How to Remove a Mustang Spindle

No video

How to Remove a Mustang Spindle

Рет қаралды 6,918

Күн бұрын

How to remove a Mustang spindle. This shows how to remove a Fox Mustang Spindle, but SN95 is the same. How to remove a 1979-2004 Mustang spindle. Mustang spindle replacement. Shows how to separate the spindle from the lower ball joint.

Пікірлер: 13

@steamy1225 2 жыл бұрын

You forgot to mention to support the lower control arm with a floor jack before removing the strut bolts.

@Mustang-Geek 2 жыл бұрын

Good catch! Let me see if there is a way to add that to the video without reposting.

@jaredhill313 Жыл бұрын

how can I do this safely at the junkyard? any suggestions? no jacks allowed into the yard.

@Mustang-Geek Жыл бұрын

@@jaredhill313 Good question. Maybe use a block with a rope attached. Pull the block out when all the bolts are removed.

@johnnybobgoldstein2823 2 ай бұрын

@@jaredhill313will the spring fly out or something? Can’t you just remove it all without lifting the control arm?

@885.0ELopez Жыл бұрын

I don’t have power tools only have hand tools can i still get the job done ???

@Mustang-Geek Жыл бұрын

You can use hand tools, but the strut top nuts are going to be difficult.

@885.0ELopez Жыл бұрын

From what points do you have the car lifted from ?

@Mustang-Geek Жыл бұрын

The front subframe near the control arms.

@jakub584 Жыл бұрын

Hi there I just noticed looking at your coil springs, does the bottom pig tail of the coil spring not fully seat in the perch when there is no weight and if the car is in the air because mine does that with after market coil springs and in the video it looks like yours does too, just wanting to make sure I’m not the only guy that has that.

@Mustang-Geek Жыл бұрын

Very likely.

@jakub584 Жыл бұрын

@@Mustang-Geek did you ever have any problem with the coil spring or no

@Mustang-Geek Жыл бұрын

@@jakub584 No. If the end of the coil is clocked correctly, don't worry about it.