How to remove Paint Scuffs on your Car !! Diy

Рет қаралды 3,285,525

6 жыл бұрын

Full video on how to remove car scuffs and deep scratchs on your car! This is easy and cheap Repair you can do it at home yourself!! Help or advice here : / mad4motors
2019 Bumper Repair video: • How to Repair Damage o...
Products used:
Clearcoat aerosol- amzn.to/2ANeEUJ
Silver wheel aerosol- amzn.to/2Dauv0V
Primer Aersosol- amzn.to/2DctNR7
Sandpaper assortment- amzn.to/2RSrcUg
Masking Tape- amzn.to/2RLsZuy
Tack cloth- amzn.to/2RK60jv
Body Filler Bondo amzn.to/2Mai48q
My Camera and gear
Canon Eos Camera -amzn.to/315aKSE
Sturdy Tripod -amzn.to/2Wm4erX
50mm Stm Lens -amzn.to/2HUCgut
Timelapse iphone 8 -amzn.to/2WPEvrn
Phone Tripod -amzn.to/3183gxW
Camera Bag -amzn.to/2JTPh9V
FB- / mad4motors
Instagram: Mad4motors
Disclaimer:
Due to factors beyond the control of Mad4Motors, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Mad4Motors assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Mad4Motors, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Mad4Motors.

Пікірлер: 513

@Mad4Motors_ 6 жыл бұрын

New video on" how to paint the hood on your car". Take a look!! kzfaq.info/get/bejne/ldWndMVy3J2qg3k.html

@selvarajb8896 5 жыл бұрын

Selvarajb82@gmail.com

@jesusmelchor7681 3 жыл бұрын

If i don't have that 2 k clear coat what other clear coat could I use

@natashaprame9226 Жыл бұрын

Thanks so much for this tutorial! I repaired huge deep scratches on my car (took me maybe 10 hours all up across 2 days). I'm a car noob but following this video helped me get perfect results! I really appreciate the simplicity of this video and the fact that I saved around $1000 by doing this myself. Something I didn't expect however was the mismatch of my car gloss with the acrylic lacquer so I had to buff out the repaired area afterwards.

@ColinPrince 5 жыл бұрын

I enjoyed the video you made repairing the Audi, but this video made me believe that even I could do it. My biggest mistake in the past was not taking enough time ( impatience) and applying the paint too thickly, both of which I now recognise as my main mistakes. Thanks so much. Colin.

@shiewaanwyeth5922 3 жыл бұрын

Hi. What I like about you my sir. You don't leave any small detail out. Like most of the other guys. I'm definitely a big fan of yours. Thanks again my sir.

@paulhunter123 2 жыл бұрын

yes theres a hard paint line where the paint was applied right up to the taped off area. This could have been avoided by not taping the masking paper tight down to the bumper but placed over it instead and secured. However with a fine wet and dry paper it could be feathered in and buffed up. which i later read is what the guy did and got a seamless transition. Good repair.

@Tim252525252 6 жыл бұрын

good tip: in stead of using tape on the left on the bumper what will leave a line you want to use a A4 paper and fold it in half so you have the round side of the paper facing the part you want to paint. in that way you wont have a line but you have a smooth trasition.

@Mad4Motors_ 6 жыл бұрын

Hi thanks the transition was invisible after I flatted and buffed it next day thanks

@Naughty_Squad 6 жыл бұрын

Hi was looking at CrisFix smart asz

@amosburke511 6 жыл бұрын

What do you mean by "flatted"?

@CharcoalChaos 5 жыл бұрын

Tim ...a better tip: the bumpers tiny, paint the whole darned panel, simples, no transition!!

@redsuru2217 5 жыл бұрын

Ye that’s true I work for a company which dose all this stuff mobile

@Johnboyjws 5 жыл бұрын

Great video I feel confident enough after watching this to tackle my Jaguar XF front bumper thank you

@jerrymatthew4394 6 жыл бұрын

Well done, I already get my bumper repaint and it cost me $ 500. You probably spend less then $ 50 and the result look not bad at all.

@gwhiz6958 4 жыл бұрын

Thanks! As a first-timer this helped me out a ton.

@trevorbaker1537 2 жыл бұрын

Nice clear no-nonsence video. I will definately be following this advice to repair a deep scratch on our Honda. Great looking job too so I will be chuffed if my repair looks that good.

@UKtilly 5 жыл бұрын

This time we will be expanding our spray area to cover the whole car.

@pandascribbles7211 5 жыл бұрын

Til williams 😂😂😂😂😂

@PFab 3 жыл бұрын

You might as well start painting the house after.

@RobWhittlestone 6 жыл бұрын

Good job, good video! Thanks for the insights! All the best, Rob

@TheMrmmkkpro 4 жыл бұрын

That was cool when you fast forward the sanding! I'm working on a 1990 ZR1 Vette bumper , this will help , thanks.👍👍

@designerbumpercovers-luxur7673 6 жыл бұрын

Fully understand and respect your view. Our products are not everyone.

@pauliusgedrimas978 6 жыл бұрын

awesome video, i'll be trying this method this week on my car. Thanks again.

@Gitano281 6 жыл бұрын

Very helpful vid. Great narration. Thanks man.

@gazzablanca 6 жыл бұрын

Cheers mate. Love the accent. Great video. I learnt a lot.

@paullomas4620 6 жыл бұрын

You sir... are a gentleman!!

@philtrottier4442 6 жыл бұрын

Excellent! this is by far the best video I have seen to repair that type of damage.

@AlanVonGoodleef 6 жыл бұрын

Subbed also. thanks for the good video bro!

@motasralucamaria 6 жыл бұрын

There are many factors in doing a pro job. One resource I found that succeeds in merging these is the Magic Painter Method (google it if you're interested) definately the most incredible info i've seen. look at this great website.

@halifax5309 5 жыл бұрын

Ur Videos are absolutely amazing

@R0GUES 5 жыл бұрын

I've been painting and repairing cars for 30 years I do love reading all the comments lol highlight of my day 😘

@JohnnyB43 5 жыл бұрын

Excellent tutorial - thanks 👍

@imachildofthemosthighgod2906 Ай бұрын

Magic eraser helped with those types of scratches that truly amazed me 😅

@gaming2121 6 жыл бұрын

Amazing. Great job man.

@johhny212100 3 жыл бұрын

As much as this is a great video it's not for amateurs , you need a shed for one , it's time consuming, it's not worth the hassle for someone to try it inexperienced. Not too knock your video it's brilliantly done...I had to get my corrected by a panel beater, still glad I tried it. I def recommend watching it a few times and do small parts at one time.

@fatmaalramezi7504 5 жыл бұрын

Cant believe it it looks amazing

@smauringhojai 6 жыл бұрын

Can you please give me the names of products used in the process?

@Ag3nt0fCha0s 5 жыл бұрын

I scratched my door and cannot be bothered to make all this effort. I think I will just buy a new car.

@zaink7037 5 жыл бұрын

Why not buy a second hand one? My car has around 3 pin dents on the passenger door. I was thinking how much would it be to pay someone to remove it but I forgot I could get a second hand door

@nigelfarrell8860 4 жыл бұрын

Lazy shit 😂😂😂

@Ralph1826 4 жыл бұрын

Ag3nt0fCha0s I respect u for being honest

@sumitgupta6842 4 жыл бұрын

Hey everyone, the best results that ive ever had was with the Magic Painter Method (i found it on google) without a doubt the no.1 course that I have ever tried.

@Vlogs_of_JP 4 жыл бұрын

Hahahhaah

@robertcain3426 3 жыл бұрын

A tip. Apply the filler first and then sand the whole thing once. Yes, it's unorthodox but the deep part of the scratch has already been abraded so it will stick unless it's an old repair and has been waxed.

@MichaelLesesne 5 жыл бұрын

Note: Don't tape the side you aren't painting. You'll have a hard line. Some fall over from the paint is okay. You can always buff out imperfections later. 👌🚗👍

@lightskinsosa9220 5 жыл бұрын

Mike Lesesne what can i do if i end up with that hard line?

@C4shmoney 2 жыл бұрын

I used a curved paper edges because of chris fix' shit and now i have a hard line! fuckkkk now i gotta repaint my shit and do primer, base coats and clear coats again sighhhh

@paulhunter123 2 жыл бұрын

@@lightskinsosa9220 fine wet and dry the line in and buff up with compound

@masonzizovski449 Жыл бұрын

@@paulhunter123 Do you do this before or after clear coat?

@paulhunter123 Жыл бұрын

@@masonzizovski449 before bro

@scorpion-qp6vs 5 жыл бұрын

u need to use blend out thinner so u don't get a hard edge and probably get a coloured matched aerosol from an car paint supply store because hycote only have standard shade color in there aerosols just a tip.

@simonwale6993 Жыл бұрын

Thanks for this. Now I know how to repair a scuff 👏👏💯🙏

@lastmanstanding2789 5 жыл бұрын

Great video and easy step by step guide which I would have no problem following and achieving... But this is my main problem !!!!! How to correctly match the sprayed area/colour to the original colour ??????

@Zodliness 6 жыл бұрын

Nice simple informative video. It done just the job for me.

@costym.2328 3 жыл бұрын

Felicitări pentru aceasta prezentare .Succes

@jessechapman6633 4 жыл бұрын

Amazing video seriously good work there

@coyote5735 5 жыл бұрын

The only thing I noticed was the overspary on the left of the bumper @ 8:42 there is a definite line in the paint from where you removed the masking tape.

@brzcz 3 жыл бұрын

You make it look so easy

@patrickarseneault7407 5 жыл бұрын

great video but one thing you never do is cut a panel or bumper in half to prevent paint from going over. what it will do is leave a line when you tear the tape off like what happen at 8:40 . you should be better at leaving it open and light spray over to do a blend in

@harleydavidson82 6 жыл бұрын

Wow Nice Job Buddy ! All Videos are Great

@Mad4Motors_ 6 жыл бұрын

hey that means a lot! thanks

@3791omar 6 жыл бұрын

Great job!thanks for the video.

@francescobianco1135 5 жыл бұрын

complimenti un bel video sicuramente continuerò a seguirvi

@claytonsetuki6260 3 жыл бұрын

Truthfully, not bad for a DIY. Not bad at all. Well done and many thanks for the informative video. Still sceptic to try it out by myself, though :-)

@anishnair7245 6 жыл бұрын

Sir can you please add links to the various items you have used???? even some description notes should do...

@SANDWICHSD 5 жыл бұрын

That'd be great

@teekhan238 3 жыл бұрын

Halfords

@marlawatching 6 жыл бұрын

I recently scratched my car on a column and the body shop is quoting my really high prices. It is burgundy Fiat 500 so what will I need to get do the repair myself? Sanding papers (of different sizes), body filler, primer (should I look for a red one?), the actual paint colour, and what else? Your reply is much appreciated

@ALEXANDERCRETA1 5 жыл бұрын

How you remove the line to the left from masking paper tape that makes the differend to the old paint from the new?

@godemon_with_jls6948 3 жыл бұрын

Usually paint shop persons blend it by wet sanding with 3000+ sandpaper and buff it with compound

@andrewwilliams3709 5 жыл бұрын

The black moulding will just pop out, leaving it there made an easy job a bit harder.

@justaroundthecorner2883 2 жыл бұрын

Many thanks for the upload. Why did you have to spray such a large area?

@bidin2011 6 жыл бұрын

remove that black trim to make easier and get better finish, it pops out easy

@oftheknown 5 жыл бұрын

Great video fery informative

@mazman8343 6 жыл бұрын

Plenty good its not a rolls .good job

@rockinvida1960 2 жыл бұрын

Looks really good but I’ve read you’re not supposed to use bondo filler on a plastic bumper? Thoughts?

@PPSEPS 3 жыл бұрын

Excellent work Thank you

@mr.skeptical3071 6 жыл бұрын

Do you have to get exact matching paint, or just close...if it's not exactly same do you have to repaint entire bumper?

@survivethrive2468 2 ай бұрын

Man that looks awesome! I just curb rashed my front bumper and its killing me knowing its there underneath. Smh

@ricardocuevas7815 6 жыл бұрын

GREAT vid. Good job.

@marinacrespo1 6 жыл бұрын

So I saw this video and the one on how to fix the clear coat. If my panel has a scratch like this and also clear coat peeling off, which products should I use?

@medievalmusiclover Жыл бұрын

Nice Jod Sir. Amazing! Congratulations for great videos.!

@Aesir5 26 күн бұрын

1:51 you do much better body filler application than me!

@sicktwistedkids 6 жыл бұрын

Just a TIP don't tape the other side of the bumper when applying the colour and clear coat or you'll end with with a picture fame affect like you did in the video where you can tell its not bleeding into the paint

@juniorelleston81 5 жыл бұрын

Would love to see this exact damage on a white car bumper

@jeffreycote2383 3 жыл бұрын

That’s exactly what I have

@markcassidy5980 5 жыл бұрын

Great vid really easy

@prettypaws3115 3 жыл бұрын

Just amazzzzing! You're a real Pro! WOW!! Question - does the primer need to be the same colour as the vehicle? Also, I have tiny wells on my hood. I think that's what they're called. Would I use the same method as above to repair this chipped paint?

@geoffroyfalot3583 2 жыл бұрын

No it doesn't

@thepro08 6 жыл бұрын

my dad car mechanic should see this, this is how to do it, cant still believe the guy powercoded it to be brigther and left the scratches..... i just have to look at it everyday....

@125sm3 5 жыл бұрын

New subscriber, just came across your channel. Great videos and instructions.

@Tigermoth24 3 жыл бұрын

Be better if we saw the area where it was fluffed off along the bumper, you normally have over spray and when buffed n polished it shows a line like a join.

@justine7143 6 жыл бұрын

☺️ lovely narration

@mohssinmian4264 6 жыл бұрын

Very detailed and well explained, thanx for this video,

@rayblessing9058 3 жыл бұрын

Thanks for the technique! Where can someone buy the spray paint to match the make and model of the car? This information would be extremely helpful to your viewers!

@bc-mr1si Жыл бұрын

ebay😊

@jydeda5004 6 жыл бұрын

Very good tutorial - Is it okay to use a cordless sander instead of manually doing all that scrapping and smoothing?

@Mad4Motors_ 6 жыл бұрын

If you have one use it it will speed the process up!

@okac98 6 жыл бұрын

excellent & well done ...like it

@timvu3095 3 жыл бұрын

Very good and clear instructions on how to repair and repaint the bumper. However, I can see a line where the tape was on the left side of the painted area, meaning that the paint won't have a consistent color with the rest of the bumper. He should have repainted the entire bumper, so there is no line and the paint color would be consistent across the entire bumper. Even if you can get the same paint using the color code from the manufacturer, it does not mean that the new paint is exactly the same color. It appears that he did the work outside in the drive way or the street, which is no no for painting. You can do all the sanding, body filling, and scuffing outside to keep the dusts level down but you want to paint inside a garage or close space, so you don't get air borne contaminants to settle on your wet paint. The best option at home garage is really using plastic liner and masking tape to make the enclose space big enough to keep the car inside and prevent the dusts from settling on the paint. Of course, you would want to wear decent respirator for the entire time including sanding, cleaning, painting, etc. to protect your lungs from the nasty dusts and aerosol paint. He is right on one thing, the painting has to be done at the right temperature and humidity so that the paint can dry and cure properly or it won't last.

@ptsdmentalhealthuk 3 жыл бұрын

Nice results. I just wish I could sand at fast as you 1:00

@tataynigimo3551 5 жыл бұрын

Wow! Great job! I just stupidly bumped our car into our wall. Now the left side rear bumper has a crack and the sides of the bumper has a long scratch. I hope I find the right red color though. But thanks!

@Mad4Motors_ 5 жыл бұрын

Yes give it a try!

@Thesanaraheem 2 жыл бұрын

I scratched or I should say scuffed my inside car frame (front passenger door). Went to kfc drive through it was dark and quite narrow (never used drive through before). I’m quite worried. Husband doesn’t know yet 😭

@BlackMambaKO 5 жыл бұрын

Since you didn't sand whole bumper with 800 wet, what does happen to the area that you didn't sand but you put clear coat on?

@johnbrown9092 6 жыл бұрын

Great job!

@toddk1479 5 жыл бұрын

Would you need to buff it out with an all in one polish sealant in a day or so?

@rahulphukan5396 4 жыл бұрын

Does the paint differ from original when we have a closer look and will it fade with time

@MrAlvarez23 6 жыл бұрын

I just watched this first videos and I have to subscribed, such a great job💪💪. I will deft try this on my car. I have a question when you used the primer where can i find out what color do I need for my car?

@Mad4Motors_ 6 жыл бұрын

Hi colour code should be on a plate in the Engine bay or some cars inside a door

@MrAlvarez23 6 жыл бұрын

Mad4Motors Thank you so much for your quick response, your videos r great good job. I'll deft try to do this on my car.

@sndyansyria 6 жыл бұрын

Thanks great..I think you forget list of component ..in addition to sandpaper what is the name of the yellow material?

@Mad4Motors_ 6 жыл бұрын

Hi standard body filler or bondo in the usa

@zillellaha7854 5 жыл бұрын

I have VV Passat 2015 Sedan Dark Mehron color and i am thinking to apply paint to my car front and back bumper along with removal or scratches. Would you tell me how do you choose a proper paint for your car ?

@janparchanski9242 10 ай бұрын

you should use 600 grit sand paper max, then primer, paint, clear coats, paint blender

@markdaniele4539 5 жыл бұрын

This dude actually owns an expensive body shop and he is hoping that everyone here follows this video and then comes to his shop because of the two different color bumpers.LOL.Just joking Mad4Motors.You tried to help and that's nice of you.

@MichelLinschoten 5 жыл бұрын

You need to start with 80 sand it until the BLACK do not do it like he shows, as the filler will not grab on well on the finish of the bumper! Then you will see deeper scratches fill those. Then use 80 again to take it off the filler. Then use 180 to smooth it out gently and primer it, a couple times then fine sand it, then paint it

@stephenfalken Жыл бұрын

Nice tutorial! I need to repair our silver Focus. One question though... after sanding sanding the filler and moving to 180 or higher for the area,, how do you know when you've sanded enough?

@AllectTv 10 ай бұрын

I guess when it’s smooth enough

@PaulA-zp7hn 6 жыл бұрын

Thanks for this great video. You made it look so easy! Two questions for you (or anyone else that might be reading). I just scratched my car (also a Seat) and I am gutted :( It was on the the back quarter panel, so not plastic, but metal and the scratches go down past the under coat. Is your video (and all the materials) applicable to that? Will it work? I really hope so..... Oh, and subbed!

@Mad4Motors_ 6 жыл бұрын

Hi yes it should be a similar repair to this one, just take your time and make sure each step is done before moving on to the next step!

@PaulA-zp7hn 6 жыл бұрын

Thanks!

@nelno 6 жыл бұрын

Tape over the molding so you won't scratch it while sanding.

@AndyLouHongkong 5 жыл бұрын

Nice dude!

@hmikey5680 5 жыл бұрын

Was the filler p40 or p38?

@adibartosiewicz3388 5 жыл бұрын

When I got the paint mixed up in a can do I have always put a clear coat on?

@eugendabija57 4 жыл бұрын

Colour looks well but, I have lines between painted parts because I didn’t tape only the bumpers. What should I do?

@sheilabeynon9387 5 жыл бұрын

Steve fry fan 80-90

@morgandennis7215 Жыл бұрын

How would you fix the black trim if it was scratched? Sanding or heat gun?

@leklusakkoklu 4 жыл бұрын

Hey you. I saw picture-frame effect at most left side of spray but you did not show it.

@stephaniecarr6984 4 жыл бұрын

Great vid...it's even worse when someone ELSE caused it.. came out of the store yesterday and found a huge scratch...sigh. I want to try this...it'll save me a 500 deductible. Where would I find the paint to match my car- the dealer?