыл бұрын
I learned a lot here
@johnspanos3862 Жыл бұрын
Great channel! Can you do a maintenance video on the Bosch 2.0 inverter one day?
@boilerman2540 2 жыл бұрын
Mikey, I do all the same- with new customers I look for test holes in the duct work to see if static pressure was checked- if not I will check which help with other problems- I do the same with boilers here in Maryland you would be surprised how many boilers were installed and combustion never set!
@boilerman2540 2 жыл бұрын
Yes that would be a great one! Great job and have a great rest of the holiday weekend!
@aarontyrrell2931 Жыл бұрын
Nice video!!
@TheGregWallace Жыл бұрын
Comment.....the problem is....finding someone like yourself to do the job properly like you do.....There are to many jacklegs wanting quick money. Keep up the good work.
@kittysch2 2 жыл бұрын
Hey Mr. Pipes, would it be OK to apply a screen on top of the fan grill? To prevent leaves and twigs?
@kimberlymarvin6368 2 жыл бұрын
One of Thee Best!
@lotusgardener Жыл бұрын
Do you recommend installing a soft start on the condenser for power savings/longevity increase?
@addisynhull2165 2 жыл бұрын
Great! Have considered Master Class
@billm2516 Жыл бұрын
Great video. I clean our outside unit every spring along with the outdoor unit for our mini split system. Is the green control box on the boiler from TACO? It looks a lot like one of their iWorks systems.
@oncalldev 2 жыл бұрын
You read my mind with this video. Just turned on the Central AC for the first time this season to see if it's ready for some upcoming 90+ degree days. I haven't had it looked at by a pro for about 4 years. Might be time. Thanks for the info.
@STONE69_ Жыл бұрын
Clean your coils/fins yearly and change your furnace filter, that will prolong the life of the unit. No need to pay for half azzed work.
@officerkrupke4966 Жыл бұрын
If its four years since its last service, make sure to change outdoor dual capacitor, its due to fail.
@llawrence-smith109 8 ай бұрын
Are you in Florida? I love how you explained and showed us step by step. I need your service ASAP!
@PipeDoctor Ай бұрын
Central Florida, Orlando area
@LTSRIDE24 Жыл бұрын
Great video & I learned a lot that I didn't know. I would love to see a video on comparing mobile ac units vs window units. Once again, thanks for the knowledge share.
@katysalter2021 2 жыл бұрын
So sweet💫,I like your boldness =)
@debndave4871 2 жыл бұрын
As a retired maintenance supervisor in a hospital, routine preventative maintenance is crucial for equipment reliability and operation.
@murkyturkey5238 2 жыл бұрын
Very very important, especially at a hospital. Definitely want to avoid problems there
@williamserver4332 Жыл бұрын
Take amp draw after rinsing with water then after coil cleaner. There is no difference. Great video
@JamesJohnson-em9pc Жыл бұрын
Looks good, we take the covers off around the unit, you would be surprise how much is being trapped between the coil and cover if not removed. We also check static pressure on blower and capacitor on indoor unit. The tablets should have been placed in the drain pan, they do very little against the coil.
@KENFEDOR22 Жыл бұрын
Agreed, I remove the top cover (fan still attached) to access the entire coil assembly. I tried once with just removing the fan assembly but couldn't really clean the top of the coils. Obviously, take caution when reinserting the top cover as the fins are vulnerable.
@hannahpowell9455 2 жыл бұрын
great! Have considered Master Class
@Daddybignuts Жыл бұрын
Wise words
@peterk7981 2 жыл бұрын
What coil cleaner do you use for the black coated fins on condensers? I've seen some cleaners eat away the black finish. Thanks!
@nicholasfigge1500 10 ай бұрын
Great Job Brother, Did Above and Beyond Most That return has restriction keep that Aprilaire for intake grill (which technically isn’t right for 1 and not through out house) but yah keep and maybe or nothing for intake if so fiberglass low merv. If that’s 14” flex max cfm is 1000 for 400 cfm per ton, needing 1200 cfm on a 3 ton. The return is short causing freeze. System Balance is Hard and I had to take multiple classes to somewhat know then calculate. Best rule of thumb is pulling blower door off. If it’s hard it’s restricted, and always make sure all supply’s are open.
@nicholasfigge1500 10 ай бұрын
No Prob technically 16” is 1000cfm 14”is 700cfm
@nicholasfigge1500 10 ай бұрын
On Job Like that I just cut in a return grill near furnace for easy fix
@markmcelmeel7850 2 жыл бұрын
I have never known Rheem to use those pointed blades. It’s very interesting that one of the units uses a two prop set up and the other one uses a 3 prop with the angled scythe blades. I know the higher end ones may use a different blade set up but these look relatively the same in terms of efficiency. Just found that interesting. Good job getting those units sparkling Mikey
@andrewludwig9251 2 жыл бұрын
The Rheem 3 ton uses the 3 point swept blades, the 2 ton only uses the 2 prop blade. I guess the 2 ton doesn't need as much need as much air across the condensing coil.
@markmcelmeel7850 2 жыл бұрын
@@andrewludwig9251 so weird cause I install a bunch of Rheem equipment (a lot of 3-4-5 ton 14/16 SEER) and have never noticed. I love the look of the scythe blades
@andrewludwig9251 2 жыл бұрын
@@markmcelmeel7850believe it or not, a friend of mine from high school was actually on the design team that developed the swept fan blades. They are pretty cool.
@murkyturkey5238 2 жыл бұрын
@@andrewludwig9251 he’s an engineer? That’s impressive
@andrewludwig9251 2 жыл бұрын
@@murkyturkey5238 He was, he works on huge 50 ton walk in units now.
@relaymy Жыл бұрын
Cool t-shirt!
@rosehunt6158 2 жыл бұрын
I Love that !!❤💜 & OMFG YOU ARE AN Superb !!😍😍😍
@jesses9553 2 жыл бұрын
The warm air exiting the outdoor unit-is this air warm due to the refrigerant changing it's state? I have read others comment that the warm, indoor air, is "dumped" outside. Still learning the basics.
@frankgall6 2 жыл бұрын
Love what you do, I’m the same way. I too have a FLIR one in my bag as well as a real one for my blower door energy assessments. Only thing I would have done was take static or use my trueflow to check airflow to make sure the second filter wasn’t an issue. I was yelling at the screen when you didn’t sell him float switches!!! Lol keep up the great work. 👍🏻🙏
@pvfd304 Жыл бұрын
which thermal imager are you guys using and would recommend?
@frankgall6 Жыл бұрын
I I have one of the basic model FLIR for the phone in my bag and a FLIR E5 for audits.
@pvfd304 Жыл бұрын
@@frankgall6 I'm an electrician for a locality and we had a call for the water heater at the firehouse that was blowing fuses. After several visits with normal amp reading, I got the TIC off the engine and found a bad connection on the disconnect that was heating up under load. I want to add one to my truck.
@frankgall6 Жыл бұрын
Yea the FLIR one pro I think it’s called. The one that works w the phone should be plenty good for that. They are surprisingly good
@ranger178 2 жыл бұрын
do you do cleaner on the coil of inside unit, or do you figure they are constantly rinsed off?
@frankmangieri2077 Жыл бұрын
Hey mikey, so should the outdoor condenser dry for after it's rinsed off? or just power it back up?same question for the interior evaporator after the evap + product is applied?
@docphi Жыл бұрын
how often do you use the Pan treat tabs in the condensate pan?
@garymoore1600 Жыл бұрын
Great video! New tech here. Is there a reason you didn’t clean ID coil as well? Great job with the OD coils I can’t get them that clean I will try it how you showed
@TheOriginalSpawn Жыл бұрын
Great Video 🫡:..🔥💯👌🏽
@TheOriginalSpawn Жыл бұрын
Just got a SuB
@CristianGarcia-yl5eg Жыл бұрын
This video was excellent man, i recently got hired to be a maintenance technician and I didn’t have an idea what did they do but your video provided a lot of rich information and that customer interaction was excellent!! Thanks for making this video man
How To Home
Рет қаралды 3 МЛН
How To Home
Рет қаралды 602 М.
Mikey Pipes - Pipe Doctor Plumbing & Heating & Air
Рет қаралды 12 М.
ServiceTitan Elite Trades Championship Series
Рет қаралды 42 М.
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 34 МЛН
Академия здоровья
Рет қаралды 2 МЛН