How to remove a taper lock pulley

Рет қаралды 34,749

Small town machine shop

4 жыл бұрын

Today we remove a taper lock on a pulley so we can do the bearing repair on a mower spindle

Пікірлер: 34

@steveperuski5547 Жыл бұрын

I am on a roof right now. It’s a little chilly and I needed a little guidance. Thank you very much. Our exhaust fan has the exact same issue. Great video.

@smalltownmachineshop6860 Жыл бұрын

Thanks and I’m glad you found it useful

@micahwagner4154 2 жыл бұрын

you just saved me, I was trying to run mine off with an air hammer and it would not go. I was thinking that there has to be an easier way to get one off, and this works flawlessly. thank you!

@zerogearedfilms397 Жыл бұрын

Thanks for taking the time to help us out!

@1973ktully 9 ай бұрын

Thanks for the video. It will help me with an exhaust fan at work.

@smalltownmachineshop6860 9 ай бұрын

I’m glad you found it useful

@fuelfilter Жыл бұрын

Thank you! This worked! I was able to remove a split tapered bushing on a 3hp compressor motor shaft and install on the replacement motor.

@smalltownmachineshop6860 Жыл бұрын

I’m glad you found it useful, thanks for watching

@VincentArdolino 5 ай бұрын

Awesome…Thanks for this simple explanation.

@kevintaylor8832 2 жыл бұрын

Thank you, looks just like my splitter pulley I need to remove. Helpful

@smalltownmachineshop6860 2 жыл бұрын

I’m glad you found the video useful

@hubert187 3 жыл бұрын

If only I knew this 3 days ago... I wouldn't have used a bearing puller. Live and learn! Sharing with my friends.

@smalltownmachineshop6860 3 жыл бұрын

Glad it helped and thanks for watching

@cpuram8883 Жыл бұрын

I think its hard to install back on

@h20doctor Жыл бұрын

What if you don't have the bolts ... ? In other words I had one bolt sheer off doing exactly in this video so cuz the only way to get it off with the bolts or can it be pulled off some other way ? The key Pin , or Shaft pin needs to be all the way forwards, or has to be completely removed coming Forward off the motor shaft spline

@smalltownmachineshop6860 Жыл бұрын

Did the bolt sheer while removing it, unfortunately that happens pretty often, if you still have one bold able to push you can use a wedge on the other side and tap it in as you push with the other bolt

@virgil5361 11 ай бұрын

Does anyone know how he removed the pulley? I did not see how he did it, He called this how to remove the pulley but he never actually showed how to do it. Does anyone know what type of tool he could have used since he did not show us what tool he used?

@smalltownmachineshop6860 10 ай бұрын

Do you mean the part where the belt rides which I clearly showed or the whole spindle assembly

@philliphall5198 Жыл бұрын

It’s best to run a tap and clean treads before trying to use pusher bolts

@johnstrange6799 4 жыл бұрын

Need that separate video. It's a slow night for videos lol

@smalltownmachineshop6860 4 жыл бұрын

Lol, I had to end up ordering a part for that mower so it will be a bit.

@jackhosey8634 Жыл бұрын

Show how to get the other piece off without a puller.

@smalltownmachineshop6860 Жыл бұрын

You can use wedges between the two pieces, I will see if I have a pully laying around and do a video on alternate methods

@pastorbrian700 3 жыл бұрын

How do you remove the double pulley

@smalltownmachineshop6860 3 жыл бұрын

The one on the back of the deck

@pastorbrian700 3 жыл бұрын

@@smalltownmachineshop6860 I was referring to the center spendle pulley on a 3blade deck (scag sthm 52"cut). I have since figured it out though. Thanks for reply..🙂

@keithadkins1834 Жыл бұрын

I was able to get it off, is it easy to get back on being tapered?

@smalltownmachineshop6860 Жыл бұрын

Yes, just make sure the threads are clean and draw it back on evenly moving back and forth between the bolts, I start the pully just slightly low as it will usually pull up a little

@keithadkins1834 Жыл бұрын

@@smalltownmachineshop6860 Sweet, thank you!