How to Put a Quilt on a Frame and Quilt with a Home Sewing Machine

Рет қаралды 32,712

Күн бұрын

leahday.com/pages/janome-1600... Learn how to put a quilt on a frame and begin frame quilting using your home sewing machine.
This quilting tutorial features a Q-Zone Hoop Frame with a Janome 1600 home sewing machine. Yep, you can quilt on a frame with a home machine! I share a lot of tips for getting your rails to the right height at the beginning of this video so jump to time: 14:10 if you want to get straight to quilting.
#sewingmachine #janome #quiltingforbeginners
I'm no longer a Janome dealer, but have provided links to this sewing machine and compatible presser feet for quilting. Note - Affiliate links are posted here to support my channel at no additional cost to you.
Janome 1600 Sewing Machine - amzn.to/3MmxnLq
Additional 1600 Bobbins - amzn.to/3FHWJjc
Janome 1600 1/4-inch Patchwork Piecing Foot - amzn.to/3u5MEK8
Janome 1600 Walking Foot - amzn.to/3EHObIq
Janome 1600 Darning Foot - BEST DARNING FOOT EVER - amzn.to/3FGHc37
Janome 1600 Frame and Ruler Foot Base to fit Darning Foot linked above - amzn.to/47iLslf
More KZfaq Quilting Videos on the Janome 1600 Sewing Machine:
Unboxing Janome 1600 Sewing Machine - • Janome 1600P Sewing Ma...
Free Motion Quilting on the Janome 1600 - • Free Motion Quilting f...
Ruler Quilting on the Janome 1600 - • Beginner Ruler Quiltin...
Walking Foot Quilting on the Janome 1600 - • Begin Walking Foot Qui...
Quilt Block Piecing - • Quilt Block Piecing an...
Where and How to Oil the Janome 1600 - • Janome 1600: Where and...
How to use the Needle Threader - • How To Use A Needle Th...
Quilting with the Janome 1600 on a Frame - • How to Put a Quilt on ...
Other sewing tools and materials in this video are available on my website:
My favorite scissors - leahday.com/scissors
Isacord Thread for quilting - leahday.com/isacord
Aurifil Thread for piecing - leahday.com/aurifil
Q-Zone Hoop Frame - leahday.com/products/grace-q-...
Speed Controller - leahday.com/products/grace-sp...
Sunshine Quilt in the Background - leahday.com/products/machine-...
Jump ahead to the part of this quilting tutorial you most want to see:
00:00 We're quilting on a frame with a home machine!
01:59 How to put a sewing machine on the Q-Zone Hoop Frame
05:06 Make sure to lower your rails to the right height!
07:41 How to put your quilt on a Q-Zone Hoop Frame
10:49 How tight should a quilt feel on a quilting frame?
13:20 How to adjust your handlebars
14:07 To begin quilting - Bring up your bobbin thread
15:22 Common beginner mistakes - that can cause needle breaks!
16:40 Quilting on a frame is FAST!
18:24 How to break thread and secure your thread tails
20:06 Janome Convertible Darning Foot with Frame Foot Set
22:40 How to check your tension when quilting on a frame
24:54 Do we check bobbin tension? No
25:29 Many advantages to using the Janome 1600 on your quilting frame

Пікірлер: 125

@faviolamartinezsewdigitizing 3 жыл бұрын

Even if a person doesn't own the Q zone frame, this is a great tutorial on free motion. Thank you!

@LeahDay 3 жыл бұрын

Thank you so much!

@candygrove4268 3 жыл бұрын

I have completed more quilts with my Qzone hoop than ever before. No sending them out to have them quilted or pulling big quilts through the machine. So worth the investment and learning curve. Happy you are back.

@bikentrike 3 жыл бұрын

What machine are you using?

@LeahDay 3 жыл бұрын

Thank you for sharing Candy!

@candygrove4268 3 жыл бұрын

@@bikentrike I am using a brother 1500s.

@bikentrike 3 жыл бұрын

Thank you Carol. I have a Juki TL-18QVP which is about the same specs as your Brother and Leah's Janome 1600. Another question if I may. What kind of quilting do you do with your Quest frame and do you feel limited for quilting space? I'm really intrigued by this frame.

@SaraNash 3 жыл бұрын

@@candygrove4268 If you don't mind, what foot are you using with that machine? I have a similar machine, and I'm not finding too many choices. I'd love to have a convertible darning foot like in the video.

@belyndamulloy33 3 жыл бұрын

Love the machine and frame. Thank you for the tutorials. Really glad you are back.

@nitahenderson4298 3 жыл бұрын

Leah, thanknyou for sharing your knowledge. Your videos are the best tutorials for longarming and free motion quilting out there. Keeo up the good work.

@conniepeterson3004 3 жыл бұрын

I have been contemplating this frame for a while now! I have done so many quilts this year.... sit down FMQ on my Juki 2010Q.... This frame looks wonderful! Thanks for the video Leah!

@janetruiz3372 3 жыл бұрын

Such an awesome video. I have been debating getting this frame but after watching this video I am hooked and just ordered it. Great explanations and many of my questions answered. Can't wait to use it . Thank you for a great video!

@SaraNash 3 жыл бұрын

Bookmarked this one! It will be super helpful as I tackle the QZone free motion learning curve. Thank you!

@wandab3843 3 жыл бұрын

Leah is an incredible teacher.

@bikentrike 3 жыл бұрын

This is pretty amazing! I ordered our Q-Zone Hoop Frame Pro, Qnique 15R, Luminous Light Bar, and a few accessories from Leah on Monday Sept. 14 and 6 boxes arrived on our porch this morning Sept 17. Got it partially put together already.

@LeahDay 3 жыл бұрын

That is awesome! Thank you for sharing Jim. Let me know if you need any help!

@MsDjvinson 3 жыл бұрын

Thank you for this video really great teaching.

@jessicatexasjh 2 жыл бұрын

One of the best videos I've seen.

@LeahDay 2 жыл бұрын

Thank you!

@lorrainecornwell6232 3 жыл бұрын

I love my Janice 1600p! It is a fabulous workhorse and the speed is wonderful. My dad made me a frame (very basic) but really works. I can see how this frame would be great for home machines. I have not quilted for a while, I think it might be good to get it out again. Great teacher Leah!

@lorrainecornwell6232 3 жыл бұрын

Janice! Dam autocorrect! Janome 🙃

@LeahDay 3 жыл бұрын

LOL! That made me chuckle. Thank you for sharing Lorraine!

@2Peachcobler 3 жыл бұрын

Thank you for this video. I've seen this frame on another video but they didn't go into all the wonderful detail you did. This has given me something to think about. You always do such great tutorials. Thanks!

@LeahDay 3 жыл бұрын

Wonderful! I'm so happy you found this helpful!

@PatsyB 2 жыл бұрын

I did buy this frame. Quilting can be done but it is a job. Really takes the joy out of quilting. You are just glad its over. The maneuvering of the quilt is not what I had ever imagined. Baby quilts are a breeze. Quilts that are larger are very difficult. I have been quilting for 51 years so I am not a newbie. Maybe you will have better luck than me.

@LeahDay 2 жыл бұрын

Thank you for sharing your experience. Quilting a big quilt is challenging whether you're quilting in zones on a Hoop Frame or spreading it out on a table and navigating the bulk through the arm of the machine. And while you're not a new quilter, that was your first quilt on a Hoop Frame, so it's going to feel like a totally new experience. Give yourself more time to experiment and learn the process and you may find it more enjoyable.

@dimples6596 8 күн бұрын

Curious to know if your feelings about the frame have changed. Thanks!

@cyclist20 3 жыл бұрын

I bought this frame at the Quilt festival in Birmingham a couple of years ago as it was so compact. It was the entry drug. After using a variety of machines on it I got frustrated that the harp space was too small on the machine to use the whole frame space. That lead to the eventual purchase of my Bernia Q20 ( which I got ex demo) on it with great effect and can now use the whole available frame space. You can now buy a Q16 from Bernia which is new and probably cheaper but be warned - this frame answers so many problems for the quilter who wants the convenience of size ,flexibility it makes the whole quilting process even more addictive-as if that were possible...

@LeahDay 3 жыл бұрын

LOL! I completely agree with you that this is a entry drug! I think that's the case for any frame - to want to go bigger and have as much space to play as possible. Thank you for sharing your experience Jessica.

@frankfrank6541 Жыл бұрын

Thank you.

@stingaw4142 3 жыл бұрын

Thankyou so much for this video. I have a Janome 1600P on a Grace Pinnacle frame. I bought this second hand. I have the sure stitch regulator however I was having trouble with tension. I was told that everytime I change the type of thread or fill the bobbin I have to check the bobbin tension using the yoyo test that I have seen you do. I am confused as to now know what to do. I seem to have the tension correct and even though I check the tension each time I fill the bobbin I don't seem to need to change the tension. Also I have bought Isocord thread now and that seems to work well also. Thank you so much for your videos they are great.

@LeahDay 3 жыл бұрын

I don't typically check my bobbin tension with each bobbin change. I check and set it once with the thread I'm using and then I don't have to adjust it again. If there are tension adjustments needed, I change the top tension dial.

@andraebanks 3 жыл бұрын

I am a little excited because I am thinking about purchasing the Qzone Hoop Frame with the Qnique 19 this month.

@LeahDay 3 жыл бұрын

Awesome! Let me know if you have specific questions you need help with!

@andraebanks 3 жыл бұрын

@@LeahDay it's one thing I'm not sure of, does it come with the leader cloth and ruler foot? I know I have to purchase the ruler base, back handle and the laser light.

@LeahDay 3 жыл бұрын

@@andraebanks If you get a Hoop Frame Pro, it will come with leader cloth. To get a Ruler Foot, you'll need the 3 Piece Hopping Foot Set - leahday.com/products/3-piece-hopping-foot-set I will have a special in late October 2020 with this included with Qnique Longarms. Just make sure to check out the site after the 20th.

@learntocrochet1 3 жыл бұрын

I've seen people use a vintage singer in this manner. Either a 201 (which is a little more difficult to change the bobbin) or a 15-91.

@lensdiva 2 жыл бұрын

Leah, I’m really struggling with the whole frame thing. It’s like it’s a totally different machine and doesn’t do anything it did before. I think fabric tension might be part of the issue, what are your machine settings? What’s your favorite thread? And what size needle do you prefer?

@PatsyB 3 жыл бұрын

Would you show changing a bobbin on a regular domestic machine on a longarm I have a Juki 2200 mini

@gingerlynn6968 3 жыл бұрын

I love the Janome 1600 and looking at the Grace Hoop frame, but curious to know whether pantographs work with domestic machines on a frame or not. Maybe I'm not using the correct search terms to locate the answer. My FMQ is improving with practice but curious to use pantographs. Thanks so much for all your videos and great teaching skills and knowledge - I have learned so much from you.

@LeahDay 3 жыл бұрын

Yes! You can quilt pantographs on a home machine on a frame like this. You are limited on the height of the design based on the size of the machine. I've updated my pantographs to work well for this now and you can find them here - leahday.com/products/longarm-pantograph-quilting-designs

@MrsGraphiteGal 3 жыл бұрын

Hi Leah, I've considered getting a frame because I have arthritis in my neck and shoulders so currently I use a home embroidery machine, the drawback is being able to line up design's and the hoop area is only 360x240mm. Just wondering how this compares to normal fmq where you move the quilt which I can't do. Unfortunately I am 100 miles away from nearest dealership.

@LeslieIRoman 3 жыл бұрын

Hello. I am not a good free motion quilter. Can I use a quilting program with the Janome 1600?

@dianahurst6377 3 жыл бұрын

Leah can you put in your description at the top exactly your set up with the accessories. I have the same machine and this is exactly what I have been looking for. I just want to make sure I get all the optional items you have in your video so I can start right away.

@LeahDay 3 жыл бұрын

Done! In this video I'm just using a Hoop Frame, Convertible Darning Foot, and Frame Quilting Foot Set. Later I added a Sure Stitch Regulator and it really helps with keeping your stitches the same size, but it's not required from the beginning.

@Chriscreations123 3 жыл бұрын

Hi Leah thank you for this very good instruction on this Janome 1600 can you use robotics on this frame and machine?

@LeahDay 3 жыл бұрын

Yep! It is compatible with QCT5 and I plan to add it soon!

@Chriscreations123 3 жыл бұрын

@@LeahDay Thank you it is on my wish list.

@glendadaly9516 3 жыл бұрын

What size machine throat would you need to use this frame ? Or does it work on any machine ?

@LeahDay 3 жыл бұрын

You can use any machine, but a bigger harp space will make you happier. The Janome 1600 has a 9 inch harp space, which translates into around 5-6 inches of quiltable space in this frame.

@cecilialopatofsky1063 Жыл бұрын

Where can I purchase a convertible foot set

@jackietucker8942 3 жыл бұрын

How would this framework with a Singer 301A or 401A. Appears that the frame only fits with machines with large throats.

@LeahDay 3 жыл бұрын

It will work, but with a smaller machine, you will have very little room to quilt in. The bigger machine, the more space you will have for quilting.

@jodisuntych8748 3 жыл бұрын

Thank you for this video. I have had my eye on this frame for a while. Do you know anyone who has put a Pfaff Expression 4.2 on this frame? If so, have they had any issues with it? I am so tempted to take the plunge & make the investment. Love all your videos!

@LeahDay 3 жыл бұрын

Yes, I have had many quilters with this machine on this frame. The only issue with Pfaff Expressions is they have a lot of settings for the foot height and you'll need to fiddle with that a bit until you find the perfect placement. That's the case for quilting on a frame or with the machine in a table - I learned those Pfaffs can be tricky several years ago.

@jodisuntych8748 3 жыл бұрын

Leah Day Thanks for the advice.

@outdoorwreck347 Жыл бұрын

I’m not sure if I missed it in the video or not. What stitch length do you use when using the frame? Do you set it at zero like free motion and did you put the feed dogs down? Also I have the same machine except DB so no thread cutter. At the end I have issues with getting the bobbin thread up to bury the threads. What’s the easiest way? Thank you for the great video.

@LeahDay Жыл бұрын

You can use the same settings you use for free motion quilting. So for me that is stitch length 0, but no, I don't drop my feed dogs. It's up to you - if you drop your feed dogs for free motion quilting on your machine try it and see if that works well. You'll need to experiment with settings until you find the best method. As for pulling up thread, try taking one single stitch using the Needle up / Down button so you have a clean complete stitch. Then it should be easier to pull up your thread tail.

@jamifaris7808 3 жыл бұрын

Will the Janome Memory Craft Horizon 8200 QCP work with this frame?

@LeahDay 3 жыл бұрын

Yes, most definitely! I plan to move one to this frame in a few months.

@TrixieScalf05 3 жыл бұрын

@Leah Day -- is "too tight" also the reason that my needle keeps breaking? HELP!

@LeahDay 3 жыл бұрын

Probably not. The main reason for needle breaks is pulling the machine around and not giving it gas (getting the needle to move). Try moving the carriage a LOT more slowly. Much slower than you think and run the machine at a slightly faster than you think speed.

@lavenderlaceladylavenderla5420 3 жыл бұрын

What foot do you use. I currently have a spring loaded free motion foot on mine. I feel I get a bit too much bounce.

@LeahDay 3 жыл бұрын

I love this foot and it comes in many different types so we can make sure you get the right one for your machine - leahday.com/products/convertible-darning-foot-kit This foot is stationary and has a spring so you can adjust the height to be perfect for your quilt!

@petmomful2260 3 жыл бұрын

Thank you, Leah. I am looking at the Cutie frame. Do you find that using a frame, as opposed to sitting at a midarm, is easier on the neck and shoulders? I cannot quilt as much as I want on my sit-down midarm, because I have a bad neck. I have heard you mention in one of your videos that you sometimes have neck pain. Then I would also have to get a ruler work table for my machine.

@LeahDay 3 жыл бұрын

Yes, I do find this is much much easier on my back and neck. I would advise setting your frame up so you can stand and quilt and have it quite high so you don't tend to crane your neck over at an awkward angle. You will need to use a machine compatible with a stitch regulator in order to do this, but it definitely makes things much much easier!

@petmomful2260 3 жыл бұрын

@@LeahDay Thank you very much. I will try this.

@petmomful2260 3 жыл бұрын

@@LeahDay Why do I need a machine compatible with a stitch regulator in order to stand? My machine is a Tiara, and it has a stitch regulator, that little TruStitch hockey puck type. My husband is making me a ruler table that will fit on the Cutie so I can use it. Do you think that will work? I cannot afford a new machine, and my Tiara works very well.

@63Kelsey Жыл бұрын

What is best the Qzone hoop frame or the Grace Cutie frame?

@LeahDay Жыл бұрын

Actually it's the Continuum II Frame! If you want the greatest longevity and a frame that will grow with you as your needs change, go with the Continuum. If it's a choice between the Q-Zone and Cutie, go with the Q-Zone. Just keep in mind that the way these hoop frames are designed, you will end up spending more time with every advance. More time fiddling with the quilt means less time quilting - something most quilters find frustrating!

@Mosshikes 2 жыл бұрын

I just got my new grace qzone queen frame, and after assembly discovered that I have to either purchase or make the leader cloth! The leader cloth kit from the Grace Company is a bit pricey ($190) for my queen qzone, so Im thinking about buying muslin and making my own. Do you have any experience with making the leader cloth(s)? Is there a distinct advantage to buying the kit from Grace that makes it worth the extra cost?

@LeahDay 2 жыл бұрын

Yep, this is part of the reason I don't carry that frame - because there are a lot of hidden costs that can sneak up on you. I think it's worth it to purchase the leader cloth. It's made of thick, durable material, it comes with velcro to attach it to your frame, and I've been using mine for years and never had a problem with it. We do offer this leader cloth here (it says Continuum Frame, but it's the same leader cloth for your Q-Zone Queen) - leahday.com/products/continuum-frame-leader-cloth

@Mosshikes 2 жыл бұрын

@@LeahDay Thank you so much for your response and advice! I ordered leadercloth from Grace on April 30, then never heard anything. No shipping date or ETA. I called customer service May 9 and they told me the leader cloth is backordered indefinitely, so I cancelled the order. I don't know if the kits are back ordered, just the fabric by the yard. They said they are completely out and have to get more manufactured. I dove into my stash and discovered I have just enough muslin to make my own! Another solution would be to pay for four more clips for the back rail, but I'm holding off on that. Hopefully problem solved. :)

@lesliescully3544 Жыл бұрын

Thank you for the information. What type and weight of thread do you use?

@LeahDay Жыл бұрын

I'm using Isacord 40 weight embroidery thread. It's awesome!

@lesliescully3544 Жыл бұрын

@@LeahDay thank you

@janenoble1175 3 жыл бұрын

Is there a frame quilting foot for a baby lock machine?

@LeahDay 3 жыл бұрын

Yes, one of our Convertible Feet might fit your babylock! leahday.com/products/convertible-darning-foot-kit Just plug your machine name and model number into the box when you order. If we can't locate a foot that fits, we will refund your order.

@sheryldodemaide9966 3 жыл бұрын

Hi Leah....I am thinking of buying the Qzone hoop frame. Will my Janome 6030 work with this frame...Thankyou

@LeahDay 3 жыл бұрын

Yes, this machine will work, but you'll likely only have 2-3 inches of quilting space. I fear that would be more annoying than helpful so I would advise saving for a bigger machine or longarm instead to go with your hoop frame.

@kay.hthrkc9302 3 жыл бұрын

Would my Janome M7 fit on this frame?

@LeahDay 3 жыл бұрын

Yes! It's a very big machine and will give you lots of space to quilt. Keep in mind you can put longarms on this frame too!

@HeidiRider 3 жыл бұрын

Your machine seems centered right/left and front/back on the platform of the frame. Can you create more space for quilting by placing the machine farther forward or back?

@LeahDay 3 жыл бұрын

Nope. The space is limited by the harp space of your machine. After slipping the back rail in place, no matter where the machine is located on the top plate, the space is dictated by the amount of room you have between the back of the back and the foot.

@karenviscontini6510 3 жыл бұрын

Will the frame work with a Juki TL2200 QVP Mini?

@LeahDay 3 жыл бұрын

Yep! That machine is very similar to the Janome 1600 so you will have the same high speed and space that I have in this video.

@silviathomas3224 3 жыл бұрын

I was wondering what you place the machine and quilting hoop on. Is it a table?

@LeahDay 3 жыл бұрын

The entire system is the Hoop Frame. Meaning the hoop area is attached to legs that stand on the floor.

@kristensmith9029 3 жыл бұрын

I have a Singer Quantum 9960. It has a 6.5 throat space. I know that’s only going to give me like 3” of quilting space. So would it still be worth upgrading and getting the frame??

@kristensmith9029 3 жыл бұрын

I’m looking at either the q zone pro or the continuum frame.

@kristensmith9029 3 жыл бұрын

Also any idea if there is a foot for my low shank singer like the one you have in this video?

@LeahDay 3 жыл бұрын

Yes, I do have a low shank darning foot to fit your Singer, but no, it probably won't make you very happy to move this small machine to this frame.

@Thisisit120 3 жыл бұрын

Does this frame work on all Janine machines?

@LeahDay 3 жыл бұрын

Yes, so long as you have at least an 8 inch harp space - that's the distance between the needle and the motor on the machine. Less than that amount of space isn't really practical as you will not have enough room to enjoy quilting on the frame.

@gramps8334 3 жыл бұрын

Will this frame fit on the HV sapphire or designer epic. Thanks

@LeahDay 3 жыл бұрын

Yes, most definitely.

@lavenderlaceladylavenderla5420 3 жыл бұрын

I have the Sapphire and it fits.

@flohartzler5505 3 жыл бұрын

What is easiest way to replace the bobbin.

@LeahDay 3 жыл бұрын

Roll the machine to the side and flip up the quilt so you can easily see the bobbin area. Then pop out the bobbin case and replace it. Top loading bobbins are trickier and I often try to check the amount in the bobbin as I'm re-hooping the quilt.

@flohartzler5505 3 жыл бұрын

@@LeahDay thank you yes I have to move quilt. But ur video,s have helped so much.

@jenn5843 3 жыл бұрын

Can u use the Janome HD9 on this frame?

@LeahDay 3 жыл бұрын

Yep, you'll have the same amount of quilting space as my Janome 1600.

@cherylfoster8734 3 жыл бұрын

Hi, I have a quilting frame and use a pfaff domestic sewing machine, do you know if pfaff make a similar foot?

@LeahDay 3 жыл бұрын

I may be able to fit a Convertible Darning Foot to your machine. Send us an email with your machine's make and model and I'll see if it can fit. leahday.com/pages/contact-us

@cherylfoster8734 3 жыл бұрын

@@LeahDay thank you, my machine is a pfaff Quilt expression 4.2. Fingers crossed 🤞

@firecracker6286 2 жыл бұрын

Hi Leah, I have so many questions. 1st can I purchase this foot from you? I have a Janome 6400 Memory craft QCP. My 2nd question can I use a pantograph on the front of this fame. Thank You for all you do for us . Firecracker Linda Evans

@LeahDay 2 жыл бұрын

Great questions! Double check your machine number - I don't have that one listed, but I do have a 6300 and 6500. I do have feet in stock for both of these. And yes, you can quilt small block sized designs from the front, but I wouldn't recommend trying to quilt an edge-to-edge pantograph from the front of the frame. It's really best to quilt from the back with the paper taped to the table top.

@bikentrike 3 жыл бұрын

How wide of a quilt would a person be able to quilt that wouldn't require resetting?

@LeahDay 3 жыл бұрын

32 inches wide would be perfect if you wanted a little space on the edges to test your stitching.

@bikentrike 3 жыл бұрын

@@LeahDay Thank you Leah

@joannemaner4163 3 жыл бұрын

Leah can you do rulerwork with this setup? With a longarm you need a plate under the bed of the quilt to give a hard surface for the rulers to rest. Do you need something similar with the Q hoop system.

@LeahDay 3 жыл бұрын

Yep! You can do ruler quilting on the hoop frame. I've played with this on this machine and I found the machine was wide enough and bulky enough to support the rulers. If your machine was really skinning and narrow around the needle, you may need to purchase an additional ruler plate or extension bed and that might be tricky. I tried out the only one available for this kind of thing and was not impressed. So my advice would be to try rulers and see if you have enough support with your machine. If you don't, if the machine just doesn't have enough space to support the ruler, that is just not something you can use while your machine is on the frame.

@annlange7519 3 жыл бұрын

When will we get episode 39 on the quilt story?😄

@LeahDay 3 жыл бұрын

I believe you have me confused with someone else Ann. 😀

@annlange7519 3 жыл бұрын

Leah Day Isn’t ‘Mally the Maker’ yours?

@jacquelinewaldyke1459 3 жыл бұрын

@terryjenkins8194 3 жыл бұрын

So so disappointed. I had my heart set on this machine and can’t find it anywhere. You had my husband convinced too. 😢

@LeahDay 3 жыл бұрын

We have 12 on order that will hopefully be shipping to us by the end of October. If you go to - leahday.com/1600 - click on the orange button "want to know when this is back in stock?" You will be emailed as soon as we get the machines back in stock. Almost all home sewing machines are out of stock right now. Between the virus lockdowns and mask making, everyone is getting into sewing. So just understand that it's a challenging time to get your hands on any machine and all dealers are trying to do our best.

@marywilliams5262 3 жыл бұрын

Do you think you could reverse the roll so that it is in the front and thereby avoid losing any quilting space? I find you to be the most interesting textile artist on the internet. What I mean is that I find myself wondering about your life, educational history, beliefs etc as I watch you. You are obviously intelligent and thoughtful and I value learning life lessons or perspectives I have not considered. You share a great deal but if you have not considered doing a series about yourself and inspirations then I would like to request that. You look very young but I’m guessing you are over thirty based on info in some of your videos... like 34? You have a HUGE bright energy that is disguised by your size and soft voice...and I can’t stop thinking of you as a Viking Seer but that could just be my constant viewing of The Last Kingdom on Netflix. Lol I am a Christian but I also value GODDESS energy and you have it off the charts.

@LeahDay 3 жыл бұрын

Thank you for your kindness Mary. Yes, you can start in the middle of your quilt and stitch the upper half, then rotate and stitch the lower half. It's on my list to try this myself. I have shared a podcast that's more personal, but have slowed it down considerably because I'm now tackling my addiction to work. I've also become a Christian and will be creating a new series of quilts focusing on God's mighty power and love. I did write a book on my Goddess quilts which is a bit of an autobiography - leahday.com/products/leah-days-goddess-quilts-print-edition I've moved from this series now, but still respect where I was over those years. Enjoy!

@marywilliams5262 3 жыл бұрын

@@LeahDay I am glad you have found Christ. I ordered your two books today and will be watching more of your content. Thank you for all you put out there and share.