1967-1972 Chevy / GMC Trucks - Kick Panel Vents

Рет қаралды 29,824

2 жыл бұрын

In today’s video, we will be discussing the kick panel vents that came in the 1967-1972 Chevy and GMC trucks. I will show you how they work and their differences. I will also show you how to remove, install and what type of maintenance you should be preforming on them.
Make sure to check out my other 1967-1972 truck videos!
#ItsTheChad #kickpanelvent #chevytrucks
Cowl Vent Trash Guard's can be bought at LMC truck or Classic Parts of America.
www.lmctruck.com/1967-72-chev...
www.classicparts.com/1967-72-...
Kick Panel Vents
www.lmctruck.com/1967-72-chev...
www.classicparts.com/searchpr...
67-72 Factory Assembly Manual - amzn.to/3nKvLih
How to Restore your Chevy Truck - amzn.to/3nKOdHI
To Follow and See What I'm Up To:
/ itsthechad71
/ itsthechad71
Check out all my 67-72 videos here:
• 1967-72 C10 Trucks
Keyword research tool for KZfaq (TubeBuddy) - www.tubebuddy.com/ItsTheChad
//My Gear Used:
My Camera -amzn.to/3FMHcML
GoPro - amzn.to/39EJmDF
My Tripod - amzn.to/3gLfeKO
My Microphone - amzn.to/485QAtY
My Lighting - amzn.to/34Y4aDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting ItsTheChad!

Пікірлер: 70

@nicholasortega7903 6 ай бұрын

Thanks for the videos, Chad. They’ve come in handy on my 68. I appreciate you doing this…

@C10TruckNerd 6 ай бұрын

Absolutely! I always enjoy helping the next guy. Thanks for watching!

@jodydewey3516 2 жыл бұрын

I made my vent box outer panel removable so I could clean it and recoat it. I also coated the entire vent area with bedliner and made a large 1.5 inch drain with a hose so water and dirt can drain out past the fender

@C10TruckNerd 2 жыл бұрын

What a great idea! I’m sure that helps the fenders from rusting so fast as well. How do you attach them back on?

@jodydewey3516 2 жыл бұрын

@@C10TruckNerd rivnuts. I rtvd behind the joint so it wouldn't leak

@C10TruckNerd 2 жыл бұрын

Good deal. Thanks for letting us know!

@MAYCOCustomRestorations 2 жыл бұрын

Do you have pictures of that on the forum or online somewhere we can see?

@jimmysapien9961 Жыл бұрын

That’s A Great Idea 👍🏻

@billycrowell9747 Жыл бұрын

I'm about to get a 67 with small back window. I had this same truck 30 years ago and I didn't know about these vents . I know now thanks to you, awesome video thanks for sharing it does help.

@C10TruckNerd Жыл бұрын

I appreciate it! You can't go wrong with a 67! Enjoy it and thanks for watching!

@captainpiett3521 Жыл бұрын

My pops left me his 71 when he passed 10 years ago. And I'll be dipped I'm still learning new stuff on these old trucks ! I watched the video then had to go see like huh how have I never seen these 🤣. I was able to clean what junk and gotten inside with your tips. Much appreciated!

@C10TruckNerd Жыл бұрын

I think it’s great he left the truck to you. It’s the memories and stories that come with these trucks that I appreciate. Plus 71 is my favorite year! I I enjoy helping the next guy out by saving them some time and headaches from what I have learned. Hopefully cleaning the kick panels out will keep them from rising so fast. I appreciate you sharing and for watching. Enjoy that 71!

@LLopez-ms6nl Жыл бұрын

While you have that off, here's a tip for when you want to put your fender badges on without having to remove your fender. After I got my 67 back from paint, I took a small drill bit and put pilot holes into that air pocket thru the existing badge holes in the fender. From the inside, I used a bit big enough to put a 3/8, 5/16? socket thru. Put my badges on, then used those plastic hole plugs from O'Reilly's with RTV to prevent rusting.

@C10TruckNerd Жыл бұрын

That’s a great idea! I love the outside of the box thinking! Thanks for sharing and for watching!

@Raven-rl7gj 2 жыл бұрын

Well done video. I enjoyed watching it.

@C10TruckNerd 2 жыл бұрын

Thank you! I hope it helped!

@tedfresch6364 Жыл бұрын

This was a big help - thank you

@C10TruckNerd Жыл бұрын

Absolutely! Thanks for watching!

@kentfellers Жыл бұрын

Every time I'd get out of my 68 my shirt would be covered in debris. Vacuum hose alone never got the job done. Now I know how to fix that. Thanks.

@C10TruckNerd Жыл бұрын

You bet Kent! Thanks for watching!

@Stotz360 Жыл бұрын

Awesome video thanks for the tip.

@C10TruckNerd Жыл бұрын

You bet! Always glad to help the next guy. Thank you for watching!

@Bob_Suruncle 10 ай бұрын

Good info for me. Thanks!

@C10TruckNerd 10 ай бұрын

You bet. Glad it could help! Thanks for watching!

@timwilhelmson8707 2 жыл бұрын

LOVE THE TIPS GIVE ME ALL YOU GOT THANKS.

@C10TruckNerd 2 жыл бұрын

Thanks Tim! Will do.

@20alphabet 2 жыл бұрын

Thanks Chad !

@C10TruckNerd 2 жыл бұрын

You bet! Thanks for watching!

@henrent 2 жыл бұрын

I had no idea about these vents even though I had one of these trucks before.

@C10TruckNerd 2 жыл бұрын

That’s not uncommon. Many never use them anyways.

@hmmm.7778 2 жыл бұрын

Man! Sure glad I found your video. So far the only one that goes into detail about this situation. Thank you! I'm also interested in the windshield wiper juice and hose assembly. By the way... any have a chrome windshield wiper arm for sale? 1969 C-10 Suburban (Passenger Side). Thanks again y'all!

@C10TruckNerd 2 жыл бұрын

Awesome! Glad to help. I will get the wiper idea on the list. I don’t have any original wiper arm stuff right now. Sorry. Thanks for reaching out and for watching!

@jimmysapien9961 Жыл бұрын

I agree

@jimmysapien9961 Жыл бұрын

@@C10TruckNerd LMC AND BROTHERS Sells them 👍🏻

@iantanner8807 7 ай бұрын

Ooh and thanks for. The excellent video

@C10TruckNerd 7 ай бұрын

I appreciate it!

@ryanfox7529 7 ай бұрын

Im going to weld my vents up and open the bottom os the outer panels get a vintage air setup. Then no more problems!

@C10TruckNerd 7 ай бұрын

Sounds like a good idea to me!

@joselouru Ай бұрын

Done all this plus at brothers they sale a cowl screen to prevent from future reoccurrence of debris

@C10TruckNerd 23 күн бұрын

Excellent move! Prevent it before it becomes a problem!

@darrelfuhrman8217 Жыл бұрын

An old GMC mechanic told me that 67, 68 vents are larger than 69 to 72 vents. About 1/8” taller and 1/8” wider. I think that he is correct, because I tried putting 70 vents in to our 68. The 70 vents did not cover as much area as the 68 vents. Hello from north east Montana. 10 miles from the Canadian border.

@C10TruckNerd Жыл бұрын

Well good to hear from some friends from the north! I hadn’t heard any vent differences, but nothing would surprise me with these trucks. I know the replacements are sold as 67-72. I have some 69 and 71 vents I can try in our 68 GMC. I appreciate you reaching out and for watching!

@dtread9543 Жыл бұрын

One of the problems with this cab and wind noise is that there aren't vents to let the air OUT of the cab. This over pressurizes the cab and forces air to leak out through the door seals and wing windows giving you all that leaky wind noise as speed increases. The later trucks came with a small vent on the driver's side door jam, but this is still not enough to properly vent the cab at road speed.

@C10TruckNerd Жыл бұрын

Good to know! I knew GM started installing jamb vents in 1971 on these trucks. I wondered why. Thanks for the info!

@jimmysapien9961 Жыл бұрын

I just Crack tha Window- and if your Worried about Water then Just Install the Metal Window Door shade.

@christinewoodruff255 Жыл бұрын

I have a 56 and 65, wonder if they have same type 🤔 of problem, excellent video by the way.

@C10TruckNerd Жыл бұрын

Thank you! I hope they don’t hold trash like these. Thank you for watching and enjoy those trucks!!

@dmack8634 9 ай бұрын

Great information , Thank you !! You mentioned the actuators in this video. My 72 has 3 vacuum lines coming off of the a/c/ heater control unit and I'm trying to find a diagram or video that talks about how these actuator vacuum lines all connect. can you help?? I can only find a diagram for a '71 that only has 2. Thanks in advance .

@C10TruckNerd 9 ай бұрын

You bet! It looks like a 72 thing. Give this a read. I think it will help. 67-72chevytrucks.com/vboard/showthread.php?t=518197

@8luggarage 9 ай бұрын

Is there any tricks to getting a good rust encapsulater in these air buckets? I thought of spraying fluid film in there with a 360 degree wand.

@C10TruckNerd 8 ай бұрын

Those wands that come with the rust encapsulator by Eastwood works well. Pulling the visors and rear view mirror off to get the roof line works great.

@Stevechevy-dg5eo 8 ай бұрын

Thanks my 72 C20 seems to leak from above the kick pan vent on both sides?

@C10TruckNerd 8 ай бұрын

You might pull the glove box liner and see if you got some sneaky rust up there. The seal around the antenna line might be rotten allowing water in as well.

@jamesritter Жыл бұрын

Hey Chad does the cowl mesh cover you mentioned get clogged up with debris? I know with gutters on a house I have an easier time cleaning the gutter out versus cleaning off gutter guards. Also, are you going to the c10 show July 16th in Independence? I entered my 71 K10. I'm going to see if I can win a trophy for truck that needs the most work! ;)

@C10TruckNerd Жыл бұрын

Awesome James! Can’t win if you don’t try! The screens can get clogged. I had an elm that I used to park under and the little seeds would land on top of it but didn’t get inside. I was able to wash them off and down the fenders. Pine needles and small stuff could still get through if they land vertical.

@Bewaretheides 2 жыл бұрын

Windshield washer pump and hose video please!!!!!! Or how to make sure the garage cluster works correctly. My temp and brake light in my gas gauge don’t light up

@C10TruckNerd 2 жыл бұрын

Awesome! I will get them on the list.

@Bewaretheides 2 жыл бұрын

@@C10TruckNerd Thank you. Love the videos !

@C10TruckNerd 2 жыл бұрын

Thank you!

@iantanner8807 7 ай бұрын

What colour is that cab?

@C10TruckNerd 7 ай бұрын

It’s GM light green code 503.

@tomk821 Жыл бұрын

Great video but didn't show how to clean out air condition right side vent. Door is under tension.

@C10TruckNerd Жыл бұрын

Sorry for the slow reply Tom. Your comment went to review and I didn’t see it until now. You can loosen the actuator or give the flap a manual turn and depress the spring loaded rod.