How to refinish Gibson Les Paul R9 [PART 2]

Рет қаралды 31,326

Жыл бұрын

PART 2
So, the soft, thick and sticky factory Gibson nitro lacquer is completely removed and now I can start painting with varnishes and dyes. For this project, I'll be using lacquers and stains from Nitrolac, a company that makes amazing materials for finishing guitars. I have already tested all the materials that they sent me and you can see the results in the previous videos.
Link to these wonderful NITORLACK materials here: nitorlack.com/en/?wpam_id=63
PART 1: • Gibson Les Paul R9 ref...
🔴PATREON: / 8bombcustom
🎱 Workshop website: www.8bombcustom.com/
🔥 PAF pickups clones : www.8bombcustom.com/pickups
👁 Instagramm: / 8bombcustom
🥷🏼 TikTok: / doctornitro
You can support me and my workshop on Patreon. / 8bombcustom There you will find private content, tutorial videos, giveaways of my PAF clones and access to auctions. This will allow me to make more quality videos and more translations into English. You can also support me through PayPal: 8bombdovnar@gmail.com Thank you!

Пікірлер: 156

@CAGED1702 Жыл бұрын

I watched Part 1, very interesting to see how the original lacquer peeled off. Can't wait to see Part 3! Keep up the good work! 👏

@8BombCustom Жыл бұрын

Thank you

@GrahamB64 Жыл бұрын

You sir, are an artist! Can't wait to see the finished guitar. Great work!

@8BombCustom Жыл бұрын

Thank you

@RedRose4711 Жыл бұрын

Fantastic job.Great to watch the whole process.

@8BombCustom Жыл бұрын

Thank you

@bridge500t Жыл бұрын

Love watching the process and progress. Great video!

@8BombCustom Жыл бұрын

Thank you

@davidsharp3110 Жыл бұрын

Excellent work! So great to watch your work.

@8BombCustom Жыл бұрын

Thank you

@rokugen69 Жыл бұрын

I'm looking forward to seeing how the new paint will turn out.

@petermichalowski Жыл бұрын

Amazing work. I love watching your clips.

@8BombCustom Жыл бұрын

Thank you

@666Sloth Жыл бұрын

Awesome as usual. Bravo!

@8BombCustom Жыл бұрын

Thank you

@nightsdew8136 Жыл бұрын

I watched both parts now and this is just awesome work. I had watched 7-8 other videos before, including secrets of 59, and refinish projects. You are a source of knowledge my friend. I wish I could have more conversations as I'm sure I could learn more from you.

@8BombCustom Жыл бұрын

Thank you

@ericsfc1ea.16 Жыл бұрын

Nice color build/burst & sandout, look forward to see the final sand/polish and deep shine. Nice work!

@8BombCustom Жыл бұрын

Thank you

@geraldponce8336 Жыл бұрын

Great job. Coming along nicely

@8BombCustom Жыл бұрын

Thank you

@frankpfau9054 Жыл бұрын

great work and awesome dedication! 🍀👍🏻🍀

@8BombCustom Жыл бұрын

Thank you

@benharwood7417 Жыл бұрын

Another great video! Keep up the great work my friend.

@8BombCustom Жыл бұрын

Thank you

@thestrum71 Жыл бұрын

Always amazing!!

@8BombCustom Жыл бұрын

Thank you

@rockers2rockers616 Жыл бұрын

Show me anyone better than Dr Nitro? His skill with colour is superb.

@8BombCustom Жыл бұрын

Thank you 😊

@juanmacaceres2702 Жыл бұрын

I already knew that Gibson's modern lacquer wasn't as pure as the original 50s, but damn! Now I want to refinish mine ASAP

@stephenharrison7514 Жыл бұрын

If people are paying Custom Shop prices this is the level of workmanship and materials they should expect.

@juanmacaceres2702 Жыл бұрын

@@stephenharrison7514 I totally agree, but the thing about plasticizers is that(among other reasons) purer nitro like in the 50s can't be used comercially in numbers as big as Gibson would because of the gas pollition

@mattrogers1946 Жыл бұрын

The EPA won't allow you to finish a guitar the same way they did in the 50s.

@stephenharrison7514 Жыл бұрын

I believe that the Murphy Lab is using a lacquer that has very similar properties as early finishes, surely the Custom Shop should be using the same product? They aren't exactly cheap.

@SDPickups Жыл бұрын

@@stephenharrison7514 Never from Gibson.

@VoVikoktotororL Жыл бұрын

Awesome! This is so interesting!

@8BombCustom Жыл бұрын

Thank you

@ChadwickRider 11 ай бұрын

You do awesome work!

@8BombCustom 11 ай бұрын

Thank you

@GerryBlue Жыл бұрын

Amazing job, a true artist

@8BombCustom Жыл бұрын

Thank you

@David-wf4wc 2 ай бұрын

Your 1st video is like an audit of Gibson's process. Glad you put this kind of content up. I hope to get mine done. The top is amazing and I think they missed the mark in highlighting it as well as the color (Slow Iced Tea). Nice tones but it would be better if the finish was alive like originals were and could change as its environment dictates.

@bigmike2149 6 ай бұрын

Wow! Incredible attention to detail and craftsmanship. Bravo!!!! Just sub’d 👍🏻

@8BombCustom 6 ай бұрын

Thank you

@dfuzzybuzzy Жыл бұрын

Looks great! Also, cool haircut!

@8BombCustom Жыл бұрын

Thank you

@WarmachineCAN Жыл бұрын

Fantastic job, as always!! Your English is really coming along nicely too! Well done!

@8BombCustom Жыл бұрын

Thank you!

@nutellica85 Жыл бұрын

Well done dude, keep going like that 👍🏽

@8BombCustom Жыл бұрын

@@nutellica85 Thank you

@johnwhitaker545 Жыл бұрын

The people at Gibson should bring you onboard. The only reasons I won’t buy Gibsons anymore is they are overly priced and just… sticky. They feel so user unfriendly to play. Nice work. That’s a stunning finish

@8BombCustom Жыл бұрын

@@johnwhitaker545 Thank you

@elephantfootrisers Жыл бұрын

Nice job on the sunburst!

@8BombCustom Жыл бұрын

Thank you

@alihabibzadeh4451 Жыл бұрын

Вы предоставили одно из лучших видео о гитаре, которое только можно было снять. В этом процессе отчетливо прослеживается сочетание творчества, страсти и настойчивости. Я и все любители гитары благодарим вас за контент, который вы публикуете на KZfaq. Это было очень красиво и необычно. Ждем финальную часть этого процесса, потому что это очень приятно и красиво.♥🤝🖤 (Я использовал Google Translate, чтобы написать этот текст)

@8BombCustom Жыл бұрын

Thank you!

@davidowen2919 Жыл бұрын

My comment was not meant as disrespectful to anyone. You sir, are one of the gifted few. All im saying is that i have owned both Asian finishes and US finishes since the 1970's. I am happy with everything i own and am not particularly convinced it makes a difference. Yes, 3 Gibsons and a list of other ones i don't have room for. Keep going Mr. 8... impressive

@8BombCustom Жыл бұрын

Thank you

@bigtuna6463 Жыл бұрын

You do some great videos on finishing guitars and all your content thank you friend wish you could refinish my lp and age it.

@8BombCustom Жыл бұрын

Thank you

@rediryou 10 ай бұрын

Oh man I wish you were in the USA because I got one that needs to be done.

@pascalfleury461 Жыл бұрын

I subscribe from France.good job. I like it.

@8BombCustom Жыл бұрын

Thank you

@GuitarQuackery Жыл бұрын

I'm glad I discovered your channel. Now I want to send all my Gibson LP's to you for refinishing, LOL. How closely does your font match the font of the original serial number?

@8BombCustom Жыл бұрын

Thank you. My sn stamp is exact copy of vintage numbers

@6xcchamber971 Жыл бұрын

Why put the dye on if it is just going to fade away? Is this the only way to get the end desired result??? B

@SantaAgain77 11 ай бұрын

14:50 )))) скотч на грифе ))) обнимаю тебя чел ))) God bless ))

@edadpops1709 3 ай бұрын

Will UV light quicken the fade on nitro lacquer’s?

@8BombCustom 3 ай бұрын

from exposure to ultraviolet radiation, nitro varnish becomes harder, shrinks and darkens, and subsequently collapses.

@giulioluzzardi7632 Жыл бұрын

Fantastic, you managed to get the colour and the wood to meld together. You must have studied "The secrets if colours" from the restorers of old paintings and if you did'nt then you are a serious talent. Your passion is inspiring. How long does a job like that take to complete? I tried a similar thing on les paul special(Tribute) and it took at-least a year but I got it to look like the wood pores were open. Cool and important , thanks.

@8BombCustom Жыл бұрын

It takes now about minimum 1,5 monts. It's fast. But not all projects i make so fast.

@chesneytube1 Жыл бұрын

Looks amazing! Talking to you in the comments of your last video you said Gibson is checking to stop you from repainting their guitars… how is it possible they can do that?

@8BombCustom Жыл бұрын

It is impossible 😁 I probably should have been scared. But in recent years, other things have scared me. There was so much fear that I gained immunity.

@REINFORDT Жыл бұрын

Looks excellent! Do you spray the headstock or the logo with an amber lacquer to get that vintage “gold” Gibson logo?

@8BombCustom Жыл бұрын

Thank you. Yes, like total finish amber coat.

@AdamEarley2011 4 ай бұрын

If I wanted to spray a very faded light burst, almost orange outside to amber inside (think Slash Jessica les Paul) would it be best to spray a very light coat of red around the outer portion or spray as above and leave in a window for a week or two?

@8BombCustom 4 ай бұрын

You need to use brown for burst shade. Nor red.

@AdamEarley2011 4 ай бұрын

@@8BombCustom thank you so much for taking the time to reply ❤️ will give it a go, here’s hoping :D

@Zubarev09 Жыл бұрын

Ты удивительный, очень талантливый человек! Я горжусь тем, что я знаком с тобой!!!!😍😍😍

@8BombCustom Жыл бұрын

Спасибо бро!

@nathjones1542 Жыл бұрын

Excellent work mate. Your painterly skills definitely come in handy for this application. A question about the colour you mix for the back of the guitar, was it standard to use mica dust.? Is there a better product to thicken out the mix.

@8BombCustom Жыл бұрын

Thank you. I use pumice powder only for porefiller.

@nathjones1542 Жыл бұрын

@@8BombCustom Thanks for your reply. Best, N

@pharmerdavid1432 Жыл бұрын

I wonder if Gibson or Fender would sell us an unfinished guitar? It would be easier than stripping the crap finish off first! I prefer thin poly on body, thin satin urethane on neck, like Fender "Professional II" models use.

@thetoneknob4493 Жыл бұрын

have you ever tested piano lacquer?

@8BombCustom Жыл бұрын

@riggioguitars has tested piano lacquer but in my opinion it too soft for guitars.

@ernestschultz5065 2 ай бұрын

They a re-finish lowers the value of a guitar but in this case it definitely increases the value.

@mylogify 10 ай бұрын

Great finish! I'd be more glad, if you stop smoking. Awesome painting and nice video!

@8BombCustom 10 ай бұрын

Many thanks

@MegaFox. Жыл бұрын

15:00 мне нравится как защищена накладка грифа с ладами))

@8BombCustom Жыл бұрын

😉

@American_Jeeper Жыл бұрын

Ваш талант не имеет себе равных. Мне бы очень хотелось, чтобы ваш интерпретационный стиль был применен к модели Les Paul Tribute от Gibson. На мой взгляд, лак модели Tribute слишком тонкий и слишком тусклый. Пожалуйста, простите мне мою ужасную грамматику... Я научился говорить по-русски 30 лет назад, но сейчас у меня не так много возможностей говорить на нем.

@8BombCustom Жыл бұрын

Спасибо. Ваш русский очень хороший. Грамматика не главное. Возможно я займуст и Трибьют. В моем городе таких много. Но так как лак на них тонкий, то звучат они достойно.

@nicirvin1994 Жыл бұрын

You look like an Alchemist making a Magic potion...

@8BombCustom Жыл бұрын

Thank you! 😁

@chuckwolfboyer7830 25 күн бұрын

YOU DID A BETTER JOB THAN GIBSON DID KOOL JOB

@8BombCustom 24 күн бұрын

Thank you

@bjdenil Жыл бұрын

No filler?

@8BombCustom Жыл бұрын

4:39

@murrayguitarpickups9545 Жыл бұрын

In the Australian sun the dye will fade in just 1 day

@8BombCustom Жыл бұрын

😁 agreed

@dejavoodoo7204 Жыл бұрын

As a fellow aussie i can attest to our bright skies being great for plastics aging as well, and ive got some really interesting results with aging bodies with poly coats in the sun. In most cases the blues will take on a little green hue, Natural finish will get a darker yellowing/light brown/tan, Whites obviously turn to creams surprisingly quickly,...but some reds have slightly darkened on me,...an interesting oddity indeed. * The process of leaving a poly coated body out on really hot sunny days will also lead to interesting grain lines, and other uniform "ray lines" particularly on Alder and Agathis,...the shrinkage on some of these cheap bodies is phenomenal. Silly little experiments but fun none the less,...and it can really lend some more character to a humble squire etc,...and gain the stability that only a fully dried out body and neck can provide. *(I've only had 1 out of 12 necks have a negative reaction, but the glorious natural aged toner effect to the maple is aesthetically very vintage correct, and if you do the fret ends etc while the neck is "too dry", once it settles back to a more stable humidity it will essentially be 100% fret sprout proof, in even the driest conditions on earth. *(just some silly poly guitar experiments:), no one ever mentions this subtle type of poly guitar aging, this is about the only forum where it might come in useful to someone one day. Love your work man, can't wait to experiment more with nitro as well 🤘.

@8BombCustom Жыл бұрын

@@dejavoodoo7204 Great experience and great information! Thank you!

@murrayguitarpickups9545 Жыл бұрын

@@dejavoodoo7204 I have a guitar here, a 76 Ibanez Les Paul Custom (Artisan copy) that was already heat damaged with cracked binding when the owner left it in the car boot for 2 summers, no shade in his parking spot it would have been 50 or 60 degrees. The entire binding disintegrated with all the plastics, warped pickguard (irreplaceable) the press fitted top split from the body, the fretboard cracked. It is a total disaster! I painted my own Les Paul sunburst and left it in the sun for two days and it faded quite a lot

@123uzuz Жыл бұрын

I’m an Australian, and I will die after a day in the sun.

@zivaradlovacki2666 3 ай бұрын

I had a look at their website and cant see if they ship overseas , outside of Europe. Would any1 know if they do? Many thanks

@8BombCustom 3 ай бұрын

I shipp worldwide.

@zivaradlovacki2666 3 ай бұрын

@@8BombCustom that is a great news! Would you say 3L of aging clear nitro is enough for 1 guitar? Also, I have Keda liquid aniline dyes. Good enough to mix with this nitro? Many thanks.

@zivaradlovacki2666 3 ай бұрын

@@8BombCustom hello there. How can I order this Relic nitro. Regards Ziva

@zivaradlovacki2666 2 ай бұрын

@@8BombCustom ok, Ill take no answer as a no to all mentioned above.

@8BombCustom 2 ай бұрын

@@zivaradlovacki2666 1L is enough.

@ronaldnorris873 Жыл бұрын

I don’t understand. Why did the original lacquer finish peel off like that? Was it a polyurethane finish?

@8BombCustom Жыл бұрын

It is Gidson regular factory soft nitro with a lot of plasticizers like on ALL Gibson guitars.

@spiritby2 Жыл бұрын

@@8BombCustom will be very interesting to compare Gibson's nitro and your - how it separates and thickness

@8BombCustom Жыл бұрын

@@spiritby2 kzfaq.info/get/bejne/ett4n9WZmsm1gqc.html

@mattrogers1946 Жыл бұрын

They are not the same finishes they used to have before the EPA stepped in.

@ivan_emege Жыл бұрын

I believed gibson custom shop used a better nitro finish. This is embarrasing

@SIMPle-BoXMaN Жыл бұрын

Добрый день! Когда планируется пополнение контента на русскоязычном канале?

@8BombCustom Жыл бұрын

В ближайшее время не планируется

@SIMPle-BoXMaN Жыл бұрын

@@8BombCustom Понятно...

@green461 10 ай бұрын

I dont get why people use nitro, a 2 part poly hardens like a rock and doesnt stay soft like Gibsons forever. Doesnt smell like sweet candy though. A harder finish would yield a more resonant body.

@8BombCustom 10 ай бұрын

You have yet to deal with this.

@green461 10 ай бұрын

@@8BombCustom I did a tele and a p-bass in 2 part automotive urethane, They are harder and more resonant than my Gibson.

@marfg12345 7 ай бұрын

@@green461 polyurethane is ugly plastic trash that makes guitars look like cheap toys

@globusglobus1391 6 ай бұрын

Сколько будет вам отдать лес пол на перекраску топа в санберст?

@8BombCustom 6 ай бұрын

8bombcustom@gmail.com

@gordonfreeman9368 Жыл бұрын

Дис ис булщит!

@8BombCustom Жыл бұрын

Уот ю мин?

@esmeulonsouzadeoliveira3636 Жыл бұрын

Like 366 ✔💫🎬 📽👍 .

@8BombCustom Жыл бұрын

Thank you

@paulrudy1776 Жыл бұрын

Привет друг . На русском как посмотреть данное видео?

@8BombCustom Жыл бұрын

Привет. пока никак

@alexm.8661 Жыл бұрын

@@8BombCustom оч. плохо, люди от вас уходят, при всём былом к вам уважении, отписываюсь...

@davidowen2919 Жыл бұрын

Who cares

@8BombCustom Жыл бұрын

😁👍

@roccogreco21 Жыл бұрын

Mi potresti aiutare gentilmente!!! Sapresti dirmi come colorare color Ambra i segna tasti della gibson in madre perla?

@8BombCustom Жыл бұрын

Thank you. All technical answers you can find on my Patreon. www.patreon.com/8bombcustom