Your mistake was pulling it off at the farthest edge - and pulling it with too much force. If you had centered your force on the farthest green clip it would have been much better and would have come off with little chance of damage. It's always best to be gentle with these plastic panels and to use as little "follow-thru" force as possible. Get the clips to "pop" and do not strong-arm them. And I need to thank you for this advice as I have just successfully removed the same panel on my 2022 CR-V because of your warning. Let me just say that very inexpensive plastic pry tools would have worked much better to pull these panels loose.Thanks again ! I am from NYC, USA.

Thanks a lot! Very helpful! 👍🏻 🇧🇷

awesome! gonna try this out

Witam, to jak wyjac ten panel bez lamania zaczepu? Dzieki

Tanks a lot!

I guess that it would be good enough to put silicone glue only on the gasket instead all the edge, in fact, not all the edge is engaged with the seal

👍спасибо

Hi, What's the name for the part that you removed. I am trying to find that piece, but have no idea what it is call. Thanks

Zawsze daję łapkę w górę, ale jakoś tak zaczynam myśleć , że tu nie idzie o stałego widza, tylko liczbę wyświetleń. Wersja w języku angielskim... Montaż klapy do ubikacji... Jak dla mnie - inaczej się ten kanał zapowiadał. Życzę powodzenia i nie zamierzam hejtować, ale to już nie mój klimat.

What a stupid wrong approach