How To Remove Gauge Panel 67-72 Chevy / GMC Truck

Рет қаралды 22,270

Күн бұрын

In today's video, I will show you how to remove and install the gauge panel in a 67-72 Chevy or GMC truck. These gauge panels or instrument clusters should be universal on the trucks, Suburban's, K5 Blazer's and Jimmy's. Make sure you watch the entire video that way you don't accidently damage anything trying to remove it. These clusters are going for upward of $500 these days!
#ItsTheChad #chevytrucks #C10TruckNerd
67-72 Factory Assembly Manual - amzn.to/3nKvLih
How to Restore your Chevy Truck - amzn.to/3nKOdHI
Dakota Digital Cluster - amzn.to/3yMebiG
Dakota Digital Gauges w Tach - amzn.to/3uTpd4k
Dakota Digital White Cluster - amzn.to/3AXseVp
8 Pin Headlight Switch - amzn.to/3tg96gv
7 Pin Headlight Switch - amzn.to/3tbKOEt
Wiper Video - • 67-72 Chevy C10 / GMC ...
Wiper Motor Video - • 1967-1972 Chevy / GMC ...
Rally Wheel Video - • Rally Wheels for Truck...
Rally Wheel Restoration- • Cheap Rally Wheel Rest...
10 Tips to Keep Your Trailer From Being Stolen - • 10 Tips to Prevent You...
To Follow and See What I'm Up To:
/ itsthechad71
Check out all my 67-72 videos here:
• 1967-72 C10 Trucks
Keyword research tool for KZfaq (TubeBuddy) - www.tubebuddy.com/ItsTheChad
//My Gear Used:
My Camera -amzn.to/3FMHcML
GoPro - amzn.to/39EJmDF
My Tripod - amzn.to/3gLfeKO
My Microphone - amzn.to/485QAtY
My Lighting - amzn.to/34Y4aDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting ItsTheChad!

Пікірлер: 78

@dumpsterpossum 2 ай бұрын

I just got a 70 gmc and this is exactly the type of videos I need to do some repairs without cursing for 4 hours. Thank you

@C10TruckNerd 2 ай бұрын

I appreciate the support! I'll keep them coming!

@BayCreeper1 25 күн бұрын

Got a 72 from my dad...thank you for these videos.

@C10TruckNerd 24 күн бұрын

Absolutely! I love seeing trucks stay in the family!

@longrodlseries 2 ай бұрын

Helpful video. The info about the button to let the light switch rod loose was the helper for me. Wasn't able to get loose the oil pressure line but was able to get enough room to remove the bulb sockets to adjust the contacts and lights are working again.

@C10TruckNerd 2 ай бұрын

Good deal! All the little tips and tricks make things go so much smoother. Thanks for watching!

@charlesmedrano3825 Ай бұрын

Thank you for great accurate content. I'm just starting to restore a 72 a/c cab C10 and before starting decided to see if anything had been posted that would help me along the way and I found your videos first. So grateful for the time you took to show and explain these processes.

@C10TruckNerd Ай бұрын

I appreciate the support! I wanted to spread what has worked for me in the past to save others time and money! Especially from buying the wrong parts.

@jasoncolwell7293 14 күн бұрын

mines a 67 c10 and the choke knob does not screw off and theres no set-screw

@rooky55 6 ай бұрын

My 72 Cheyenne dash was so easy to do compared to my 65 Corvette that did not have the PC on the dash and had so many connections and condensers that hat had to be grounded if you had a radio option.

@C10TruckNerd 6 ай бұрын

Sometimes I think the C10 dashes are tight, but nothing compared to a Vet! I’ll stick to my trucks!

@brlwa6354 6 ай бұрын

Hey thank you for sharing all the information with us. I've had this cluster out before years ago so I thought it would be a breeze...wrong, I must have read a manual. Oh, so there's a button you push to remove the light switch knob...😒 Anyway I'm subscribed and thanks again.

@C10TruckNerd 6 ай бұрын

I appreciate the support! I’m always glad to help the next guy out. I know a bunch of knobs and switches have been broken over the years. Even a couple by me! Thanks for watching!

@patricksmith9339 Жыл бұрын

Thanks Chad. Just brushing up my 67-72 knowledge as it has been a few decades since I had a dash of a C10 apart. ! ! I got the nephews hooked on these trucks and now they help me. Life is good ! !

@C10TruckNerd Жыл бұрын

That’s awesome! Love seeing the next generation staying interested in the old trucks. Enjoy your time with them!

@RichLeespage Жыл бұрын

My brother and I picked up a 1968 c20 Panel Truck for $800 bucks, 307 not froze up, back back tires ok

@C10TruckNerd Жыл бұрын

Great score! 68s are awesome!

@joaquinsablan5406 8 ай бұрын

Thanks Chad, I want to rebuild my complete front suspension do you have a video , for my 1971 GMC 1/2 ton truck .

@C10TruckNerd 8 ай бұрын

Thanks for the support! I don’t have a video out yet for that. I need to make one, because I’ve got to get mine rebuilt on the 71 too. Got all the parts, just not the time yet.

@chadsandefer5666 10 ай бұрын

Hey Chad my name is Chad lol I got a 68 bad ass clean Cali truck sorry for that lol my 68 wiper is on the left just like u said there is a hole on right for wiper and there is a gm emblem that's bolted from the back with a 5/8 nut . That's 1 more thingy 😮 love the videos brotha 👌

@C10TruckNerd 7 ай бұрын

I appreciate the support! I haven’t had one of those delete plates on any yet. That could have been covering the fast idle hole or choke.

@douglasfick 4 ай бұрын

Chad, I have no power at my heater fan switch, heater fan quit working, took motor out, bench test ok, took fan switch out looked ok, took reostat out it looked ok, found wire that goes to switch over somewhere across dash it has no power. can i take a wire from another power source and feed to this line. the heater was working fine till one cold morning it was working and just quit

@C10TruckNerd 4 ай бұрын

Sorry for the delay! I’ve robbed power several times, as long as it’s switched and fused. I just don’t rob anything from the ignition.

@jimturner8545 Ай бұрын

Like all your videos.. have a 1972 GMC C2500 pickup that I'm giving some TLC. Noticed you have a newer bench seat in one of your videos. I need to replace/update mine. Any videos for that task?

@C10TruckNerd 24 күн бұрын

Awesome! You can’t go wrong with a 72! I haven’t made one yet on recovering a seat, but have it on the list for my 71 GMC.

@SteezeCartel 2 жыл бұрын

Thanks for the vid. My temperature gauge hasn't worked on my Suburban since I bought it. This video is full of great tips ! I will watch more of your vids on 67-72 chevy trucks. Subscribed.

@C10TruckNerd 2 жыл бұрын

Thank you! I hope these videos can help others save some time and headaches down the road. Thanks for reaching out and for watching!!

@Challenged1 2 жыл бұрын

Very comprehensive video. Thanks for making it!!!

@C10TruckNerd 2 жыл бұрын

Thanks Garrett! I like your big words!

@capefearcruisers1278 7 ай бұрын

Thanks, Chad. Just getting ready to replace the instrument cluster in my 72 C10 and your video was spot on. I noticed a gas door on the side of the cargo box in one segment of the video. Been wanting to move my gas tank from inside the cab to somewhere under the cargo box, but prefer not to use the kits that will place it in the back in place of the spare tire holder. Are you aware of a kit for saddle tanks on the C10?

@C10TruckNerd 7 ай бұрын

I appreciate it! I don’t know if any companies are making aftermarket saddle tanks for these anymore. You might be able to track down a set or even one from an old custom camper or one added on. If you watch the episode of “demo day” with my green GMC, I remove a set. I hope that made sense!

@raymondmenendez6499 8 ай бұрын

Hello! I have a 1970 C10 and I want to replace my cluster plus add a 5,000k tach. But I was told that I can't add a tach because I have an HEI distributor. Why can't I add a tach?

@C10TruckNerd 8 ай бұрын

Some companies will warranty or guarantee their repop tach and others won’t. I’ve heard of several going up in smoke and others have been ok. Several have mentioned using a tach filter. I’m not sure where you pick one of them up at. I have always used an aftermarket tach on the column or in the tach slot in the cluster.

@raymondmenendez6499 8 ай бұрын

@@C10TruckNerd thanks. That's one heck of a " shed " you have there 🤭

@fjb9234 2 жыл бұрын

Just in time Chad! Replacing my bezel this weekend.

@C10TruckNerd 2 жыл бұрын

Outstanding! Good luck!

@intotheaether9022 Жыл бұрын

Great video man, I was stuck on how to get that headlight switch rod out. Thanks.

@C10TruckNerd Жыл бұрын

Absolutely! Glad it could help!

@wellsway1 6 ай бұрын

Very informative, I like how you take your time and share your knowledge with new C 10 owners, I’d love to see a tack added to the Center of the cluster and what’s involved to do that

@C10TruckNerd 6 ай бұрын

I appreciate the support! I can make that video one day if I can find one cheap enough. I usually put in an external tach. Seem more reliable, but don’t look as good.

@darrelfuhrman8217 Жыл бұрын

On removing the cluster, you forgot the 2 screws with the #3 Phillips heads that holds the closure strip under the steering column. Actually it was excellent! I am driving a 69 C10 daily to work. I am the second owner. It just turned over to 311,000 miles today coming home from the farm. Hello from north east Montana. 10 miles from the Canadian border.

@C10TruckNerd Жыл бұрын

Dang it Darrel! I totally missed it. It wasn’t on that 69 and didn’t remember to put one back on for the vid. 311,000. That’s awesome! I love hearing the history that comes with these old trucks! Stay warm up there and thanks for watching!!

@juansarabia7530 Жыл бұрын

Third owner here (my dad gave it to me) - 450,000+ miles

@intotheaether9022 Жыл бұрын

So, I'm breaking back into my dash because I'm having to redo a bunch of the wiring harness stuff and that fiber optic line that illuminates the gearshift, frayed on me. Is that something that is necessary? If I don't care about it being lit up, can I just cut it off the back and put the light bulb back in and it would still work or because it is fiber optic, is it not carrying any actual current and I could just tape it up and put it back?

@C10TruckNerd Жыл бұрын

Yep! Just a bonus light but not necessary.

@intotheaether9022 Жыл бұрын

@@C10TruckNerd that's what I was thinking, thanks bro!

@dawnchike7716 Жыл бұрын

ty, Excellent tutorial

@C10TruckNerd Жыл бұрын

I appreciate it!

@perrymccormick7028 10 ай бұрын

Thanks, Chad. I'm taking apart a rusty '67 farm truck. This is my first one and it's a retirement project. I'll keep watchng for hints down the road.

@C10TruckNerd 10 ай бұрын

You bet! You can’t go wrong with a 67! My year specific video should help you on on 67s. Thanks for watching!

@douglasfick 4 ай бұрын

what size bulb to use in the fiber optic socket, mine is real dim

@C10TruckNerd 4 ай бұрын

I use 194s in everything. They also used 1895s in oil pressure and so forth. Here is a link. www.67-72chevytrucks.com/vboard/showthread.php?p=8698597

@Robert-lo6uf Жыл бұрын

Awesome video. Thanks for making it💪

@C10TruckNerd Жыл бұрын

I appreciate it! I'm glad it could help. Thanks for watching!

@ratrivervintage6306 Жыл бұрын

Thank you for these informative videos! The absolute only thing that works in my 67 C60 is the oil psi. No lights, wipers, other gages etc. Looks like this is an easy way to get to the wiper motor perhaps. I'll have to re watch that video. Thanks Chad

@C10TruckNerd Жыл бұрын

You bet! This would be the route I would take for the wiper motor as well. Saves you some bloody knuckles. I wonder if the printed circuit board has damage somewhere on the back of the cluster if that much stuff isn’t working.

@ratrivervintage6306 Жыл бұрын

@@C10TruckNerd yes, I saw they sell new circuit boards on ebay for this, any experience with these? I have a water leak in the rain gutter down through the windshield and drips out underneath, I imagine this may have created a problem. Is the wiper motor separate from the circuit board? I haven't poked around yet, the weather is not favorable up here right now.😊

@C10TruckNerd Жыл бұрын

@@ratrivervintage6306 I haven't tried a knock off circuit board yet. I usually buy from LMC or Classic parts since they are the closest to me. The wiper motor is independent of the board. The switch is usually the failure point if the wipers don't work. The motors are pretty tough. 67 has a year specific wiper switch. Those drip edges commonly leak when the old seam sealer fails. The interior roof line of my GMC has rusted through due to this.

@ratrivervintage6306 Жыл бұрын

@@C10TruckNerd thank you for all the helpful information! I appreciate it, and all your videos as well!

@rosschapin5577 11 ай бұрын

Chad, thank you for your guidance.... I am now going to geterdone . ..

@C10TruckNerd 11 ай бұрын

You bet! Glad it could help!

@nathansauter5683 Жыл бұрын

Nice video

@C10TruckNerd Жыл бұрын

I appreciate it! Thanks for watching!

@jimmysapien9961 Жыл бұрын

Thanks Been there Done That 🙃

@C10TruckNerd Жыл бұрын

Probably more than once!

@jameswilkins288 2 жыл бұрын

Chad have any idea on how to remove hazard button on the steering column

@C10TruckNerd 2 жыл бұрын

If it’s the original red style, you have to pull the wheel and replace the turn signal switch. I don’t believe anyone just makes a red replacement knob.

@briizcustoms9543 Жыл бұрын

I’ve got a 1976 Chevy Itasca RV on a Chevy p20 chasis. After I got a new alternator put it my gages spin crazily, they ALL spin besides the battery gage one I’ve noticed. I’ve gotten it looked at by 2 mechanics and the wiring is fine according to them, they say it’s the cluster panel itself but I struggle to understand that as they were working perfectly fine before the new alternator. Also there’s a green wire, it was connected to something then I discovered it burned off at the end. At this point I’m wanting to just figure out what’s wrong myself, any advice at all?

@C10TruckNerd Жыл бұрын

Sorry for the delay! Maybe disconnect the plug or power wire from the alternator and see if it stops. Maybe the voltage regulator is bad or the new alternator has a built in regulator on top of the one under the hood.

@jamesritter Жыл бұрын

Great video. Are you going to the C10 finals this year?

@C10TruckNerd Жыл бұрын

Thank you! I doubt I will make many events other than local stuff unless fuel keep coming down.

@juansarabia7530 Жыл бұрын

Be uber careful with oil pressure tubing. BE WARY of cross threading ther tubing

@C10TruckNerd Жыл бұрын

That’s a great tip!

@rogerstern2542 Жыл бұрын

Chad well i got all of mine all rounded up (4 67s 1 68 0 69 2 70s 3 71 3 70s 2 72s.) I I have 71 long horn frame if you know of anyone who wants it. I really would like a full house so im hunting a 69.

@rogerstern2542 Жыл бұрын

3 70s not 2 . Still looking for a decent short box or step side for my 67

@C10TruckNerd Жыл бұрын

You have a bigger collection than me! Lol

@C10TruckNerd Жыл бұрын

What part of the US are you?

@rogerstern2542 Жыл бұрын

Montana