How to remove and install your 2014-2022 Infiniti Q50 Fender

Рет қаралды 16,332

ReveMoto - Pre-Painted Auto Body Parts

Күн бұрын

By pre-painted Q50 fender here: bit.ly/q50Fender
Replacing your 2014-2022 Infiniti has never been easier. We are as detailed as possible so you don't miss anything. Get your car looking new with ReveMoto!
Source: www.revemoto.com
0:00 Start
0:22 Intro
0:43 Headlight removal
2:09 Top fender cover removal
2:42 Taping our edges to prevent scratches/dents
3:18 Fender liner removal
5:06 Rocker panel molding removal
6:24 Fender door bolts
7:16 Lower fender bolts
7:53 Top fender bolts
8:42 Fender accessories replacement
11:59 Fender Install
13:23 Inner fender placement
14:48 Check the gap alignment
17:05 Outro
Tools Needed:
You will need a10mm open wrench and a socket wrench, flat-head screwdriver, and panel clip removers.
Replacing your 2014-2022 Q50 fender panel is not as complicated as it may seem. Removing the headlight is necessary to uncover or get access to other fender bolts. The rest of the fender is a combination of plastic push-pins and moe bolts. Our vehicle's fender liner was petty much destroyed in the accident, so removing it was petty easy. Don't forget to remove the bolts and clips along with the fender liner to the bottom of the bumper. This Q50 sport has rocker panels or side skirts that cover up the lower fender bolts. Carefully pop this molding off with your plastic panel clip remover. The last thing you want to do is scratch the paint on your vehicle. You do not have to remove the top inner fender bolt. You just have to loosen the bolts to remove the fork part of the fender. The rest of the bolts to remove are on the top under the hood.
When you mount the fender, be sure to put the fender behind the bracket on the door. Otherwise, you will not be able to insert the second inner-door bolt. The most important and sometimes unnoticed part of this the alignment of the hood and fender. Do not fully secure the fender until you drop the hood to make sure that the alignment or gap is adequate. Check the opposite side of the hood and door to make sure the spacing is accurate. Once you feel comfortable with the spacing, you can secure the bolts. If the spacing is off, you can adjust the fender by pulling it out and securing the screw.
In this video, we replaced a right passenger side fender. And, both the right and left driver side fenders fits years 2014-2022 Infiniti Q50.
OEM Part Numbers:
F31014GAMA (Left, Driver-Side)
F31004GAMA (Right, Passenger-Side)
Follow Us on:
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
#Infinitiq50 #Q50sport #fenderreplacement #paintedautoparts #revemoto
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 29

@ReveMoto 3 жыл бұрын

Thank you for watching our Q50 fender replacement video. Please let us know if there is something more you want to see for the Q50! Purchase here: bit.ly/q50Fender Source: www.revemoto.com

@diegotophaded9347 Ай бұрын

beautiful work

@ReveMoto Ай бұрын

Glad the video helped out! If you need parts for your car go to www.ReveMoto.com

@adeelsiddiqi6211 4 ай бұрын

Thanks! Saved me a lot of guess work

@ReveMoto 4 ай бұрын

You are very welcome! If you need the fender go to Revemoto.com

@emadayyash9760 2 жыл бұрын

Great job, Thank you

@ReveMoto 2 жыл бұрын

Thanks for watching!

@davepiano3053 2 жыл бұрын

Excellent video!

@ReveMoto 2 жыл бұрын

Thank you! Cheers!

@user-sk8gy6nn6w Ай бұрын

Could you name every part needed to replace the driver side fender

@bdop555 7 ай бұрын

Is the q60 the same way?

@beast11135 9 ай бұрын

Why does your description say up to 2022 but you said up to 2017in the video? Was that an error?

@juanchavez3936 Жыл бұрын

What’s the part called that’s under the passenger headlight? Mines broken and don’t know what that part is called. The black plastic I feel like it supports the headlight don’t know for sure

@ReveMoto Жыл бұрын

Is is the part on 1:57? That is the front fender core support bracket. It's some sort of extension for the fender. You're best bet is to take your broken piece and locate the part # or bring it to a dealership so they can match it. Please follow us, it helps us a ton, take care!

@severinpichon2118 3 жыл бұрын

I'm having trouble removing the driver side fender because the door is jammed .. How should I go about this ? ...I intend to remove and replace the both doors and fender on the driver side

@ReveMoto 3 жыл бұрын

It's hard to say without looking at the vehicle. If the fender is pushed into the door or the door just won't open? Just start by releasing the tension on the front side o the fender. You can usually pull the fender forward a little. Depending how bad it is, you just have to remove the fender. I believe the door hinges are under the fender, so do your best to pull that fender out. There are only bolts near the door. You may have to drill the bolt out form the fender side. The top bolt can be take off by an open wrench if you can get your hand in there. We hope this helps. Good luck & thanks for watching!

@slg4705 2 жыл бұрын

Hello, I have two questions. I have a damaged fender liner on my Q50. If I just want to replace the fender liner, do I have to remove all the parts you removed prior to the fender liner? Also, where can I find replacement bolts/clips for it? It looks like some of mines are missing.

@ReveMoto 2 жыл бұрын

Hello! No, you do not have to remove the fender. Just take a light and find all the clips and screws that hold the fender liner to the bumper, fender and shell of the engine bay. It should be pretty easy to remove the fender liner. We recommend just going to your Infiniti dealership to get any missing clips/bolts. They will give you exactly what you need. If you got an auto parts store, the clips are about the same price but their generic and may not fit. Thanks for watching!

@slg4705 2 жыл бұрын

@@ReveMoto Thank yoh so much!!

@dakernal2011 2 жыл бұрын

Do you have to take the headlight out (I’m doing a G37x)

@ReveMoto 2 жыл бұрын

You probably do not have to. I think we did it so you could see the fender a bit better. There is a bolt underneath the bumper that you have to remove. It was broken on our fender but that is the bolt. Thank you for watching!

@clarencepeter9440 Жыл бұрын

What is the name of the module that is on the right side radiator support next to the horn.

@ReveMoto Жыл бұрын

That is a great question and I do not recall what what that module was for. I tried looking at some diagrams but none that I found had the module listed. You're best bet is to ask an Infiniti parts rep and describe the part and location. Infiniti is pretty unique in having those fender braces. They should pinpoint what it is pretty quick. Good luck!

@neilbhandari2671 Жыл бұрын

did you order the fender pre-painted or paint it yourself?

@ReveMoto Жыл бұрын

Hello Niel! We paint all the parts in-house and ship them to our customers full of warranties. Please visit the link below for the fender and feel free to chat with our staff! bit.ly/q50Fender

@firstlast7584 2 жыл бұрын

How much would a repair like this cost?

@ReveMoto 2 жыл бұрын

It honestly depends on the shops, labor & material cost. An install is normally around $150 + part, paint and labor. So, you're definitely looking at more than $500.