How to remove and clean LG washer machine filter

Рет қаралды 452,236

Күн бұрын

In this video I wanted to share how we maintain and clean our LG washer (top loading) machine filter. I hope you find this video to be helpful. I personally repeat the process twice a year. If you do like it please consider liking it and subscribe to my channel. Thanks for watching!
Manufacturer: LG
Model: MEZ41911003
Replacement cap part #: MBL65219301
Amazon link to order spare center cap: amzn.to/3N2rKTi
#LG #howto #remove #filter

Пікірлер: 496

@SOBIsHobbies Жыл бұрын

The replacement cap can be ordered at this Amazon link should you need one: amzn.to/3N2rKTi

@themoroskyfamily9586 11 ай бұрын

How can you take the big wheel out after you take the bolt off we are having a hard time

@TeddyH79 10 ай бұрын

@@themoroskyfamily9586I'm sure you figure this out by now, if not in my experience it's a two-handed pole so you're not adding pressure on one side and not the other. Be careful, on the inside is a metal lip that is quite sharp. I cut my finger pretty good.

@GuyTriesDIY 9 ай бұрын

@@themoroskyfamily9586did you get yours out?

@slappy1965 9 ай бұрын

@@themoroskyfamily9586 I had a hard time too. It didn't pop out like the video. I found it eventually came out easier as I rotated the drum to find a sweet spot, when it eventually came out. Very helpful nonetheless. Thank you @SOBIsHobbies

@SOBIsHobbies 9 ай бұрын

Thank you for your input!

@texastinyliving Күн бұрын

OMG I think we are the only people in the world to have this washer. I couldn't find another video about this. I haven't ever cleaned this out and after months of me begging husband to do it, we did and IT WAS FREAKING DISCUSTING. No wonder why my clothes never smelled good no matter what I bought. THANK YOU SO MUCH for doing this video!

@SOBIsHobbies Күн бұрын

@@texastinyliving Glad I could be of help. Thank you for watching my video. 🙏

@leannesliva6550 11 ай бұрын

I had the same problem as many other people. I could get the cap off, get the screw out, but the washplate wouldn’t budge. However, I just got it out, and here is how: I poured about two cups of vinegar in there and let it sit an hour. I read all 195 of these comments and there was ONE comment that helped me by @kulasnikov3875 and it was to add screws. So I found two #8 ceiling hooks and screwed them into the center plastic existing holes firmly (not the metal), and then gripped those hooks with pliers and pulled straight up. The reason it wouldn’t budge is because there was so much gunk underneath the washplate. Hope this helps you. Good luck.

@heyou429 9 ай бұрын

I initially struggled when trying to pull it out with one hand. But as soon as I used both hands (backhanded from the center) it lifted out easily.

@bar8665 6 ай бұрын

@heyou429 if anyone is reading this in the future and has the wt901 model, you can't pull it out like this guy in the video. There's nothing to grab really. I was able to get it out using two pliers.

@polishprinceproductions5923 5 ай бұрын

Before you follow @leannesliva6550 instructions. Just pour 2 cups of vinegar in the tub and run it on tub clean mode. That did the trick and made the large silver disc to come loose

@david3370 3 ай бұрын

skipped the vinegar step and did 2 pliers with a strong pull and came right off

@debracarter9935 Ай бұрын

So...90% of our washable shower curtain liner got caught under this plate due to [we assume] the little metal weights sewn in it; lesson learned. My husband and I have 34 years of marriage under our belts and have lived in this same home for 30 years. Yet here we are, hovering over our 4 year old washing machine, one phone being used as a flashlight the other here on KZfaq, looking like Bert and Ernie from Seseme Street, trying to solve [what should have been] a simple problem. 😅 (Glad to see we're not alone having this issue!) ...ok I'm off to get the vinegar. Thank you for the tip! UPDATE: ...VINEGAR WORKED!!!!!😮 WOW!!!! 😃 You don't need a lot, either. (Turns out my vinegar stash was low - I only had about 2 cups worth.) I carefully poured the [about an ⅛ cup equivalent] vinegar around (but not in!) the center hole where the bolt sits. You could do this before even removing the bolt. We waited 50 minutes (because we're impatient) and with a few gentle tugs-it came straight out! ANOTHER TIP: This may be an already-known suggestion - but we used (don't laugh) weed whacker line as the means to pull the plate up. We were afraid of damaging the plate so we wanted to be as gentle as we could be. Being plastic, I didn't think it was gonna be strong enough, but it thread through the 3 holes just fine. I tied a square knot (tension held it together once I started pulling) and, putting the screwdriver underneath the knot, I used it as a makeshift handle to pull up the plate. I suppose it didn't snap because the force was distributed equally between the holes. Washing machine is runnin' just fine in the background as I type this. 😊

@CoryFalde175 23 күн бұрын

Thanks for this. Our mystery of the black specky stuff on our clothes is solved.

@SOBIsHobbies 23 күн бұрын

Glad my video was helpful. Thank you for your feedback!

@kdtcid Жыл бұрын

I can’t thank you enough for posting this video. My laundry was funky! I put the cleaning tablets in the tub, clean the filters on the hose inlet valves, and nothing worked. For like a month. I thought I must’ve been missing another filter somewhere but the tub looked like one piece. I had no idea this wash plate was removable until I saw your video. I’ve owned this machine for about seven years, so you can imagine what I found under the wash plate! It took me about an hour to get all that gunk cleaned out of there. I’m running another cleaning cycle in the tub, now that the gunk is out. I can’t wait to re-wash all these funky clothes!!!! Thank you!

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!! I’m very glad if my video helped you. Have a happy holidays!!

@mannyg2145 Ай бұрын

I've had this machine close to 5 years and followed your tutorial, awesome. Yes, I did the same thing and broke the little tab but ordered 2 on Amazon for $16 👍

@SOBIsHobbies Ай бұрын

I know, those caps are quite flimsy and can easily break even with a minimal effort. 😅 But I’m glad that everything else worked out for you. Thank you for your feedback!

@89albion Жыл бұрын

Extremely helpful video. Also, I used three pair of fingernail clippers. I inserted the rounded but sturdy metal lever into the initial cap's three openings. With the fingernail clipper lever straight down, it did not break anything, but was sturdy enough to very easily lift up that round center cap.

@SOBIsHobbies Жыл бұрын

That’s a great tip! 👍 Thank you for sharing your experience.

@ckel6676 6 ай бұрын

Excellent video. Knew the cap came off, but unsure how to remove without breaking. Your video made the clean out easy. Thanks. Now if only LG had put this in the manual; or, designed the machine for easy cleaning…

@SOBIsHobbies 6 ай бұрын

Thank you for your feedback. Have a happy holidays!

@chrisconnors8513 4 ай бұрын

Designed not to be easy so you call a tech. Same with cars (except Toyota)

@johncasor9698 22 күн бұрын

JUST USE THE CLEAN TUB CYCLE OR HAVE A 5 YEAR OLD LEARING TO READ SHOW YOU HOW TO READ...

@Zeach. 20 күн бұрын

@@johncasor9698doing that right now, updating you to see if that worked

@periwinklesue 3 күн бұрын

There is a slot on the side of the cap (not the holes on the top that he used). Slide a flat head screwdriver in that slot and pry it up. You’ll have a better chance of not breaking it. No guarantees though.

@perrisfrances 4 ай бұрын

So happy to find this video. Been so frustrated with the streaks of lint I find on our clothes. It was a mystery till now!!

@SOBIsHobbies 4 ай бұрын

Thank you for your input. 🙏

@zachkatz-springer5426 5 ай бұрын

Very helpful tutorial. Was able to complete this on my own washer from start to finish in under an hour. The tips to ensure safe removal and re-installation were clutch.

@SOBIsHobbies 5 ай бұрын

Thank you for your feedback.

@teragramlane6665 8 ай бұрын

I like the added details you provided as you went through the process. Well done.

@SOBIsHobbies 8 ай бұрын

Thank you for your positive feedback!! 🙏

@Mommii517 6 ай бұрын

Thank you! Your video was simple and right to the point. I was doing laundry and got some hair pins down there. Thanks so much!!!

@SOBIsHobbies 6 ай бұрын

I’m glad my video was helpful. Thanks for your feedback.

@pcecilone3 2 ай бұрын

This was SO much more helpful than the manual! Ant thank you for the suggestion to clean periodically with backing soda & vinegar. You and your wife make a great team! :)

@SOBIsHobbies 2 ай бұрын

Glad we could help! Thank you much for your kind comment! 🙏😊

@surgicaltechcrafter2169 Жыл бұрын

Thank you so very much. We gutted our laundry room and redid it but before putting my machine in I followed your tutorial and whelp I broke one of the pins off the cap, ordered a new one off Amazon and it came the next day. Rest was smooth sailing and after years of washing it was filthy but I used the Dawn power, qtips, scrub brush and scrubbing lysol wipes and cleaned perfectly. Threw in a washing machine cleaner after putting it back together and it's literally like I just bought a brand new smelling washing machine.

@SOBIsHobbies Жыл бұрын

I’m glad it worked out for you. Thanks for watching! And enjoy your “new” washing machine. 😊🤙

@yeah112358 Жыл бұрын

Thank you so much for posting this!!! We are not mechanically inclined, but your video made this fairly easy. We just did this today. The machine is 10 yr old and we weren't good about cleaning it. OMG, the gunk in there!!! We followed your steps exactly and managed not to break the plastic cap piece. We thoroughly cleaned what we could and put it back together. The only thing is that, you will likely inadvertantly loosten some dirt underneath the metal piece and not be able to reach it. So after you do this cleaning, I recommend baking soda and vinager runs. And then a clear water run. I think after that, we should see a big improvement. After this, we will be washing the washing maching every 2 weeks!! Thanks again!

@SOBIsHobbies Жыл бұрын

I’m glad my video was able to help you. Thank you very much for your feedback!!

@1love4life 6 ай бұрын

Thank you for this tip. I have been looking for anyone with the model of washer that I have and found your video. I will be using all the tips in the comments along side with your video. Wish me luck. Thank you so much

@SOBIsHobbies 6 ай бұрын

Good luck! 😊 Don’t hesitate to ask if you have any questions. Thanks for watching!

@ninaricci899 11 ай бұрын

Thank you for this video. We were able to clean out our washer with your help. we did have trouble with the wash plate like others mentioned but I added some vinegar as someone suggested and let it soak a bit and then between my husband and son's strength it came out. thank you again.

@SOBIsHobbies 11 ай бұрын

Thank you for your feedback! I’m glad it worked for you!

@rajeevjosh Жыл бұрын

Thank you for the video. I have been waiting for something like this before I opened up my washer to figure out the issue. This made it really helpful. Appreciate your efforts

@SOBIsHobbies Жыл бұрын

Thank you very much for your feedback!! Have a great holidays!!

@rajeevjosh Жыл бұрын

Also wanted to check for how long can we keep baking soda and vinegar in the drum before we rinse it? There is still some residue left between the metal and plastic and we want to make sure the soda mixture doesn’t impact the metal/plastic permanently. Please advise.

@SOBIsHobbies Жыл бұрын

@@rajeevjosh great question. 👍 I would say couple of hours should do the trick. But then again I doubt it’s going to be possible to get rid of all the sludge that’s been collected. I found this replacement cylinder on Amazon: UPGRADED Lifetime Appliance AGZ72909711 Washplate Pulsator Assembly Compatible with LG, Kenmore, Sears Washer - AGZ72909702 a.co/d/cuuw9k0 I haven’t ordered one yet. We’ll try to use our current one as long as we can. Once it reaches to the point where those residues become impossible to remove at all then I’m going to order this new one to replace it. Please make sure that it will work with your washing machine model before ordering one should you be interested. Hope this helps.

@dennisrabe8879 2 ай бұрын

Just a small tip for removing the plastic chrome cap. There is actually a small notch on the side of the cap. You can feel around it and when you find it, you can then put you screw driver underneath it and it will easily pop right up. Not having to worry about breaking a tap. Hope it helps with adding to your vidio.

@SOBIsHobbies 2 ай бұрын

Thank you for that advice! 🙏

@rosaagarc Жыл бұрын

Thanks so much, very helpful! It fixed the problem I was having with my LG leaving lint on my clothes 😊

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!!

@anthonydahl5454 5 ай бұрын

Thanks ! really great video ! My plate was really dirty. This will help so much ! Also grateful for the recommended monthly cleaning cycle, i did not know about it !

@GregB-pg8lh 20 күн бұрын

Thank you very much, particularly for the tip and honesty about being careful not to damage the cap. I'm sure that has saved many of us in having to get a replacement part.

@SOBIsHobbies 20 күн бұрын

Glad I could help. Thank you for your feedback!

@amandabarrow7360 Жыл бұрын

Great video. Our is 11 years old and never had a deep clean like this. Just getting the cap off was a struggle. It was vile underneath. 🙈 We couldn't get the main plate off after removing the bolt so I may try to soak some vinegar and baking soda oneday after a tub clean. This machine is a soldier.

@SOBIsHobbies Жыл бұрын

Thank you for your input and positive feedback. 🙏

@DianaLR27 9 ай бұрын

Thank you so much! I have an LG washer with the exact drum and appearance as yours. It has a different model number, but I’m sure I can clean mine the same way. I appreciate you sharing your video and help!

@SOBIsHobbies 9 ай бұрын

Thanks for watching! 🙏

@billboyer1167 Жыл бұрын

Great video. His advice worked perfectly. His advice is easy to follow and complete. Surprising amount of dirt accumulated that I was able to remove. If you have an LG washer in your house, you need this video.

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!! 🙏

@bettypatterson280 Жыл бұрын

Thank you so much,your video helped us alot

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!

@user-ux8fn4ph3c 2 ай бұрын

Thank you so much for posting this. I've never found another post with the same washing machine as mine. Thank you❤. Mine hasn't ever been cleaned....so adding to hubby's honey do list now❤

@SOBIsHobbies 2 ай бұрын

You’re welcome! I hope this video will help cleaning your washing machine. 😊

@claudiamcclenen3161 Жыл бұрын

Followed your tutorial and it was very helpful! Keep up the good work !!

@SOBIsHobbies Жыл бұрын

Thank you!!

@rzinindiana8029 Жыл бұрын

Thank you SOOOOOO much. Now I am confident I can FINALLY clean the smell!!!!

@SOBIsHobbies Жыл бұрын

Thanks for watching!

@dealzguyYT 5 ай бұрын

Fantastic video bro! Have a similar model, but same drum and inside arrangement. The plastic hub cap has three small prying tool insert cuts in it. I didn’t know about that before watching this video. But I took picture using the phone too get a closer look. So I didn’t use the water draining slots you used to pry it out. Luckily I broke nothing. But thanks a lot for this video!

@lynnlewis4307 Жыл бұрын

Great video. Appreciate your detailed instructions and tips. Thank you for posting this.

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!

@kimthevaos5579 Жыл бұрын

Thank you for this video! I've looked many times for a way to clean the washer and was so excited to find your solution. It was so satisfying to get all that junk out. Here's hoping for cleaner clothes!!

@SOBIsHobbies Жыл бұрын

That’s an awesome news! I’m glad you found the video to be helpful. Thanks for your feedback. Have a happy holidays!

@YellowCyan2 Жыл бұрын

Help once I removed the bolt,O-ring & washer I can’t take that big round thing out.

@SOBIsHobbies Жыл бұрын

@@YellowCyan2 you’re just going to have to pull it harder straight upwards. As long as you removed the bolt and the washer there shouldn’t be anything else that would hold the bottom piece. It should come off at that point.

@YellowCyan2 Жыл бұрын

Thank you!!! I'll keep trying!!! My washer is 4 years old

@SOBIsHobbies Жыл бұрын

Ours was 5 at the time of this video. 😅 I did have to put some effort to get that piece out too. So don’t be too annoyed about it. After extensive use for several years some times they get stuck and whatnot. Just be patient and do your best. Good luck!

@dondongo4036 Жыл бұрын

Thank you so much for uploading the video. This will really helps us remove the wash plate of our washing machine. Although we differ in the model but we have similar wash plate. ❤👌🏼

@SOBIsHobbies Жыл бұрын

Thank you so much for your kind feedback!!

@baristart123 10 ай бұрын

Thanks for posting. I truly hate our LG washer. It’s ruined some of my clothes and we have to manually add water to it before we close the lid, otherwise it barely uses enough water to actually clean our clothes. Wish the just made washing machines like they used to.

@ChrisConley1 3 ай бұрын

They do but they cost $1400 not $600

@wendybmore 2 ай бұрын

Not sure if you’ll read this. I was having a water level issue as well. So puzzling, but I found that if I use the “bulky cycle” with the “ cold tap water” option, it fills up. I’m new to this machine so I’m still experimenting but that’s one of the ways I found to get a good was in.

@Diane-su3rj Ай бұрын

I would never buy an LG again

@assseteener 8 ай бұрын

Thank you for this. Helped us clean and remove an errant coin.

@SOBIsHobbies 8 ай бұрын

Glad my video could help you. Thanks for your feedback!

@pattym8000 Жыл бұрын

Thank you for all the details!

@SOBIsHobbies Жыл бұрын

Glad you found my video to be helpful. Thanks for watching!

@debbiejohnston8210 Жыл бұрын

Thanks so much for posting this. I've been so frustrated with my machine, no easily accessible filters & doesn't leave clothes as clean as my old machine (that was made in the olden days, no plastic, built to last)

@SOBIsHobbies Жыл бұрын

Thanks for your feedback!

@FRANKFAJARDO2691 3 ай бұрын

We have the same type of LG stainless steel drum but ours is in Turbo Drum. Done exactly what you did. Thanks for your video Bro. It's a great help.

@SOBIsHobbies 3 ай бұрын

You’re welcome. Thank you for your feedback!

@Koko-qs8zx 5 ай бұрын

Thanks dude, I had different model but you’re right relatively the same. My biggest problem was pulling the filter from the spindle spline. I kept grabbing the raised part of the plastic filter albeit not much to grab onto. Kept at it and finally pulled it off with my hands….

@Toni54Q 10 ай бұрын

I clean my tub on the Tub Clean cycle once a month with Fresh Tab for washers. I will check this out and see how mine looks. Thanks for the video.

@sarahfarnsworth8488 3 ай бұрын

How do you run a tub clean cycle?

@cecileellison8164 3 ай бұрын

Thank you for your video. It really helped me be able to clean my machine myself.

@SOBIsHobbies 3 ай бұрын

You’re welcome. And thank you for your feedback!

@user-od9rk8nl9k 7 ай бұрын

This was very helpful and detailed. Thank you

@SOBIsHobbies 7 ай бұрын

Thank you for your feedback!

@LisaRatta-Shoshan Ай бұрын

Soooo helpful!! You are the best! Your tips helped me to not make the same mistakes. Thank you!!!

@SOBIsHobbies Ай бұрын

Thank you for your kind feedback!!🙏 Glad I could help. Have a great one!

@pearlarzabal3473 10 ай бұрын

Omg I’m getting the brown flakes too. If the brown flakes smear it looks like crayon marks/stains. Just horrible when it happens to my white sheets & clothes. I just found this video and am sharing with my husband to give it a try. Thank you for the video @SOBIsHobbies !

@SOBIsHobbies 10 ай бұрын

Thank you for watching! Feel free to leave your feedback once you give it a try to the process. 😊

@JA-ds6cl 11 ай бұрын

Thank you cleaning this helped our problem with agitation 👍

@SOBIsHobbies 11 ай бұрын

Thank you for your feedback!

@williamcraig9271 Ай бұрын

Your video displayed the gunk only at the center around the bolt. When I removed the washplate, the metal "starplate" had gunk and grit on the spokes as well. I sprayed it liberally with Dawn and let it soak while I thoroughly cleaned the bottom of the washplate, center hub, and bolt. Afterwards, I used a plastic scraper to clean the metal starplate, removed as much of the gunk from the starplate and thoroughly rinsed the tub with water, (the tub drain hose was removed to hopefully flush any gunk/debris I couldn’t physically remove. I'm assuming there is no screen at the tub outlet as I've had to disassemble the drain pump to remove paper clips and tie stays from the drain pump a few years ago.

@Breezy1522 7 күн бұрын

you saved me from buying new washer lol thank you for the video!

@SOBIsHobbies 7 күн бұрын

Glad I could help. 😅 Thanks for watching!

@Marty1776. 7 ай бұрын

I had the same problem with getting the large top plate off as it was stuck. I seen a KZfaq short video in which the person ran a tub clean cycle with the plastic cap and screw removed. I did exactly that and midway through the tub clean cycle the plate came up and started floating in the water. No need for screws or pry tools, etc. I just let the cycle finish without the plate inside and cleaned it up and followed the rest of the steps in this video.

@SOBIsHobbies 7 ай бұрын

Thank you for your input!

@maryjanesowinski4140 7 ай бұрын

Thank you for this helpful tip!!! This worked perfect for it to come loose!!!

@MommaHair 5 ай бұрын

This is the comment I was looking for. I am trying the same thing and decided to look and see if anyone else had the same idea. Glad to know it might work!! Cheers!

@kriss7038 2 ай бұрын

Thank you for the advice. Its work perfect !!!

@Adam_G_Alsop 2 ай бұрын

I will give that a try. I've done EVERYTHING to try and get the PULSATOR loose, with no success at all. Also, it would seem to me, that if you can run the unit with the bolt REMOVED, then they're is really no need for the blue LockTight.

@amberrrlove6217 5 ай бұрын

This is exactly what I was looking for

@adriennet.cooper3823 Жыл бұрын

Thank you for posting this.

@SOBIsHobbies Жыл бұрын

Thanks for watching!

@sanahmohammadi7262 Жыл бұрын

Thank you so much for sharing this video with as it's help me a lot ❤

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!!

@gfredrick123 3 ай бұрын

Thank you, your video was very helpful!

@SOBIsHobbies 3 ай бұрын

Thank you for your feedback!

@tonyanoss8059 6 ай бұрын

Great explanations and will be doing it tonight.

@SOBIsHobbies 6 ай бұрын

Thank you for your feedback.

@djgoodot Жыл бұрын

Thanks for this video bro I definitely appreciate it

@SOBIsHobbies Жыл бұрын

You’re welcome! 👍

@sanjoriot 2 ай бұрын

To get the first cap off I found putting a flat head into the slot and working my way around using all three slots helped. I have a tug at one slot and then moved and worked it loose that way. No damage to the cap

@SOBIsHobbies 2 ай бұрын

Thanks for sharing that tip! 👍

@lima2141999 6 ай бұрын

Very helpful, thank you for the video.

@SOBIsHobbies 6 ай бұрын

Thank you for your feedback. Happy New Year!

@user-tb2qg8dc7g Жыл бұрын

Very helpful--thank you!

@SOBIsHobbies Жыл бұрын

Thanks for watching!

@jacobdavis2232 3 ай бұрын

Super helpful; thank you!

@SOBIsHobbies 3 ай бұрын

Thanks for your feedback!

@yettaloyd507 8 ай бұрын

Thank you for your careful explanation

@SOBIsHobbies 8 ай бұрын

Thank you for your feedback! 🙏

@JANELLESOLANO-xs5xn Жыл бұрын

Thank you that was a great video.

@SOBIsHobbies Жыл бұрын

Thanks for watching! I’m glad if my video could help.

@mariodelvalle9572 Жыл бұрын

Thank you for your video...very helpful. God bless

@SOBIsHobbies Жыл бұрын

Thanks for watching!! 🙏

@Nounny Жыл бұрын

Thanks so much for sharing. Just clean what you showed and let’s hope everything will be good.

@SOBIsHobbies Жыл бұрын

You’re welcome! Hope it helps. Don’t hesitate to ask if you have any questions.

@ritarevell7195 10 ай бұрын

One thing I rarely see discussed is that I leave my washer door open, until it’s dry. I don’t actually close it when it’s a top load washer. It keeps the machine from getting that funky smell when the moisture causes mildew. And I use vinegar as my rinse agent. I never use fabric softener or dryer sheets in my machines. I find that using vinegar in the rinse cycle, means my towels and such are cleaner and the fabric softeners don’t build up on the fabrics. The towels stay absorbent, and the vinegar smell doesn’t hang around.

@crazeelupz 2 ай бұрын

May I ask how much vinegar you use per load? I was told to be careful, something about vinegar corroding the hose. 🤷‍♀️

@ritarevell7195 2 ай бұрын

@@crazeelupz About a 1/2 cup per load. The vinegar is actually just getting the last of the soap out, so it's not hanging onto the material.

@crazeelupz 2 ай бұрын

Thank you so much!!!

@kylekauffman7771 3 ай бұрын

Just did this but instead of screws I used a couple small allan wrenches and vice grips! It was stuck wiggling back and forth was more effective than pulling hard!

@djsteelwheel6795 Ай бұрын

Thanks!! Keep up the good work!

@SOBIsHobbies Ай бұрын

Thank you!! 🙏

@nbanolfkid 2 ай бұрын

Nice video. Thank you!

@SOBIsHobbies 2 ай бұрын

You’re welcome! ☺️

@geraldashby8887 Жыл бұрын

Ours is 4 months old and was getting funky. Cleaning tabs etc did not help so a BIG thank you!

@SOBIsHobbies Жыл бұрын

👍

@michaelvandervorste4123 7 ай бұрын

Thank you. This helped.

@SOBIsHobbies 7 ай бұрын

Thanks for your feedback!

@lor520 Ай бұрын

Your video is excellent! You saved my marriage...haha. Thank you for your help!

@SOBIsHobbies Ай бұрын

Glad I could help. 😊 Thank you for your feedback! 🙏

@davanhvilayphet9154 4 ай бұрын

You saved my marriage! LOL ! I called the LG support they told me to use the washing machine cleaner 2-3 cycles but it didn’t work, even worse the gunk floating in the washer drum. My husband and I argued about his bad choice on top load washing machine! Thank you extremely helpful video and carefully explained on all the “got ya”

@momojo3459 Жыл бұрын

This is a helpful video and prevented me from damaging the "cap" over the bolt. I have removed both of them and the "hub cap" at the bottom of the tub does not lift out even with a lot of pressure exerted. My washing machine is slightly different than yours (older or newer, I think newer, came with the house) and there seems to be an additional vinyl white threading for the bolt that also holds it in place and needs to be removed. I don't want to pull too hard.

@SOBIsHobbies Жыл бұрын

Thank you for your feedback!

@momojo3459 Жыл бұрын

@@SOBIsHobbies I am looking at it some more and once you have it off the white piece on yours and mine look really similar. I am going to try giving it a hard pull.

@SOBIsHobbies Жыл бұрын

@@momojo3459 keep me posted how it goes for you. Good luck!

@momojo3459 Жыл бұрын

@@SOBIsHobbies I have tried a couple times no success. I have had another attempt it with no luck. We begin to believe you have Popeye arms.

@SOBIsHobbies Жыл бұрын

@@momojo3459 😂 not sure about that. Not to mention I haven’t gone back to gym since pandemic lockdowns. Mainly been doing workouts at home. But anyway, I don’t know why it wouldn’t come off… makes me wonder if ours is a different model than yours.

@Jlb-fz7nl 9 ай бұрын

Thank you for sharing this

@SOBIsHobbies 9 ай бұрын

You’re welcome! Thanks for watching.

@smckinley6373 3 ай бұрын

Nice video. Followed your example and all worked well. However, before I started this process, I ran a tub, clean with baking powder first which seemed to clean out a lot of the gunk. Then I used your tutorial to do the rest. Now the final step is using the tub clean cycle with vinegar.

@SOBIsHobbies 3 ай бұрын

I’m glad my video was helpful. Thank you for your feedback!

@AimGobalWorldBibleSchool Жыл бұрын

Good Job Man!

@SOBIsHobbies Жыл бұрын

Thank you!!

@MetrisGirl Жыл бұрын

Very informative 👌

@SOBIsHobbies Жыл бұрын

Thank you!!

@SOBIsHobbies Жыл бұрын

Thank you!! 🙏

@auntinorm Жыл бұрын

Just purchased an LG that looks like yours. It's model number wt7150. Had I known it was this complicated I never would have purchased it! I'm not tall enough to reach in to do this. About how often does anyone think this thing needs to be cleaned out? Thank you for showing us this important step that was never mentioned in the store.

@SOBIsHobbies Жыл бұрын

I did it for the first time in like almost 5 years. If you maintain it well and do cleaning cycles as the owner’s manual calls for you shouldn’t have to worry about this all that often. These are great washing machines. I think you’ll like yours too. Don’t let this process scare you. If you take care of it well you may not even have to do this for several years to come. Hope this helps! And enjoy your new washing machine!

@angelagregory3897 Жыл бұрын

Maybe helpful tip: I'm about 5'6 and I can just barely reach down there. I used a little step stool (short, one-step folding kind) and that made all the difference! I could bend down inside and get to it without issue.

@zoe-leesweeny8625 Жыл бұрын

Im short and i struggle to get in to the bottom of the machine .. lol.. i had a fuzzy logic for 18 yrs without a glitch. Purchased this one based on my trust of the brand..

@VEGGIEIB 11 ай бұрын

I'm too short to get the clothes on the bottom of the washer drum! I have a pair of tongs!

@VEGGIEIB 11 ай бұрын

@@angelagregory3897Thanks for Sharing!

@harrybrooks9634 Жыл бұрын

THANKS for making the video and sharing how to clean LG washing machine...but...I discovered 2 things: 1) putty knife is easier than a screwdriver to remove the oval plastic center piece; 2) our bolt must have been attached with a HIGH SPEED COMPRESSION-DRIVEN DRILL...I could not get it off and was about to get my wife to try and put her fingers into that small opening on the edge of the tumbler to prevent it from turning while I used an extension on my socket wrench...but she got worried that I would not be able to put it back together and so I quit...not a good day for DIY!

@SOBIsHobbies Жыл бұрын

Thanks for watching! Sorry to hear that it didn’t work out for you in the end. I did notice too that some of these parts are extremely fragile. Most of them are made out of either plastic or thin metal pieces. I had to replace the center cap too because one of the arms broke while I was trying to remove it. Luckily it was not an expensive part. 😊

@adrianamolina9899 6 ай бұрын

I could not get the 10mm screw out at all😭 about to buy a new washer LOL

@cathy1679 11 ай бұрын

Thank you !

@SOBIsHobbies 11 ай бұрын

👍 Thanks for watching!

@janetpeek8538 3 ай бұрын

Thank you soooo much!!!!

@SOBIsHobbies 3 ай бұрын

You’re welcome! ☺️

@MC-ou7fy Жыл бұрын

Thank you for this video. I did everything you said. Cleaned everything out. I did a tub sanitizing cycle. And I’m still getting those little flaky, dirty debris. I am at a loss and so frustrated. Your video was awesome. I did everything you said. Then I ran sanitizing and I’m still getting the little flakes.

@pearlarzabal3473 10 ай бұрын

Thank you for mentioning the brown flakes, I have that problem too😫. No one else seems to mention this issue. Did you figure out how to remove the brown flakes?

@MC-ou7fy 10 ай бұрын

, yes, ultimately I had to remove the entire drum from the machine. And scrub it down outside. I ultimately replaced the agitator piece because there was crud inside of it that could not be cleaned out.

@chlobot56 9 ай бұрын

Was removing the entire drum difficult?@@MC-ou7fy

@onclevov 8 ай бұрын

@@MC-ou7fy How did you remove the entire drum? Older models have a plastic ring on top of the drum that can easily be removed (by pressing on plastic tabs), but this particular model with the "Smart Drum" and "Direct Drive" seems to have screws instead. Would appreciate if you could five some info on how to remove the entire drum. Thanks!

@MC-ou7fy 8 ай бұрын

We took the screws out.

@kimdykes8036 7 ай бұрын

thank you!

@SOBIsHobbies 7 ай бұрын

😊👍

@lloydbatchelor1113 10 ай бұрын

We wanted to thank you very much for the video. Our only question is below in regards to the locrite type?

@SOBIsHobbies 10 ай бұрын

Thank you for yours feedback! I’m not 100% sure in terms of which type of Loctite to use. However, if I were to use a Loctite I would probably go with Loctite 425 to use with plastic since it poses less adhesive strength which is perfect for plastic or rather more delicate materials. Hope this helps.

@eddyqwe1320 7 ай бұрын

I removed the cap by inserting the screwdriver from the side of the openings instead of the top side to avoid breaking the plastic piece. Worked just fine

@ooyginyardel4835 6 ай бұрын

You sir (or ma’am) are correct.

@TripleJBears06 5 ай бұрын

Great video! I was able to remove the cap without breaking it but cannot get the bottom to come off to clean underneath the bottom. Any suggestions? It is not budging. Thank you.,

@markweber5297 Жыл бұрын

My wife wanted to know how much vinegar and baking soda your wife used to clean the tub. Great video. Keep up the good work.

@SOBIsHobbies Жыл бұрын

Thank you for your feedback. My wife uses a half cup of baking soda in first cycle and then followed by a half cup of vinegar in second cycle to clean the tubes and inside of the drum. Hope this helps.

@jodibrewer5005 6 ай бұрын

So the baking soda is used on the wash cycle and vinegar during the rinse? Just trying to understand the steps of when to use each. But doing this without any garments in the wash?

@FreddyImages 8 ай бұрын

Thanks a lot

@SOBIsHobbies 8 ай бұрын

Thanks for watching!

@noahblake8211 Жыл бұрын

I think the reason this "scrud" accumulates is the exit point of the hose is higher than the bottom of the tub... so, trapped water not fully discharged is allowed to sit. My thinking is -you lower that exit point -so it's about the height of the pump -an inch or two above the floor, and then the sitting water will sit in the lowest loop of the hose, like a P-trap. I just cut a bit of the steel body with some tin snips so I could drop the hose down. Also, the design of the agitator is SO stupid -allowing scrud to collect between the stainless top plate and the plastic plate it's pressed to. After carefully bending the circumference of the steel plate away from the plastic, I separated the two -cleaned the plastic part well, and just installed the plastic part by itself without the steel plate. The plastic seems tough enough to endure the abrasion of zippers and rivets, etc. Since the little "hub cap" won't go back on the plastic, I just cut a piece of polycarbonate (plexi-glass) and screwed it onto the plastic with a rubber gasket in between. Just about to run a test wash, but I think these fixes will help eliminate future issues. (still shaking my head at the terrible design.)

@mza186 7 ай бұрын

Is it possible to see a picture of the plexiglass technique you used?

@bsirovatka 4 ай бұрын

Hey Chris. How did you remove the black drive sprocket on the bottom from the drive hub. Many of my bolts fell off after removing the agitator tub.

@Bloodklot 8 ай бұрын

I can not get the bottom panel to come off. After I take off the cap, and undo the bolt with the gasket and washer, the bottom piece does not come off. I tried what another commenter tried and screwed in some screws into the white plastic that has 3 holes. And then lifted with pliers but all I’m doing is lifting the entire barrel. Is there something I’m missing? Or does my model not come off? The barrel looks the same. My model is LG WT7600HWA

@frauna 4 ай бұрын

Thanks!

@SOBIsHobbies 4 ай бұрын

You’re welcome!

@greypalmer7634 Жыл бұрын

No complaints. I love ❤️ when people prevent me from calling 1-800. THANKS

@SOBIsHobbies Жыл бұрын

Thank you for your feedback! Have a happy New Year!

@greypalmer7634 Жыл бұрын

Happy New Year to you too. Is the bolt left or right hand threads. It’s very tight. Thanks

@SOBIsHobbies Жыл бұрын

@@greypalmer7634 Thank you! I had to look at the video myself to remember the thread pattern since I didn’t remember that of the top of my head. 😅 From the looks of it I went counterclockwise to loosen the bolt and clockwise to tighten it. It was a bit tight initially for me too but with little effort I was able to loosen it. Just make sure the socket/wrench is sitting snugly on the top of the bolt before you giving it a go. You want to avoid stripping the bolt edges. Hope this helps.

@greypalmer7634 Жыл бұрын

I got it. Disregard

@camelkelly1-eu4dj Жыл бұрын

THANK YOU

@SOBIsHobbies Жыл бұрын

You’re welcome!!

@frfghtergirl89 5 ай бұрын

Any advice for getting the bolts back into the bottom of the larger piece of the wash drum? The bolts fell down from the large metal piece in the bottom after taking the nuts off

@patriciap6353 5 ай бұрын

Thank you for the detailed info. Excellent tutorial.

@SOBIsHobbies 5 ай бұрын

Thank you for your feedback!

@jhill4874 Жыл бұрын

Thank you

@SOBIsHobbies Жыл бұрын

You’re welcome!

@hesamshaban9737 Жыл бұрын

Hi, Thank you so much for this very helpful video! I followed all your steps. After removing the 10 mm bolt at the center of the panel, but I can’t lift the round panel on bottom of the washer with my hands. Is there any specific tool for this? It seems like the debris under the panel does not allow me to lift it. Thanks for your feedback 🌻

@SOBIsHobbies Жыл бұрын

Thanks for your input. I did not use any specific tool to lift the pulsator panel myself. For me after slightly wiggling it a couple of times it came right off. Maybe yours got stuck…? It’s hard to say without seeing it in person unfortunately, sorry. I would give it a slight pull while wiggling it and see if that would let it come off. But be careful not to pull it too hard or force it too much where you can brake it. Use your best judgment. Don’t hesitate to ask if you have any questions. Good luck!

@KingDavid0606 Жыл бұрын

Use gloves. You need a better grip in the opening. It should pop straight out, but the force you need will cut your hands against the metal in that opening. Funnily enough, when you use the gloves, it'll pop out with less force than you think is needed.

@willyjankins4793 Жыл бұрын

Try Simple Green in conjunction with a stiff nylon brush and/or a green "scotch brite" pad to clean.

@SOBIsHobbies Жыл бұрын

Thanks for the tip. I’ll give it a shot next time. 👍

@willyjankins4793 Жыл бұрын

@@SOBIsHobbies No problem, Brother.

@Friedbread28 5 ай бұрын

Hi, I have a similar washer or maybe the same. Can you show or explain how to get the entire tub out? Replacing the pulsator wash plate did not resolve the brown flake issue for me. I want to get the entire tub out to scrub it.

@rhondaspindley3542 10 күн бұрын

This video was great to explain removing but upon trying to reinstall the hub/plate it keeps coming loose when I run the clean cycle. Does this mean that screw is stripped or am I just not tightening it enough??

@SOBIsHobbies 9 күн бұрын

Based on your description: A. Either the agitator isn’t seated all the way. B. The screw threads might’ve been stripped/damaged. I would try to make sure that everything is properly placed/seated before tightening the screw. Also just for good measures I would apply some thread protector tape on the screw before tightening the hub. Hope this helps.

@themiddleclasseconomist5128 Жыл бұрын

Thanks for the Video. But I think the Prong on the plastic cap was not really broken. You should find one slot on of the plastic cap on the bottom (not the slots on the top) and push a large flat head screw driver in the slot towards the center nut. That prong is meant to give so the cap will come off as you lift. Without that give (flex) of that prong, you might end up breaking one of the prongs.--E

@SOBIsHobbies Жыл бұрын

Thanks for watching! No, actually one of the prongs of the cap in fact was broken. It broke while I was trying to pry it out. Good thing, I was able to order a replacement cap from either Amazon or Walmart (sorry don’t remember exactly from where 😊) and replaced it. The part number for the cap is actually located underneath fyi. Cheers!!

@themiddleclasseconomist5128 Жыл бұрын

@@SOBIsHobbies If you broke it it was because you used one of the Slots on top[ and not the single slot on the side/bottom. . I pushed a flat head screw driver into the single slot on the bottom and pushed the prong towards the center. The other prongs are not made to be flexible..Regardless we both got it done--so thanks--m

@SOBIsHobbies Жыл бұрын

@@themiddleclasseconomist5128 That’s probably what it was in my case. I’ll just be little more careful next time that’s for sure. Once again, thanks for watching! Have a great one!

@paulgugger8987 Жыл бұрын

I would suggest using two screw drivers in two of the holes simultaneously to prevent breakage.

@SOBIsHobbies Жыл бұрын

I will try that next time. Thank you so much for that tip!

@Jose_I Жыл бұрын

What do u do if one of the taps broke?

@SOBIsHobbies Жыл бұрын

@@Jose_I here’s where I ordered ours when I broke the tab when I was trying to remove ours. 😅 amzn.to/3WGzOfD

@Jose_I Жыл бұрын

@@SOBIsHobbies thank you I just broke it 😅 one quick question when installing it back and staring the machine up I here a grinding noise not sure what is? Any idea? I don’t know if it’s because of the broken tab or because of something else

@SOBIsHobbies Жыл бұрын

@@Jose_I I’m not 100% sure what that grinding noise is about but if I were to assume it might coming from the plate itself if it’s not seated properly onto the center rotating pin. If you noticed both the plate itself and the center piece have ridges and grooves. It’s there to keep everything in place nice and tight while washer machine is in use. If I were to speculate it might be coming from there. Otherwise, I’m not sure what maybe causing for that grinding noise. Let us know if you find out what’s the cause. Thanks.