How To Remove Broken Lug Nut From Mercedes | How To Remove Broken Bolt with EZ Out Extractor Tool

Рет қаралды 923,272

8 жыл бұрын

SOLVED - How To Remove Broken Lug Nut From Mercedes | How To Remove Broken Bolt with EZ Out Extractor Tool | Remove Broken Wheel Bolt From a Car
#HarjinderSidhu #BrokenLugNut #SidhuDIY #brokenbolt
🙏 Shop online at Amazon - www.amazon.com/shop/mrsidhu3250
Please note that any Amazon link in my video description is an affiliate link. By clicking on one of these links and making a purchase on Amazon, you are supporting my channel, as I earn a small commission from qualifying purchases. This comes at no additional cost to you and helps me to continue creating more videos. I would greatly appreciate your support in this way! Thank you so much for considering it.🙏
Remove Broken Lug Nut From Rotor | Remove Broken Wheel Nut | Remove Broken Wheel Bolt From Rotor | Snap your Lug Nut due to warped rotors | Broke-off Bolts Techniques
Mercedes 500SL | R129:
Titanium-Coated Drill Bit Set - amzn.to/2uxtknj
Craftsman 29 Pc. Titanium Coated Drill Bit Set - LINK: amzn.to/245m9Lr
Rockwell RK2852K2 Li-ion Brushless Drill/Driver, 20V - LINK: amzn.to/1Vghc20
Damaged Screw Remover and Extractor Set by SKmoon, Easily Remove Stripped or Damaged Screws. Made From H.S.S. 4341#, the Hardness Is 62-63hrc, Set of 4 Stripped Screw Removers - LINK: amzn.to/1XPin9v
Damaged Screw Remover - amzn.to/3cUTFSF
AMPRO T73153 1/8-Inch to 3/4-Inch Screw Extractor Set, 6-Piece - LINK: amzn.to/1qG2TXR
Craftsman 9-66020 Black Oxide Drill Bit Set, 21 Piece - LINK: amzn.to/1VghKVL
Vermont American 12368 9/32-Inch Titanium Drill Bit - LINK: amzn.to/245mrC8
Vermont American 21822 - 5 Piece Spiral Screw Extractor Set No. 1 through No. 5 - LINK: amzn.to/1qG2RPO
(20) Locking Silver Lug Bolts 12x1.5 | 39.9mm Shank Length | for most Mercedes (Includes Socket Key) - LINK: amzn.to/1OK8UJ8
Wagner BD61049 WHEEL BOLT, M12-1.5,VW10 - LINK: amzn.to/1qG3Cs6
Gorilla Automotive 47179N Cone Seat Bolt Locks (12mm x 1.50 Thread Size) - LINK: amzn.to/1sNyMzH
Gorilla Automotive 17100SD-16 Small Diameter Chrome 4 Lug Kit (12mm x 1.50 Thread Size) - Pack Of 16 - LINK: amzn.to/1sNyxVk
Heavy Duty Wheel Chocks - amzn.to/2qpRegc
120Nm torque
Please feel free to share your questions or concerns in the comments below. Hopefully, this information will be helpful to someone. Thank you!
Please like, share, and subscribe to this video!
This video is intended for educational purposes only. Easy Steps assumes no liability for any property damage or injury incurred as a result of the information contained in this video. It's important to note that you use this information at your own risk. Easy Steps recommends practicing safe techniques when working with vehicles, computers, phones, cooking, or any tools shown or implied in this video. Any injury, damage, or loss that may result from improper use of these tools or equipment, or from the information contained in this video, is the sole responsibility of the user and not Easy Steps.
"*Disclaimer: This information is provided solely for educational purposes and represents the opinions of the author."
"**Disclaimer - Background Music "Alan Walker - Fade" (NCS Release)."

Пікірлер: 311

@EasySteps_Sidhu 4 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzfaq.info

@dubaiwatchguide359 3 жыл бұрын

Easy Steps also I have a 2004 g500, is it normal when driving slow speeds on the road to have steering wheel not go back in center, not sure if this is normal. High speeds I can feel it nice and loose but slow speeds the steering is slightly rough and doesn’t return back to center like a normal car

@barlux88 3 жыл бұрын

THANK YOU!!! I have a 2005 ML350 here in Canada, with two broken studs in the front end. Now I know what to do! THANK YOU!!!!!! YOU'RE THE BEST!

@exoduslnx 7 жыл бұрын

"Slowly, slowly..." F IT, FULL POWER

@JonasNicolas 7 жыл бұрын

exoduslnx 😂😂😂😂

@Mrlittlelegz 7 жыл бұрын

exoduslnx 😂

@Chris-yy7qc 7 жыл бұрын

you dont have to rush it..... r rr rrrrr rrrrrrrr RRRRRRRTTRTTRRRRRRRR xD

@AndrewSmith-sy7ws 7 жыл бұрын

exoduslnx 😂😂😂😂😂😂😂

@alexander970211 7 жыл бұрын

the speed of the drillbit isnt the problem the Only thing to be careful of is the feed preassure ☺

@ColinBurnside 7 жыл бұрын

Thank you very much for your advice. I had a complete wheel failure and i used your method to replace 4 broken studs today. I ran through each broken stud with a 3.5 mm pilot hole and then drilled the final hole with a 6 mm drill bit. I used a smaller gauge easy out. I followed the rest of your instructions to the T and completed the job with great success. Thanks also to the AA for an excellent recovery.

@zakkimes8477 3 жыл бұрын

Great video! I just had one break and this video helped me understand how to remove the broken lug. Thanks for such an informative video!!!

@malijehnressalexandriachan6245 5 жыл бұрын

You made it looked so easy!!! Thank you for posting it..I have no idea hows

@JICE-zd7vo 8 жыл бұрын

Thank you Harjinder! That was very helpful!

@josron6088 3 жыл бұрын

Thanks, for putting this up.

@rain-bh9js 7 жыл бұрын

if had that bit for so long and never thought of using it lol, good video

@bobbydaniels4692 6 жыл бұрын

Thanks A LOT!!! Great video!

@MarkJones-gd3nt 7 жыл бұрын

brilliant!!thank you for this video!!!

@colinmanton1488 7 жыл бұрын

Great video, shall be trying this tomorrow (due to broken locking nut key) Thank you

@macconaire7038 7 жыл бұрын

Thanks for sharing man, now i know how to do it myself.

@joser2011a 6 жыл бұрын

Great video , now I know how to do it , thanks a million

@SmokeeWhine 7 жыл бұрын

Thank you so much for sharing your video just saved me money. I surely do appreciate you.

@turbob84 7 жыл бұрын

Great great video. Definitely very helpful

@IMMORTALDIO 7 жыл бұрын

Thanks for that . My job is a little different but the same tool needed . Thanks .

@Dutchman1847 7 жыл бұрын

Good video. Thanks!

@cac7549 8 жыл бұрын

Very nice clear video. Thanks for sharing it with us.

@Bogzanovich 7 жыл бұрын

long live easy steps ! great video !

@ziadfawzi 6 жыл бұрын

Thank you.

@MrMorry123 7 жыл бұрын

nice . well done . simple.

@DLOWBIMMERS 7 жыл бұрын

Ahhhhhhh thanks!!!!

@user-hc4cw1vc3q 6 жыл бұрын

Very good job

@mehranali7139 6 жыл бұрын

Thank you so much Harjinder bhai. You just saved me £60. Top video. 👍🏼👍🏼👍🏼

@museali1432 7 жыл бұрын

thank you so much

@Aramis7 5 жыл бұрын

good vid. thanks

@user-ok4zr2gh1n 7 жыл бұрын

very very good*'عمل جيد *thanks you

@ready_player_one431 6 жыл бұрын

Really nice way

@timothymunday1338 7 жыл бұрын

how satisfying

@TIMcynicalGUINN 6 жыл бұрын

I have a clk 320 and this happens all the time on my passenger rear. Good video

@josipkriznjak7041 7 жыл бұрын

Thank You for dis video

@jcmarth1 7 жыл бұрын

Good video bro you got right to the point

@MrMaher123456 7 жыл бұрын

Easy Steps.

@benjaminsanchez3766 6 жыл бұрын

jcmarth1 Lol

@ronnymartinpelawi3361 6 жыл бұрын

Nice video 🖒

@sandeepsinghsengar9906 7 жыл бұрын

Very informative .trying this tomorrow on my car.one of my car tyre bolt has become round .and the bolt size is same as u have show in video can I use this technique

@777nicro Жыл бұрын

I’ve learned a lot from this. Thanks. What if a lug bolt is not broken off in there but it is stripped inside and the lug bolt won’t stay in place and keeps slipping out?

@MN-sc2uz Жыл бұрын

Then its either retap to larger size or replace the part that lugnuts thread into.

@Afghan-Pride-Till-I-Die 8 жыл бұрын

Hey Buddy your video was "AWESOME!!" Very detailed and I LOVED how you explained the process steps by step!! Great video man and it really helped me out Sir.. Thank you for sharing and posting the video.. Keep Them COMING!!Btw- Nice Mercedes my friend :) Beautiful car...

@Phannomm 2 жыл бұрын

Fantastic!! 🏆

@robmacfarlane5864 8 жыл бұрын

Next time, try using a left-hand drill. You may have to go to an industrial supply catalog to find left-hand drills. When using the left-hand drill, the broken bolt may just unscrew itself by the drilling process.

@cac7549 8 жыл бұрын

Makes sense.

@JackRR15 7 жыл бұрын

The bits I got are like that. One side has the left hand drill bit while the other has the ez out.

@stever5887 5 жыл бұрын

Left-hand drill bits are also available from Amazon; they are made by Irwin and sold in a set. They also come included in some extractor sets. Although LH bits alone can release broken bolts, I wouldn't bet on it happening very often. When trying to remove broken lug nuts like these, it helps to tap the threaded portion smartly with a ball-peen hammer several times and put a few drops of penetrating oil on the threads. When drilling, use a drill bit at least 50% of the diameter of the bolt and to drill down about 1/2" or more before tapping the extractor into the hole. Extractors work on the wedging principle; the deeper in you go, the better it grips. It may also need to use heat to loosen the threaded portion (i.e., the area immediately around the broken bolt, not the bolt itself), should they exhibit "reluctance" when attempting removal. It pays to have a Plan B and even a Plan C when attempting this procedure; they don't always release as easily as these did. Working slowly and carefully, however, will increase your chances of success.

@user-kn2zw1cv4r 7 жыл бұрын

good wark

@bradleyreddy420 11 ай бұрын

You're an angel man ❤ Thank you so much, I've been stuck with this issue for so long 😅 Everyone tells me to drill it out but I never wanted to mess it up so this how-to was exactly what i needed ❤

@EasySteps_Sidhu 11 ай бұрын

You're very welcome! Thanks! glad to help. Thank you so much for the like and thanks for watching.🙏

@musakesedzija7916 6 жыл бұрын

Bravo

@hotakafumio9905 5 жыл бұрын

good job

@jimblane1183 7 жыл бұрын

Highly recommend vice grips for this.

@DamianJansen1980 7 жыл бұрын

Good video. I have to do this on my washing machine...

@orlandosandoval2716 3 жыл бұрын

Thanks man

@markolson7877 7 жыл бұрын

Thank you... More KZfaqr's should take a lesson from your video on ease of watching.

@laurb95 6 жыл бұрын

Good job! :)

@alinmorcov7457 3 жыл бұрын

Thank you

@user-ok4zr2gh1n 7 жыл бұрын

very good

@alpha136 2 жыл бұрын

Love your video...it was as easy and simple to follow as the job was itself.

@EasySteps_Sidhu 2 жыл бұрын

Glad you like them! Glad I could help! please share, thanks.🙏 Thanks for the like and thanks for watching.🙏

@Afghan-Pride-Till-I-Die 8 жыл бұрын

yup :)

@MUHAMMADKHAN-pe7ez Жыл бұрын

this method is known to many people. your way of demonstration is excellent

@EasySteps_Sidhu Жыл бұрын

Great to hear! Thanks for the visit. Glad I could help! please share, thanks.🙏 Thanks for the like and thanks for watching.🙏

@johnnystrang74 2 жыл бұрын

Good video dude, i have same problem with my old car and wasn't sure how to get the broken stud out of the Hub..will give it a go after watching this 👍

@EasySteps_Sidhu 2 жыл бұрын

Glad to help...Please share, thanks.🙏 Thanks for the like and thanks for watching,.🙏

@reginaldigweike4002 3 жыл бұрын

Hi, thanks for the video, you make it look easy but it's not, i have tried different drill bits to make a small hole in the stuck stud before using the drill removal bit, no chance, it wouldn't buldge. What drill bits did you use?

@mightybmw 3 жыл бұрын

Thank you man. Videos get straight to the point 👌🏽

@EasySteps_Sidhu 3 жыл бұрын

Glad to hear that! 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@bucair8753 5 жыл бұрын

The best video of 'em all...

@EasySteps_Sidhu 4 жыл бұрын

Thanks, glad to help. Thank you so much for the like and thanks for watching.

@ibanezgeorge 3 жыл бұрын

Damn... you make it look easy. Luckily I only need to do 1 bolt, not 2 of them.

@stevenalvarado8218 5 ай бұрын

Thanks a mechanic was trying to charge me 1.5k to change all my wheels saved me 1.4K dollars thanks

@barlux88 3 жыл бұрын

LET IT BE KNOWN I followed instructions to a T and it worked perfectly

@hermessalinas6447 6 жыл бұрын

ya ese producto esta en Colombia

@Jademyheart 5 жыл бұрын

Good informative upload buddy, worked like a dream there for you ,well done. 👍👌👍

@Jademyheart 5 жыл бұрын

@@EasySteps_Sidhu Thankyou. Welcome buddy 👌👌👍👍

@sebbounai2328 Жыл бұрын

merci pour la demonstration monsieur bon travail

@EasySteps_Sidhu Жыл бұрын

Glad it helped 🙏 thanks for the visit. Please share, thanks.🙏 Thanks for the like and thanks for watching.🙏

@sanb3586 6 жыл бұрын

Nice video and your narration sounds like Alan walkers song" faded "

@cyenteeszt826 5 жыл бұрын

what Common store can I buy that ez out extractor tool? GREAT VID!!!

@JookerTurk 6 жыл бұрын

En iyi bu adam anlatmış. Yani uygulamış.

@abby-a 8 жыл бұрын

nice car

3 жыл бұрын

Great! Thank you, Gene Simmons.

@EasySteps_Sidhu 3 жыл бұрын

Glad to hear that! You’re welcome 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@rezagrans1296 3 жыл бұрын

I needed help, encouragement on this issue quite urgently at this time- Harinder Sidhu Easy Stepz, u make it eazier with your calm patient great demeanors thanks brother, very good tip starting a recession with a nail before jrilling tooO

@Joseph-eh4rs 3 жыл бұрын

Good job!

@EasySteps_Sidhu 3 жыл бұрын

Thank you! Cheers!

@EndritVj 3 жыл бұрын

Thanks for sharing!

@EasySteps_Sidhu 3 жыл бұрын

Great to hear!👍You are welcome👍, glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzfaq.info

@timothymunday1338 7 жыл бұрын

i have used these extractors on tight bolts sometimes they snap then its a problem but mostly a good quality extractor will work just hit the bolt with a drift hard enough to break any corrosion

@-smp-scientificmethodpersp838 4 жыл бұрын

This is the fastest / easiest / most definite way to get it out of all the other videos I've seen on KZfaq

@EasySteps_Sidhu 4 жыл бұрын

Thanks, glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 4 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzfaq.info

@-smp-scientificmethodpersp838 4 жыл бұрын

@@EasySteps_Sidhu okay, I will check it out. Please check out my channel as well and subscribe

@Toms_Short_Movies 6 жыл бұрын

Same thing happened to me on my old Mercedes-Benz, I tried a smaller extractor and it wouldn't budge. Needed a new hub in the end. Wish I had seen this first.

@Vlad-my8ub 4 жыл бұрын

Thank you very much for the video!

@EasySteps_Sidhu 4 жыл бұрын

Glad it was helpful! You're welcome! 😊👍😊Thanks. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 4 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please like, share and subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzfaq.info

@mario-ck3es 2 жыл бұрын

Thanks dude. 3 broke on my clk 430. Looks easy.

@EasySteps_Sidhu 2 жыл бұрын

You're welcome! So nice of you, Thanks! Glad to help! Thank you so much for the like and thanks for watching.🙏

@EasySteps_Sidhu 2 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@MUHAMMADKHAN-pe7ez 4 ай бұрын

you are super demonstrator!!! sir, will you make a video to take out the broken spark plug please.

@EasySteps_Sidhu 3 ай бұрын

I will try my best to post a video. Thanks for watching.

@brams77 4 жыл бұрын

Great video, I have a broken one on my mercedes clk. Hopefully I will remove it as easily as you 👍

@EasySteps_Sidhu 4 жыл бұрын

Thanks, glad to help. Yes, it will come out easily if you use the right tools. Thank you so much for the like and thanks for watching.

@EasySteps_Sidhu 4 жыл бұрын

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzfaq.info

@acebruh7817 4 жыл бұрын

Did it make clk drive funny

@arinzembadinuju6511 3 жыл бұрын

Thanks alot.

@EasySteps_Sidhu 3 жыл бұрын

Most welcome! thanks for watching.

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@trevorslater2547 Жыл бұрын

Great video my friend 👍

@EasySteps_Sidhu Жыл бұрын

Thanks for the visit and thanks for watching, good luck with your DIY project.🙏 Please share, thanks.🙏

@alexinadon7999 9 ай бұрын

I have this problem and the garage is telling me that I have to change the rod bearing... And now I'm watching this video XD

@EasySteps_Sidhu 8 ай бұрын

Glad to help, thanks for watching.🙏

@stever5887 5 жыл бұрын

You can use a RH drill bit, but you get better results with a LH (left-hand) drill bit. That starts the process in the right direction, rather than jamming the broken lug nut further into the threads. I have an extractor set (#1-#5) that came with left-handed cobalt drill bits, so I already have those on hand. Other KZfaq videos have recommended LH drill bits for this job, as well. In some cases, the LH drill bit will back out a broken bolt, but I don't believe that will happen here; the extractor (easy-out) will then be needed once you've got the hole drilled. I also have a set of square, tapered extractors that are plain (no "swirling" along their length). I think these are better yet, as they have four sharp edges that bite into the lug nut before turning. However, either style should work.

@EasySteps_Sidhu 5 жыл бұрын

Thanks for sharing info. Thanks for the like and thanks for watching.

@EasySteps_Sidhu 5 жыл бұрын

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzfaq.info

@fawad20982 3 жыл бұрын

Thank you so much for the video you made so easy .

@EasySteps_Sidhu 3 жыл бұрын

So glad!You're welcome! 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@andrescott7357 5 жыл бұрын

My nail bent from hammering it in the center of the lug bolt and my Titanium bit broke at the tip. I am going to add some heat first because my lug bolts are of steal or harder metal.

@richroc7 3 жыл бұрын

Very well done however I have a Toyota Sienna & 4 broken lug nuts that don’t screw into threaded holes. Mine are inserted & seated from behind the hub. I tried tapping them out but I didn’t have the right tool, I got a cold chisel today & a small set along with a cobalt drill bit. I’m hoping tomorrow will bring joy 👍🏻

@EasySteps_Sidhu 3 жыл бұрын

So nice of you. You are most welcome. Please share the results, thanks. Glad it helped. Great to hear!👍👍. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@skynet75master 2 жыл бұрын

I had to use cobalt drill bit because the bolt was stainless steel. Other than that, this instruction worked out great for me.

@EasySteps_Sidhu 2 жыл бұрын

Excellent! Glad you liked it!! Thank you so much for the like and thanks for watching.🙏

@harvey92sahota 5 жыл бұрын

Loved the cowboys hat

@monzifitness 2 ай бұрын

WOW that's genius

@EasySteps_Sidhu 2 ай бұрын

Thank you so much for liking my video. I really appreciate it. And thank you for watching.

@vusumuziny 6 жыл бұрын

good tutorial. what precaution should i use for aluminium bodies.

@vusumuziny 6 жыл бұрын

Easy Steps thanks alot..

@rayoh2011 3 жыл бұрын

good job! thanks.

@EasySteps_Sidhu 3 жыл бұрын

Great to hear!👍You are welcome👍, glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 3 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzfaq.info

@rayoh2011 3 жыл бұрын

@@EasySteps_Sidhu 👍

@UK-mu1wn 2 жыл бұрын

nice video.. Hi from India

@EasySteps_Sidhu 2 жыл бұрын

Hello 👋 Glad you liked it! 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌

@EasySteps_Sidhu 2 жыл бұрын

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzfaq.info

@user-hc4cw1vc3q 6 жыл бұрын

عمل جيد جدا

@user-hc4cw1vc3q 6 жыл бұрын

Well come

@mikestevenson1908 5 жыл бұрын

Is your drill bit titanium coated or completely titanium?

@boysofnlp8285 7 жыл бұрын

Good job but the wrench position is bad it can be slip ...

@Mukeshmiktecrep 8 жыл бұрын

You broke two Bolts.......... Man how much torque you were using!

@MProper 6 жыл бұрын

THE NEW BOLTS HAVE A TOTALLY DIFFERENT CONE! On the old one it's a rounded cone, and of course the cone in your rims is rounded. The straight cone comes with the new bolts doesn't fit in your Mercedes rims!

@fayssalfayssal2156 6 жыл бұрын

good

@fayssalfayssal2156 6 жыл бұрын

thank you to teach me how to extract a bolt messed up is my worst nightmare and Jere well your mercedece me throw a renault Safrane 2.5i and jais roncotrer this Jon probably con jaiter doing my distribution

@soldier99009 4 ай бұрын

Question 2004 navigator. When I’m driving and I press the gas pedal, it just accelerates doesn’t move until I press ot for longer?

@bankulin8641 6 жыл бұрын

Removing brake disc would help. A lot.

@bankulin8641 6 жыл бұрын

Your welcome. :-)

@FalcoF8l123 6 жыл бұрын

User the drill at left sens

@catwilds1 7 жыл бұрын

con la broca izquierda se biene solo el torrnillo

@harrisfamily402 3 жыл бұрын

You appear to be replacing the OEM semi-circular profile wheel bolts with taper profile wheel bolts ? This is dangerous, as the taper profile will damage the alloy wheel, and WILL NOT seat correctly - all of the load will be bearing on the small area where the taper meets the bottom of the cup.