How to remove a prop without a prop puller! (HHT Ep1)

Рет қаралды 21,841

3 жыл бұрын

This video is the first video of my "Hayden's How To's" series where i show you How to do basic maintenance on your boat. In this video i show you how to remove your prop with or without a prop puller.

Пікірлер: 11

@haydenfoy5723 3 жыл бұрын

Check out my refit play list here! Sailboat refit diesel heater: kzfaq.info/sun/PLEI-x8-OSztCPyUn_2mLwi0JzwzjunWaN

@oddjobbob8742 10 ай бұрын

For anyone interested, that prop puller is called an Algonac Prop Puller. It is sometimes called a Minderman Prop Puller. There is a KZfaq somewhere about the same puller being used underwater. Make sure you have a line tied to the puller or you will have to search for it in the mud and gunk under the boat.

@danpease8395 3 жыл бұрын

Nice crescent hammer!

@haydenfoy5723 3 жыл бұрын

Thanks! Lol anything can be a hammer

@romandybala 3 жыл бұрын

Two questions from the start of the video. If the pin you took off the shaft to allow the nut to come off is called a "cotter pin", what do you call the bolt that used to hold the pedals on the crank of a bicycle in the old days? The stright sided bolt with no head and a taper on one side to wedge against a flat on the crank axle. Secondly, if thats a cotter, what is a split pin? AH, JUST GOOGLED IT. ENGLISH AND AMERICAN USAGE DIFFER. CHEERS

@lloydweems6237 Жыл бұрын

I usually use heat even with a prop puller, it just works better.

@elisalyles1466 3 жыл бұрын

why not heat prop when using puller? and how to install new one? where's the 2nd nut?

@haydenfoy5723 3 жыл бұрын

The prop puller is much stronger then the static friction of a cold prop, so no need for heat. The new prop you just slide onto the shaft with the brass key and tighten the two nuts down tight, and dont forget the cotter pin!

@learemington1700 3 жыл бұрын

Would have been nice if had been lighted from the camera side but we got the idea in silhouette. Second prop was better

@leonelrivera6535 Жыл бұрын

Cual es el precio de una propela así?

@oddjobbob8742 10 ай бұрын

If you’re asking the price of the prop puller it’s about $400 USD. It is called an Algonac Prop Puller. It is sometimes called a Minderman Prop Puller.