No video
How to rebuild a Honda distributor
Рет қаралды 9,477
Күн бұрынIn this video I will show you how to rebuild a Honda distributor video. Below are the parts that I used.
Ignition coil - amzn.to/47KfmQi
Distributor seal kit - amzn.to/3qUfgou
Distributor cap and rotor button - amzn.to/3KReoYv
@kenelder9615 3 ай бұрын
use a very good philips or japanese JIS to unscrew the rotor cap, it can be on very tight
@CorpseFreak 2 ай бұрын
I need a good JIS honestly
@DatJere 15 күн бұрын
GREAT VIDEO ! QUESTION: has the shaft some movement like axial o radial?
@h.m4612 28 күн бұрын
You know very well
@plowe6751 4 күн бұрын
Are all 3 sensors (crank, TDC, and cylinder) in that one assembly there? It looks like one big sensor that is "bent". 1:28 But I only see 2 wires coming out of it, so maybe not. Edit: My question is answered at 5:56.
@jom7796 5 ай бұрын
(whisper) that’s what she said. Lmao that was funnyRandom!
@CorpseFreak 2 ай бұрын
She liked it too
@DadTimes Ай бұрын
Hi! Great video! Is this for a ‘95 civic dx ej2? Thank u!
@CorpseFreak Ай бұрын
@@DadTimes it would work for any d or b series.
@DadTimes Ай бұрын
@@CorpseFreak thank you!
@SG901 3 ай бұрын
HELLO: can i ask whats the meaning off the spring you put back in the coil: ,mine dit not have the spring and i put another spring in there: is it possible that without the spring the coil not fire* greetz from belgium
@CorpseFreak 3 ай бұрын
Yes. Spring is Needed for fire. It's closes the gap from coil to cap.
@SG901 3 ай бұрын
Ok thank you for the information. Greetz geert
@leorivera1372 3 ай бұрын
There should only be one washer when pulling out the pin? Mine had a lot of play, side to side when moving it so i thought it needed 2 washers?
@CorpseFreak 3 ай бұрын
This was an untouched dizzy. 1 from factory.
@leorivera1372 3 ай бұрын
@@CorpseFreak okay thanks was trying to find out where the leak was
@leorivera1372 3 ай бұрын
@@CorpseFreak sorry for the question, had to ask since I opened a distributor on a accord and it had 2
@CorpseFreak 3 ай бұрын
@@leorivera1372 no worries man! Every dizzy I have ever seen has been one. Haven't touched many accords though I'm actually working on fixing a hacked together obd1 to OBD2 ecu right now
@808breaks 9 ай бұрын
Will the ignition coil you have in the link as the JHD500 fit and work on a 99 civic obd2 B distributor?
@CorpseFreak 9 ай бұрын
Just saw this. Let me take a look
@CorpseFreak 9 ай бұрын
If you have a 99 SI Which I think the Engine is the B16 then the ignition coil OEM part number is 30510-PT2-006 which is on the link I posted. you can find oem part numbers at hondapartsnow-dot-com
@ivanr5436 5 ай бұрын
What can i do if the pin doesn't slide out? Its stuck in there but your video and others it just gently slides out
@CorpseFreak 5 ай бұрын
Did you take the lock ring off?
@ivanr5436 5 ай бұрын
I did. The pin is loose on the outer key but somehow stuck towards the center of the shaft. I tried lightly tapping but nothing
@user-ge9wk1de6c 5 ай бұрын
At 8:22 how donyou know you didnt put it 180 off does it matter ?
@CorpseFreak 5 ай бұрын
5:37
@malemex2002 2 ай бұрын
Sloppy
@CorpseFreak 2 ай бұрын
Glad you enjoyed it!
donyboy73
Рет қаралды 1,6 МЛН
Wise Monkey
Рет қаралды 109 М.