How To Regulate a ETA Powermatic 80 Automatic Movement | SolimBD

How To Regulate a ETA Powermatic 80 Automatic Movement | SolimBD | Watch Repair Channel

Рет қаралды 51,591

3 жыл бұрын

How to Regulate a Powermatic 80 Automatic Movement**
The Powermatic 80 movement, with calibers C07.691, C07.631, C07.611, and C07.141, is a slightly modified version of the ETA 2824-2 movement. While it shares similarities with its predecessor, the Powermatic 80 is more challenging to regulate due to specific design changes.
To ensure accurate timekeeping, regulating the Powermatic 80 movement requires a high level of expertise and precision. Our team of experienced watchmakers is well-versed in the intricacies of this movement and can provide professional regulation services.
*Subscribe to Our Channels for More Insights:*
- KZfaq: / solimbd
- Facebook: / solimbd.youtube
- Instagram: / solimbd
*Stay Connected and Informed:*
Subscribe to our channels and hit the notification bell to receive regular updates on our latest videos and watch repair insights.
*Professionalism and Expertise:*
Our team of watch experts is dedicated to providing top-quality services and ensuring the utmost satisfaction of our clients. Trust us to handle your Powermatic 80 movement regulation with precision and professionalism.

Пікірлер: 94

@accuracychannel.7242 3 жыл бұрын

Why are you adjusting one screw? You should do the same to the other screw. Can you explain?

@sinanemati5521 3 жыл бұрын

This is the first video shows how to regulate powermatic 80

@SolimBD 3 жыл бұрын

Thank you so much

@sukiiish 3 жыл бұрын

True my friend.

@Red_Pill_King 3 жыл бұрын

The very firt! 💯

@johnraba9322 10 ай бұрын

Nice video. You did, however, appear to bend the pivot of the balance wheel. Before it spun perfectly. Afterward it began to wobble. You have to support the balance wheel underneath before you use a tool to adjust it. The pressure applied looks like it bent the pivot slightly.

@SolimBD 10 ай бұрын

Thanks for the tip!

@rosomak8244 8 ай бұрын

And very likely you just ruin the poisoning of the balance wheel. It will then give quite big differences in reading over different positions.

@mdryfly6450 3 ай бұрын

Yes! It should not only be supported underneath the wheel, but both balance screws should be moved exactly the same amount to retain it's overall balance. It may take a bit before he notices, or not, but this movement was just damaged quite a bit. That bent and now unbalanced balance wheel will eventually get worse and worse, and wobble more and more, right up untill it breaks off. You can buy an inexpensive L-shaped tool that slips under the wheel and supports it for doing just this, it's well worth it so as not to destroy the movement that you're trying to adjust. These are delicate parts and the slightest bend in any part at all will ruin the movement sooner than later. The time keeping will get more erratic everyday.

@noodles6929 3 жыл бұрын

if only one screw is adjusted, the balance of the balance wheel will change. Is not it? And as you push down on the screwdriver and balance wheel, the axle can be broken.?

@lijian1982 2 жыл бұрын

So i dont buy this movement

@Schrottkralle 3 жыл бұрын

You have to regulate BOTH screws EXACTLY the same way. Even 1/100 of a millimeter WILL make a difference. Never do that without a special tool!

@_Napoletano_ 2 жыл бұрын

Are you a eta employee?

@Karizmatik64 2 жыл бұрын

@@_Napoletano_ there's a specific pdf for each movement, and this is what ETA tells in their instructions! also the lift angle is set wrong in this video!

@vonkruel Жыл бұрын

@@Karizmatik64 the lift angle only needs to be set correctly if you want correct amplitude reading

@fizzo9985 4 күн бұрын

ETA is full of it. I’ve been working on watches most all my life and this works just like Omega or Rolex.

@jinxUKBK 2 жыл бұрын

Amazing video. I was always curious how they regulate these movements. Thanks again. Would be great to K ow if a mainsprung balance is better or the older type. What the advantages and disadvantages are.

@hannahuang6118 3 жыл бұрын

Fantastic!!! Will give it a try. Thanks

@SolimBD 3 жыл бұрын

Thanks

@breaktime3269 3 жыл бұрын

Really good video, very much appreciated, thank you! Kind regards bro

@SolimBD 3 жыл бұрын

Thanks brother

@robertopaolasini7962 2 жыл бұрын

Many thanks for this unique tuto. Well done clear and useful. Thanks to you, I have been able to set my new Tissot Visodate Powermatic 80 as accurately as a COSC movement or even better as it's now at +/- 1 sec/day. Regards. Roberto

@SolimBD 2 жыл бұрын

Thank you so much

@ucvietnguyen5876 Жыл бұрын

All Tissot Powermatic 80 movements have already been COSC-certified, bro. The rate, as ETA (movement maker for Tissot) said, has already been set in their factory with a laser

@JimmyBlandfood 7 ай бұрын

@@ucvietnguyen5876 Not true.

@mdryfly6450 3 ай бұрын

No they heve not all been certified, not even close. If it says chronometer on it it is indeed certified, however many of these movements are put into non-chronometer watches. Likely more than not.@@ucvietnguyen5876

@alexb8670 2 жыл бұрын

Useful. Thanks

@SolimBD 2 жыл бұрын

Thank you so much for comments

@bulldogms Жыл бұрын

Personally I would not attempt... But awesome video seeing how it is done!

@sukiiish 3 жыл бұрын

Thank you :)

@SolimBD 3 жыл бұрын

Most welcome

@CACOPHONIE Жыл бұрын

আগের অনুশীলন মূলক ভিডিও গুলো দারুণ ছিলো বিধায় বিদেশি চ্যানেল আর গ্রুপগুলোতে আপনার চ্যানেলের ভিডিও রিকমেন্ড করতে দেখা যেতো প্রায়শই। কিন্তু ইদানিং আর তেমন অটোমেটিক মুভমেন্টের ওভারহলিং কিংবা ট্রাবলশুটিং এর ভিডিও না থাকায় চ্যানেলটি দুর্দশাগ্রস্থ প্রায়। সলিম ভাই ব্যাপারটা গুরুত্ব সহযোগে দেখবেন বলে আশা রাখছি।

@kiseobkim1099 3 жыл бұрын

Thank you for sharing great video. I have a one question. It is fundamentaly same as the Rolex and the Omega. They use timing screw for regulating. It is nessessary to adjust exactly same amount of the opposite screws for keeping poise. Is there no poise problem when you adjusting just one screw?

@StaticVapour590 2 жыл бұрын

You HAVE TO adjust both sides exactly the same, poising...

@mdryfly6450 3 ай бұрын

Yes indeed there is a problem. It is a big issue to adjust just one screw, he wont care for how this movement ends up.

@romangarcia5771 3 жыл бұрын

una pregunta el error es de amplitud y se corrige del volante y de la raqueta mas o menos no

@blueshun 15 күн бұрын

Can the music be anymore louder?

@echeng5271 Жыл бұрын

Thanks for the video. It's now clear that it doesn't have a free sprung balance wheel. Weights on the wheel are for regulating amplitude, not beat error. Interestingly, SWATCH claimed that it's a "high tech" escapement with a specific tool for regulation. Now I know the specific tool is a screwdriver. 🤣🤣🤣

@truespectrum Жыл бұрын

It is a free sprung balance - only one side is attached to a stud. By creating a free sprung balance, the length of the balance spring is fixed and the rate is adjusted by tightening or loosening the screws affixed to the balance wheel. The result is that the balance spring breathes better and confers greater accuracy.

@sagoamicably6486 6 ай бұрын

the c07.111 has the "high tech" i.e. polymer i.e. plastic escapement on the base level powermatic 80. the .611 and .811 have traditional escapements

@wiktorutracki6469 Жыл бұрын

Hi! Please help me. This is c07.611. In description you state that this applies to both .1xx and .6xx. I have heard - many times - that the c07.1xx (as oposed to .6xx) is made so that it is not possible to adjust it or repair it and the entire escape mechanism has to be replaced in case of some problems. This is supposed to be due to the escape mechanism being synthetic. Can you tell me what is your opinion about that? I dont know if I should buy a Tissot Seastar it or not. If it is not repairable or any repair of the mechanism would cost me half the price of the watch, I dont want to buy it. I dont know who to trust and you certainly seem to be competent enough.

@SolimBD Жыл бұрын

Thanks for your kind opinion, I would like to say Tissot is a medium category watch and it uses powermatic movement which has 80 hours power reserve, very good quality machine, hope to get good service.

@Visitor555 2 жыл бұрын

Hi, so im about to purchase my first watch with powermatic 80 and from what ive seen its serviceable and watch maker can regulate it easy as you show on this video, but the big question is if something from these new synthetic parts broke it will be less available from normal watchmaker to have it for replacing and then we need to give it to official distributor for tissot to replace it? And do you recommend this movement for long therm use for years? Thanks.

@lethean1757 2 жыл бұрын

And cannot we change it with another watch's balance wheel system?

@hapdane5938 2 жыл бұрын

This movement seems to be the powermatic 80 version with 25 jewels, so the escapement is made of metal. The version with 23 jewels has a plastic escapement, but it isn't fragile. It's a relative young mechanism so we can't be 100% sure about its reliability trough decades, but remember that ETA is very experienced manufactor of high quality movements, so it knows what is doing.

@hapdane5938 2 жыл бұрын

@@lethean1757 ETA choose a plastic escapement to reduce friction, not to save money.

@lethean1757 Жыл бұрын

@@hapdane5938 oh I see thanks for the comment

@argilaga 8 ай бұрын

Title suggestion: how to destroy your ETA Powermatic 80

@carlkim2577 5 ай бұрын

It's this possible only on the power matic without plastic parts? Ie the higher grades?

@Mehtabsingh10 4 ай бұрын

No, the same on both amd can be done with the one with plastic parts too

@Chloelove785 Жыл бұрын

Is this pretty much the same movement as the H50 in the Hamilton?

@SolimBD Жыл бұрын

Not same movement but balance is same design

@mdryfly6450 3 ай бұрын

Yes it's pretty much the same thing, other than the Hamilton H 50 is a hand wind only version. The balance wheel and it's adjusting screws, as discussed in the video, are exactly the same.

@marcelwatchenthusiast5438 2 жыл бұрын

What would happend with results If I choose 53 degree lift angle?

@watchmaked9467 2 жыл бұрын

This affects the amplitude reading. It will be incorrect by a few degrees or more.

@accuracychannel.7242 3 жыл бұрын

How do you correct the beat error of a Rolex cal 3135?

@SolimBD 3 жыл бұрын

Thanks Mahmood Meer I think the same actually. The screws on the ends are to secure the balance with adjusters underneath to adjust the end shake.

@thegorn Жыл бұрын

By taking it to a Rolex AD

@jurir.8798 2 жыл бұрын

Amplitude 248° ?

@MrZZooh Жыл бұрын

Don't try this at home guys. Take your watch to a professional watchmaker and have them adjust it for you. The 2824 is fragile enough even with the plus minus levers, let alone this one. Don't do it.

@mdryfly6450 3 ай бұрын

Or at least buy the proper tool to support the balance wheel. Not that difficult to do with the proper tools, which by the way are not used here. I have regulated several of these movements with no issues, I do however do it much differently than this. I support the balance wheel with the proper tool, as the hairspring attached to it is very fragile and sensitive, and I adjust both screws exactly the same amount. Just like your watchmaker would do. (assuming that he knows what he is doing)

@ildefons3k540 3 жыл бұрын

Where is the rotor? Did your remove it?

@SolimBD 3 жыл бұрын

Yes remove

@wellwh0 Жыл бұрын

Can 23 jewels version be regulated? ETA name is c07.111

@SolimBD Жыл бұрын

This movement c07.111

@wellwh0 Жыл бұрын

@@SolimBD on video is c07.611 version. That is 25 jewels version.

@accuracychannel.7242 3 жыл бұрын

Can it be regulated by adjusting one screw?

@SolimBD 3 жыл бұрын

Yes

@accuracychannel.7242 3 жыл бұрын

@@SolimBD Thanks 🙏 for a he reply. So there is no need to do the second screw. Are you using 0.8 mm screw driver or is it less?

@Schrottkralle 2 жыл бұрын

@@SolimBD O M G ! 😱😱

@mdryfly6450 3 ай бұрын

NO, definently not. Not if you want it to keep working correctly...or at all.

@The_Great_Hejaz Жыл бұрын

How they managed to regulate watches before electronic device era ?

@lethean1757 Жыл бұрын

Nah man this tech is new check other mechanisms there is a lever before electronic era

@LCMNUNES1962 2 жыл бұрын

LUBRIFICATION NO ?? 🤔

@cb1p111 4 ай бұрын

Lift angle 52 degree at a Powermatic 80? Don't think so! First set your timegrapher right... Then start the work.

@amenhotep7704 Ай бұрын

I checked the tech sheet, they noted they don't even know themselves, can somebody tell me what the lift angle ⁰ is ?

@robocopvn Жыл бұрын

is this true? there are so many people said the powermatic 80 cannot be regulated.

@SolimBD Жыл бұрын

Can be done regularly but the process is a bit complicated

@robocopvn Жыл бұрын

@@SolimBD thank you!

@morlowski 2 жыл бұрын

Powermatic 80 has no levers.

@Lord_Sebastian_Snufflepuss 2 жыл бұрын

Why did they do that? Mine is a bit slow.

@romangarcia5771 3 жыл бұрын

del 2824 quitando la posicion del tren de rodaje tiene poco el powermatic o h10 ni la base es la misma ze a modificado todo baze organo regulador ancora y baze el tren de rodaje no es igual al 2824 ezta modificado materiales de dice que la expiral ed mucho mejor es antima negica barril modificado y lo uni o que pare igual es el modulo de carga y aun asi me parece que no son comoatibles no lo se al 100 la masa oscilante tambien ya que la del power es de una sola pieza y la del 2824 son dos piezas no se trata solo de aunmentar el muelle real y vajar alternancia detras de estos calibres a avido mucho i+d y micho desarromlo tedras ademas yo e notado que el pase rapido de mi h10 y powermatic es mas fuerte cuando pasa que mis 2824 el h10 y powermatic pasa con micha mas fuerza estos calibres no ban a reenplazar al 2824 ni mucho menos pero an llegado para quedarse y viendo el resultado que estan dando otro gran caballo de batalla pues quitando alguna pieza que viene de casa defectuosa eso pasa asta con rolex todos los foros y comentarios y oor experiencia propia andan en oarametros muy por encima de cosc sin ser certificados son auntenticos cronometros los mios no pasan de 1 un segundo dia o mas 2 tengo el omega seamaster certufucado cosc y oor metas omega calibre 2500 coaxual y anda un poco por encima de mi h10 y aora digo mejor orueba cosc que ouede realizar el duelo de un reloj llebandolo dia a dia y sometindo a todo no hay ni cosc ni metas y otra pregunta si este calibre lo daca al mercado breintlig o rolex o te lo meten rn un omega o dn un zenit la gentr cuanto pagaria por ellos lo que pidiera ka casa 7 8 10mil euros y seguro que los vendian como rosquillas y serian lo mejor de lo mejor

@watchalot919 2 жыл бұрын

Doesn't look like any powermatic 80 movement I have seen

@_Napoletano_ 2 жыл бұрын

Eta wants you to send your watch off to them for service. There is no other reason for that balance to be designed that way.

@hapdane5938 2 жыл бұрын

No. All the best calibers made by companies like Omega and Rolex have a free-sprung balance system because it adds more precision to the caliber. It's an upgrade, despite all the rumors about Powermatic 80 that you can read online.

@_Napoletano_ 2 жыл бұрын

@@hapdane5938 we'll have to agree to disagree. Ive been working on mechanical watches for long enough now to know that oh though you can be more precise with adjustments on a prespung system, a regulator can be as accurate as a presprung balance. I have chronometer grade watches in my collection with both. Only difference is the regulated movements are easier to service. Eta just as rolex and omega make huge profits from their servicing department. Free sprung is not a huge difference maker in accuracy or reliability like say for instance adding a silicon balance spring.

@han7902 2 жыл бұрын

The cosc version is not regulateable...

@han7902 2 жыл бұрын

I got one of those. When time come to regulate, it is time to buy a new one I guess. That is why it's price is dirt cheap in gray market...

@diegocontreras9563 2 жыл бұрын

why not? doesn't have the regulation pins?

@han7902 2 жыл бұрын

@@diegocontreras9563yes but regulating means stop the spin wheel, adjust the pin on the wheel a bit, put the wheel back, test again, over and over. The cost will go up significantly, and with much bigger risk of damaging the parts. For the cost of the watches, it is totally not worth it.

@diegocontreras9563 2 жыл бұрын

@@han7902 thanks for your input. Your point then is, that to get to COSC accuracy, many spin wheel stops are required, hence longer time and higher risk of damaging the parts with the tiny screwdriver, did I get it right?