I have a SWANN security POE camera system. Water got into 2 of the camera POE connections over the years and finally killed the signal I contacted SWANN to ask for the wire diagram and they told me that it was THEIR wiring and it was not to the public AFTER long searching the interweb and youtube i found this video IT WORKS!!!! I have to use the T568B wire but it WORKS and saved me lots of $$ to replace the cameras THANK YOU!!!!!

Thank you very much, worked for me brought back a hikvision exir from the dead. Thanks for all your clips especially your IDS tutorials.

Thank you very much dear it's really helped... I spend hours to do this but after watching this video I found I connected the cables totally in reverse order ;) Lots of respect for you, from: Dubai

Thanks for this vid. Helpful, Clarity and essence. Love it!

MANY MANY MANY thanks i got my camera's working again ! tho i soldered them straight to a one line utp cable that goes straight to the POE switch and it works !!! :D

interesting video! I have a Hikvision camera too and it's really good! works perfectly with my Xeoma video surveillance

Just wanted to say thanks I the sun ate up 2 cameras rj45 plugs when I went to unplug them the connector fell apart I had already bought a new one I just fixed one of them. Soldering works great no issues video stream looks perfect. Instead of twisting I put tiny heat shrink on and butt soldered the wires to one another I fly lot of RC so tiny wire soldering was easy.

Good work mate… really appreciate it.

Awesome. Going to try this today. I was thinking this may be a good opportunity to generate some toxic lead fumes! Can you expand on what you mentioned about the wiring reducing potential bandwith. Is that because you just crimp them and didn't solder, your crimping style, or because you insulated them from each other with just tape? Would prefer not to loose any throughput and I have very high MP cameras. Guess I'll compare the throughput of them as I fix mine before and after solder with an identical camera that hasn't been damaged.

You can get RJ45/8P8C connectors designed for stranded cable that don't come loose. Good to know the colour coding though, thanks very much for sharing.

Thanks, fixed my problem

respect mate... appreciated

This worked perfectly! The colour matching of the wires helped a great deal! Thank you!

Ivw comw across a problem in my rewiring situation with my hemivision 311, my eathernet wiring has one black wire left to rewire onto main camera cord, and the reset button wiring has a black wire as well, but the wiring coming out of my camera has only one black wire left to use, im baffled, would they of both been connected to the one? Or do I need to dig deeper into the camera wiring end and hunt for some Mia black wire that maybe got pulled out further in?

useful information you have a south african accent :)

Can you do a video of this but with a coax Swann 615

Thanks for this video. I have one question. My camera types dahua broken wire I want to connect to RG45 ???

It appears as if the pinouts for both A & B schemes are reversed for blue-blue/white in the chart provided by Hikvision. Don't know if these pinouts are merely passthru's, but just wanted to point it out.

i cut off the dc jack only, careful to not let any 2 wires touch and now the IR doesn't work. despite being powered of PoE, Chinese ip cam EDIT: red to red and black to black, the dc jack doubles as connection/union for 2 red and 2 black wires.

Hi i got kknoon cctv camera can you tell me colours in order please

This is a very helpful clip.Anyone know how I can get the colour code information for a annkeP121 9 wires ? Customer service Tech department not helpful

hey, i did the whole thing as the video says, but as i connected the camera into POE, it says “IP camera does not exist” but says its connected in POE settings. Did i make something wrong wiring or is that some else issue? would love to get your answear

i have ptz ip camera hikvision and my camera model number is DS-2DE4225IW-DE what is the combination of my RJ 45 pinout connector

hi thanks very much for this ,, i did it ,the camera is switching on but still not working ,, like a network problem ,,, maybe i rewired it wrong ?

How many wires that camera got

hi can you please help me find the color pattern for q see 1080p ip camera. I have four cameras not working due to the plugs pins broken and I can't find the color code for model qcn8004b. thanks

The pigtail cable of my bran new 4k Ip camera got eaten midway by a rat and I don't know why it loved the cable . I don't think this is covered by the warranty so I might have to do this but I am going to need some magnification lol

Is there a way to remove the ethernet connector? Otherwise I have to drill a 25mm diameter whole through a 300mm thick brick wall just to fit this bulky thing...

An rj45 will have water intrusion no matter what unless you encase it. But they make crimp connectors for stranded cable. They are smoke color instead of clear and they come with a boot/ strain relief. But you are supposed to twist the copper and when you insert it into the crimp jack the sheathing or outer jacket of the cable needs to be inside the insert and the rectangle push in is supposed to press and hold the wire in. The pins for the stranded have 2 hooks instead of the stab in on the solid connector. Also those female/ female adaptors are the #1 cause of most of my call outs for no network reports.. they just dont hold the connectors tight in and properly seat the connections. But either way they just came out with a crimp universal connector where you pull the individual wires through the connector itself, no stripping, no guessing if the wires are all the way in or nothing just line up the colors and crimp, it cuts all the wirez flush.. good lil deal there...

I can't believe that someone is generous with her time to help others and ungrateful people make idiotic remarks. Making constructive criticism is fine and helps everyone, but uninformed crude remards is just rude.

for a fosvision camera the equivalent T568B

hello, I would need if you can upload an image, of how the union of colors looks, since I watched the video but I do not understand much English and it is not clear what color of the camera with the color of the network cable Black: Orange/white Brown: Orange Green: Green/white Orange: Blue Red: Blue/white Yellow: Green Purple: Brown/white Blue: Brown ?

Boss how about amcrest domecamera

I had a Rat chew through my cable and my camera is a six wire, 2MP Camera from Techage which appears to use a Hikvision camera just branded differently. My wires are O/W, Orange, Blue, Grey, White, Black. A total of 6 wires. I can't seem to find the equivalent Cat 5 color codes. Any thoughts. The rats didn't leave me the RJ 45 receiver to do a pin out test unfortunately. If anyone has the coding, I would be grateful.

anyone knows BESDER 6024PB color wirings?

can you share color pictures?

You can find wire colours here: www.cctvforum.com/topic/33526-hikvision-ds-2cd2032-i-teardown/?do=findComment&comment=267377

Hi thanks for the video. please can i get help with Premax poe ip camera PM-BCIP2200. THANKS

It should be like this way. HIK Vision Camera RJ45 Connection White Brown Brown Brown White Blue Green Grey Blue White Purple Blue Green Green White Yellow Orange Orange Orange White

Sir मेरे कैमरा का पोर्ट टूट गया है wiring कैसे करू

Can you do a video of this but with a coax Swann 615