Great job man, really helps the regular dudes out there who may not have all the fancy tools. Shows what you can get done when you need to get $h!t DONE!

Great vid, especially for beginners! Much appreciated for my ram air install.

Thank you so much for this. I legit couldn't find anything for 17 and up fusions. Thankkkk youuuuuu

This helped me a ton. Thanks man.

Doing grille and Velossa Bigmouth this weekend,this will serve as reference.Ty!

I replaced my grill with a OEM Ford part. I did not totally remove the bumper, it looked to be too much of a pain to unhook all the wiring. I just unsnapped the tabs holding the old grill on and slid the new grill back on to those same tabs. Easy peasy. The video did help with the screw/fastener locations.

Your video surely helped. I got my grille on today. Man, that passenger side angle bracket with the window wash tank right there is a pain in the ASS. Great video, dude! Thank you

Great video thanks, how many sensors are there in the bumper?

Great video. I got my grill replaced, but having challenges on the drivers side with those two hard to reach screws. They don’t want to tighten all the way leaving a 1/2 in gap in the quarter panel seam. Have you run into this challenge? I’m baffled. Thanks!

How long did you fight the clips that held the grill to bumper .😊 great video

My car is different, but nonetheless i appreciate how clear this guide was

Yo can you show how you fixed the hood sensor, what cable was mismanaged and what did you do to fix it

Does anyone know if the Ford Fusion front bumper from a 2017 will fit on the 2015/16 Fusion? I'm thinkin on buying the 17 bumper so I can upgrade my 2015 front bumper (just for the look of the square fog lights)

What size sockets did you use?

great job on the video, can you do a video showing how to take off the passenger fender.

Like vid great info on how to Thanks

Great video dude

R u in houston

I just got a 2019 titanium and wanna do a black grill replacement like this. Any recommendations on where I can find one for 2019? It seems like that year's parts are a lot harder to come by than 2018 and older

Planning on doing this to a 2017 soon but I have a few questions. For tools do I only need a philips head, flat head, 5-15mm socket wrench, and 8-10mm sockets? And for the sensor issue you had. Will everything be fixed if I make sure it's all plugged in before re installing?

Leave 2 screw on the top when doing the bottom so it don't drop on u lol

Thank you so much for this

Hey, I'm planning on installing a honeycomb grill myself and I was wondering what tool set you use for the screws

Where exactly would the “hood sensor be located” mine pops up all of the time and I bet it’s for the same reason as yours. I’m getting ready to take my bumper off in a few days!

Link to those fog lights?

THANKIOU❤❤❤❤❤❤❤❤❤❤❤❤

There is also a damn fastener in between those 2 bolts holding the bumper on closer to the headlight

I had to take the bumper off my 17 to replace a smashed grill today. Watched this video about 5 times beforehand. Got everything put back together, started the car...."HOOD AJAR". Dangit! Luckily managed to get to the connector through the wheel well without having to completely remove the bumper.

When it came to the bracket connected to the fender and bumper did you pull it off? if so from what angle?

Do you have a link for that black grill? Id like to get the same one. Great job on this vid!

Why not do the bottom ones first?

So have to remove bumper if I want to change front grill?

I literally just want to put a lightbar, why is Ford so difficult

Wow... That was some pretty technical stuff 😂

Will this work for 2019 does fusion?

What socket u use

Does this work for a 2016?

Anyone know how to fix u0284 code

Here I am trying to yank off the bumper those 4 bolts were there.... Once I took them out boom came right off

Is this the same for a 16?? Also when you pull the bumper off is there room to disconnect all the wires? I saw another video where he removed the cover under the car to disconnect everything before he pulled the bumper, but that looks like a pain in the ass lol

Will this fit on a 2019

what headlights are those

can u list the tools you used for all the screws and clips

I take it this is the mondeo just with a different name ( Americas version haha)

You could have shown the bumper being removed all the way, that would have been a good visual.

Bruh that right bumper bracket screw got me pissed af.

Where u live lol I need to drive to ur house so u can do my front bumper lol ill pay u hehee need to install new headlight assembly

You didn't even show where the other screws were or how many they were nice

will this work on a 2015?