Thank You!!!!!! You saved my life. I did it and my external disk works properly. Years of 3d design projects, videos, photos... I am so happy to have it back. Now I am going to copy all to another disk. God bless you! :)

All the dead hard drives are always Seagate

I had one drive with important data in it, and was not working since a week. Suddenly today morning youtube suggested video which I wasn't expected. I've recovered more than 75% of data from that drive. Thank you

Lol that disclaimer at the end should be at the start

Excellent video! Very few people on KZfaq or anywhere have shown that before you pay a data recovery company thousands of dollars to recover your data, it can't hurt to try this FREE fix. Love it.

I was really scared about opening up the hard drive since I've never done anything like this before. But your instructions were easy to follow. The Seagate external hard drive was only a year old! Will never buy it again! Your video rescued all my photos and documents. Thank you SO MUCH!!!

After watching other YT videos on this topic, this is the best one to date I have seen. Glad you mentioned that after opening the hard drive and retrieving the contents, to not put the drive back into service as it will not be a reliable device. I would say in this current day and age, this isn’t quite so common as most of the new drives bought today are solid-state drives, although there are still lots of these mechanical drives still in use.

2:49 AND THE CROWD GOES WILD!

YOU SAVED MY LIFE!!! I followed your steps and I was able to recover my design files and pictures. Thank you SO MUCH!!!!

0:21 We can make a damn remix out of that!

Of course, I held my breath, awaiting your warning (at 3:05) that no hard drive opened this way should be re-used. Inevitably, some who watch your video will believe that if the drive now spins up, and was found on completion without obvious scratches, the drive has been brought back to life. The whole point of this procedure is to recover existing data as quickly as possible, and then put the drive to work as a fascinating paper weight (marking the drive with its volume name(s) and DOA date with a marking pen). Such "marking pen" documentation avoids enormous grief with data, later.

This trick totally WORKED!!!! One of our laptop's hard drive totally died. I did this trick and was able to access the files using a SATA-to-USB cord. It was a life saver!!!!

Thanks! This saved me. appreciate the short and straight to the point video!

All I can say is WOW. I thought once the HD is opened in open air its dead. Kudos to you for getting this to work.

Thanks,From Tanzania, East Africa,I have fixed my hard disk through your instruction,welcome to Tanzania to see wild animals

This was a brilliant Video. Excellent picture quality and sound. Great technical content. Well done indeed!

Thanks!!!!!!!!!!!!!!!!!!!!! I was using my old external HD as paperweight since it die like 6 years ago, and i wasn't so sure of trying this and IT WORKED!!!!!!! I recovered lots of memories that i tought they were definetely lost. Thanks a lot!!!!!!!!!!!!!!

He definitely nailed it!! How many of you guys found this video to be a mocked carbon copy of the video from DIY Perks: How to recover data from a hard drive (stuck heads: buzzing, clicking, etc) ??

Resolved my issue following your video and saved precious data, this video is not doubt priceless. Thanks a lot for making this type of video😍

excellent video!, precise and to the point. you really saved me !

>dead hard drive >seagate IMAGINE MY SHOCK

Amazing! It worked perfectly! Thank you man. Nice work.

Thanks dude, can you say which connector you used to connect both the old hard drive and your PC. i struck with that stage. Thanks in advance

man I missed this kind of tutorials lol. Great work here, thanks!!!

Whoa! Well done! Thanks Dude!!!

"how to recover data in some rare cases or how to make it impossible for data recovery lab in most cases"

very helpful. I started at the 3rd option. works 100%. I used a barracuda hardfdrive 1 Tera. it installed in a few seconds

Interesting video.. skipped through it alot cause im in a hurry, but hit like so i can watch it later. Ty.

Is it possible to retrieve data from a dead or failed hard drive? I've bought something that allows me to connect with to the computer, but it can't find any of its old files on it...

Amazing video, thank you so much

Just saved $1000, KZfaq has saved me so much money over the years.

you are not like the others who puts link filled with adds, so u deserve to be subscribed..... thanks for the plugin and all the best for future

Thank you, a very simple and super useful video.

i'm no engineer, but you didn't recover data from a dead hard drive. you saved the data by saving the hard drive. vast difference.

Outstanding video .. not to much gab ( which We don't want ) but action ... Thanks !!!!!!!!

This video is the best explained and most concise one, no nonsense! Thank you. I learned a lot from your video despite it was brief. Before watching the video I only know to open the hard drive to get the magnets out to hold my screw driver on the wall. Now at least I can move the arm to put the read/write head back to the edge for data recovery.

thanks to you man i save my porn

wow, i have thrown away so many drives because of this problem. Many thanks i have learned a lot today

Thanks for sharing your valuable experience.

Can you please tell me what everything you are using to connect your computer to that damaged drive?

2:49 GOOOOOOOOOOOOOOOOOOOOOOAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAALLLLLLLLLLLLLLLLLLLL

Something else that could be causing this problem: the USB connection/unit is failing. This is what happened to my Seagate external hard drive (bought in 2008ish). The unit was making a very faint clicking noise, and so thought the problem was the hard drive (as shown in this video). Once we got the hard drive out of the plastic shell, we put it into different 'shell' (hooked it up to power and a USB to the the computer) and the clicking noise went away, and i was able to access my files without an issue! Turns out the USB unit had become very loose from the green circuit board (it was so loose it was flipping up from the board), and so was basically not doing it's job. Of note, the hard drive got really hot after only running for 15 minutes, so it's probably on the fritz as well, but we were at least able to get data off of it before it (eventually) dies.

What's that card that you used for your HDD sound ???

Hey bro what's the name of the cable you used to connect the hdd to the laptop???

This is great... The only problem with this is that most people will think that they can simply open an HDD in a regular room. HDDs are highly sensitive to particles in the air and must be opened in a highly controlled environment (ie. Clean Room). Without the proper tools and training, the user will end up making invisible (or visible!) scratches on the platter, rendering the data permanently lost.

you gotta edit that title, you just fixed stuck head and never recovered data from dead hard drive

BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)

this is what we call stiction in the field, when you heard that sound it can also be a motor seizure which blocks the platter. My 2 advice as DR Technician are 1 do this only if you don't care about the data, if your data are important then go to a professional 2 please don't use the second hard drive on the platter, the guy on the video is well versed in doing it but you may easily scratch the platter by doing as in the video. A method that you can use is to put your finger on the base of the Heads in the circular and outer area and rotate it while you rotate the screw (anti clock) in the center of the hard drive. The heads will go toward the outer part

lol all those torrents though, 50 shades of grey? lol cool vid though.

Thank you for such excellent tip and advice. Your video tells us what to do after we open the drive. By the way, how long were you able to use that hard drive after opening it and exposing it to air?

fixed my Toshita Canvio Connect II with ALL my Vacay 4k footage on it with this method, head stuck on platter. Now spins fine and can access almost all data! Thank you for saving my vacay!

Hi, I have a 750gb WD Scorpio Blue drive that was dropped and now when powered up it gives a clicking noise and the platters spin but the heads will not move across the platters. My laptop bleeps when the drive is plugged in (and out) but does not show it in computer management. Any advice on recovering my data would be appreciated.

Lol 50 shades of grey..both uncut n normal lol...🤣🤣😂🤣😂😁😁🤣

how can get or buy a hard disk adapter with USB plug . my hard drive is similar as this one.???

This was so helpful!! Thank you

Hey man, It works great and without any problems.

Fifty shades of grey... Damn man

I know it says “for beginners” but I would still be frighten to do this with a dead hard drive I have that I would love to retrieve data from

Hi ,what type or size screwdriver you uses for take out the screws?.can show me the part# or model of screwdriver? This is for laptops? Thanks...

Wow what an acNice tutorialevent! Best of luck for the rest of your future, I’m looking forward to being able to invest when I turn 21 in November!

Excellent , worked perfectly for me, thanks a lot.

I lost so much data because of that issue. I wish I knew this year's ago!!!

I didn't had that T5 screw driver so forced open it but it didn't work then took a scre driver and as it was spinning I made some designs then I threw the hard disk in garbage Thank you very much Now I feel great.....

thanks a lot dude you saved all my records from scamming people you are amazing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Being about to read the drive directory information, and being able to actually pull a valid image of the drive contents are two entirely separate things. Opening a HDD outside of a true 'clean" enviorment is a death sentence for a drive, no matter how clean you think your work space is. Also, you most likely were placing some very nice scratches on the platters as you dragged the heads across them, meaning read error after read error when you try to image the drive. I would be very interested in seeing a full clone of that drive happen without it either failing outright, or having so many read errors that the data is unrecoverable.

not data recovery; this was repair of faulty/troublesome arm or just making it temporarily operable for the data recovery operations

Thanks bro, i've recovered all my data, thanks you, so much

Hey do you got a link to the tools you used? I cant get that one darn screw hidden under the sticker out, the 5-pointed star one

my issue may be different. I have a Phanteks Enthoo Elite. It's a dual system setup. Separate PSUs for each system. The drives are used by the mini-ITX that i have. I have 3 WD Enterprise Drives. One Red (6TB), and two Gold (12TB and 4TB). I connected the Red drive, and 4TB Gold drive via 90 degree sata cables to the mini-ITX. And their power comes from the Corsair PSU (with Corsair cables) of the MAIN system. Both drives were detected by the mini-ITX until i thought, "if the drives are being used by the mini-ITX, i should should plug in their power to the Thermaltake PSU (the one being used by the mini-ITX". So, i turned off the system, flip both power switches off, waited 30 seconds and then unplugged both drives from the PSU of the MAIN system. Since i was at it, i connected the third drive (12TB Gold) to the SATA power cable, and plugged in all three to the Thermaltake PSU. Initially i forgot to connect the data cable of the third drive to the motherboard. I'm not sure if i had powered on the mini-ITX at that point. But i connected the data cable of the third PSU while the system was off. I powered on the mini-ITX, and then none of the drives were detected in Windows. I have an UEFI BIOS but there is no menu/listing for connected devices. Only in the Boot menu, the boot devices that show up are the M.2 drives ON the motherboard. After i had a friend in I.T. help me remotely. I connected the devices one by one, and even tried different ports, and enabling ALL SATA ports in the BIOS. None are detected. We even tried connecting the drives one by one to the MAIN motherboard, but the drives were still not detected. Originally all the drives were detected by my old computer through it's external hot swap bay (Thermaltake Overseer RX-1). I tried using the drives on my old PC, and they weren't detected there either. I don't know what else to do. I tried feeling whether or not the drives spun, but couldn't feel anything on the new system. On the old system it feels like the are vibrating, but that could just be the other components in the tower vibrating. Is it possible that the 90 degree data cables somehow got damaged because of how they are curved inside the case?? Should i use separate power cables for EACH hard drives? I know it seems like a dumb suggestion but I'm freaking out here.

That hard drive is playng techno listen at the very beginning😂

Can I ask ? like you have said that an opened hard drive is already dead, is there a possibility to copy the files to the new drive?

Great video, thanks!

Ok so just use this method to get the HardDrive working just to be able to get your save data / files. Got you 👍

Can you say me why, when you connect hard drive he began click

It doesn't have to be that complicated. Good video

Excellent video! Very few people on KZfaq or anywhere have shown this If it works i'm gonna subscribe

My HD died so I took it apart to see if the heads were stuck but they were not. What else could cause it to fail? What else could I do to recover the data?

0:22 Sound effect for SoundCloud rappers.

Thank you sir.. it works for me.. my data is save now

thanks, it actually let me through so i could download it.

Thanks for having muted those seconds of disc scratching when putting the header back in its place. Also, what IS the way to open a hdd so you can reuse it?

0:21 Sounds like you'll drop some sick beats.

it helped me a lot to recover my hd from my notebook. thanks for the tip.

What if it's isn't have sound !? I have hard drive that corrupted by the force on body.. what can I do with that ?!

*Great tutorial* , now I just have to shell out the $14000 for a clear room if I want to use the hard drive again.

thank you soo much very direct link n works for me love the way you expressed the installation .

Great Information... Thanks for sharing the video. At least some us now how to get one running again if the readers are are stuck. Thumbs up... You have a new subscriber...

mine doesn't make any sound, why is this?

I've had some good luck simply dropping a stuck hard drive on the floor to free it up

Thank you very much Bro. May you long live

Ima download it thanks for sharing!!

Isn't a problem to open the drive in a "non dust free" enviroment?

What is that thing he used to view what's inside the hard drive

😍💜Thank you iam goona to revive my previous hardrive 😍

Wow. useful tutorial. Clearly explained.....

my Dell laptop fell down from a height of 4-5inches. and now the internal hard disk is not detectable and is making some 'tik tik' noise when I swithon the laptop. I contacted some data recovery agents and they said they would charge upto 50000 for that. what might be the actual problem? is that data recoverable?

You should have removed the Heads Magnet so that when you moved the heads while turning the platter they would freely move and would not be hard to move. I did what you did and guess what? I caused damage to the platter. In fact I didn't even use a screw driver to move the heads I saw on another video to use a dental pic and it STILL caused damage to the platter.

Thank you for this video 🙏

Thanks for the great tutural.

You're not really recovering data off of a "dead" drive because that drive isn't dead. It's only jammed.