most underrated video ever. I've been so frustrated that manufacturers insist on only selling panels with the AG film.
@allthejazz02 жыл бұрын
i agree. but do it must be have huge brave...
@justobserving48622 жыл бұрын
I agree
@rockl79 Жыл бұрын
as I unfortunately found out the hard way, now they not only have them with the AG film but the polarizer layer is built into it as well... So if you want to do this on some you have to remove the polarizer and then replace it with a glossy one
@Willy38134 Жыл бұрын
I understand why they do it but I wish it was easier to remove (like hot swappable)
@ktulhu20009 ай бұрын
@@Willy38134 but why do they do it? Apple pays them to produce shitty stuff?
@MaxLohMusic4 жыл бұрын
Why is Apple literally the only company in the world that makes Glossy monitors (which cannot connect to PC), and why does every other company allow Apple to hold a monopoly over this section of the market?
@tomkosdiy4 жыл бұрын
No idea. I might start a glossy monitor company of my own haha, there have to be some people that would buy nicely designed monitor with glass.
@MaxLohMusic4 жыл бұрын
@@tomkosdiy You should totally do that -- someone's got to, lol
@Deffine4 жыл бұрын
@Theodore Nguyen Those "glossy" Dell monitors actually have a dirty filter in them.
@andy91534 жыл бұрын
Tell hp to make 1440p version of the HP 2511x. I just did through facebook. Only way to make companies make these is if we keep bothering them on social media
@SpartanLaserCanon4 жыл бұрын
I would prefer matte screens on phones because of the fact that in high sunlight you might need to put your screens brightness near a macs and you could honestly get some super accurate colors still with some matte screens if they are built right. My Samsung monitor has super accurate colors with the color calibration I used on my mac. It has almost exactly the same colors as my Macbook ever since I callibrated it with the built in color calibration thing which means it is super accurate. My Macbook Pro is the latest one without the touch bar. I understand that people have preferences and can see colors differently on some matte screens, but that does not mean all of them do not look as accurate as colores on some of apple's displays. Apple is known for color accuracy and even my Note 9 on bassic mode when I don't use the blue light filter can look very accurate like some Apple diplays. I do recommend using blue light filters if you don't mind the colors at night. I have mine on a schedule and set low. Even set low I can notice my eyes and brain getting more ready for sleep. I turn blue light filters off for art and photo editing though because I like the accuracy of colors when it's not on in Basic mode on my phone. There are some very good matte screen protectors for some phones out there. Matte black can be dark enough to my eyes on some monitors to my eyes.
@CubicIronPyrite Жыл бұрын
Every Manufacturer: "Lets add a shitty blurry layer so you can reduce (but not completely remove) glare in lighting conditions which can be avoided!"
@Daniel_WR_Hart Жыл бұрын
I keep seeing pictures and videos of people's setups where they *don't* have their backs against a windowless wall, and some of these people even have glossy displays
@Howlsowls9 ай бұрын
to be honest it doesnt even help, the glare is still there, just covering a way bigger area of your screen
@simp-slayer8 ай бұрын
Imagine buying a 4K HDR monitor and getting worse image quality than a 12 year old FHD TV.
@DeliciousDogMeat3 ай бұрын
a non-blurry image is a premium feature
@BCterminated2 ай бұрын
Every Manufacturer: "Lets add a shitty blurry layer so you can reduce (but not completely remove) glare in lighting conditions which can be avoided! Lets also manufacture a great looking glossy OLED 80 inch TVs most likely situated in a bright living room environment. It is also therefore less portable than a 27 inch monitor"
@main_stream_media_is_a_joke3 жыл бұрын
With proper light arrangements, one can avoid the mirror effect from a glossy screen to a large extent and imo the glossy screens display colors with WAY more 'pop'. Never been a fan of ag matte screens personally.
@snaj99892 жыл бұрын
I finally did it. I hesitated for a year and looked for something sacrificial before trying on my main monitor but I bit the bullet today and removed the shitty matte plastic on my monitor. Now it looks perfect.
@White_Polar_Bear10 ай бұрын
When you peel off the outer layer, underneath it, as far as I know, there is a polarizing filter. Isn't it dangerous to use the screen in this way? Isn't there a possibility of distortion? I would appreciate it if you share your experience.
@snaj998910 ай бұрын
@@White_Polar_Bear I am still using the monitor in question and it is working absolutely fine. I guess you would want to not touch or wipe the polarizer as much as possible to avoid damage. Don't do this on laptops though because some have just matte polarizer on top layer and bad things happen if you remove it.
@andrefagundes62714 жыл бұрын
Glossy image is way superior but I don't have the balls to do it, my monitor is too expensive to risk losing it.
@tomkosdiy4 жыл бұрын
Agree 100%, unless you deal with heavy glare on the regular, glossy is way superior. You could get couple older monitors on craigslist and try it out for a few times first :-)
@andrefagundes62714 жыл бұрын
DIY KOS true man I had an iMac before my gaming pc and the image is stunning I have no problem with reflexes in my room so it would be awesome removing the anti glare. I live in Brazil don’t know if I can find cheap monitors for experimentation but I will make contact with Acer Brazil to see if they can recommend me a professional to do this mod. Great content it’s very hard to find this stuff
@tomkosdiy4 жыл бұрын
Thank you very much! The most important part I think is, when you are peeling the layer, to watch out for peeling just the white antiglare one. The dark layer under it is the polariser, which you need to keep on. You could also maybe take a look around your local scrap yard, if you can find some older monitors to practice on. Anyways, good luck!
@alisur7364 жыл бұрын
IMO can be risky because can damage Your eyes.
@electrickrypt3 жыл бұрын
@@alisur736 Are you sure???
@elliotpolanco1593 ай бұрын
This video needs to be shown to every matte freak
@GoatedEdits892 ай бұрын
💀
@ivanpua4 жыл бұрын
Thank you, it is fantastic, but I think it would be appropriate to note that after doing this it is very delicate to clean, it can easily damage the polarized.
@tomkosdiy4 жыл бұрын
Great point!
@maxfuchs79952 жыл бұрын
if you do this, it might be a good idea to get a fitting glass plane, and mount/glue it to the display, like it's one in iMacs
@TimberWulfIsHere2 жыл бұрын
maybe use ceramic coating then
@johng52612 жыл бұрын
@@maxfuchs7995 and where would you find that? probably have better luck with a plastic of some sort
@tsushima332 жыл бұрын
⚠️ YOU HAVE TO SOAK IT. Only after 1,5 hour I managed to remove the anti glare layer. But DO NOT FORCE IT, if its going hard to peel off or you will rip the lower polarization layer. My monitor is DELL U2718Q 4K. A couple of lines from the middle to the left, which are appeared when I forced to peel off. Cause I was slow, and the anti glare coating adhesive started to dry and kept hardening. Keep in mind. Almost satisfied the result. And sorry for my french. :]
@giotphan96732 жыл бұрын
but will the water get into the deeper layer of the monitor ???
@tsushima332 жыл бұрын
@@giotphan9673 Didn't mentioned it btw. I've put paper towels on table and filled them with water so they were very wet. And then I've put the monitor with face down. So this way the water will not come up to monitor parts. It requires flat surface.
2 жыл бұрын
how much soaking? I mean, I had toilet paper over the monitor, wet them with a sprayer every 2 hours or so. After about 7 hours I tried to remove, but nothing came out. My monitor is the LG ERGO 32". Only did some visual damage at the very top corners attempting to remove the coating with my nails. Gladly it didn't affected the image, is at the very corners. Like, seriously, I think besides what I've done, only if I bath my monitor :D
@tsushima332 жыл бұрын
@ 7 hours is more than enough, hmm, thats strange. here i tried to remove it without soaking, you can see there are two layer os coating, one is polarisation and second is matte film. kzfaq.info/get/bejne/iL6SqbeQx7C2eKM.html
@Terra1012 жыл бұрын
@ I'm no expert but I think you might have tried to peel of the polariser film or whatever it's called. Is the picture missing where you tried to peel the layer off, or is it just shiny?
@CheckitOutYaw4 жыл бұрын
Everybody doing this. Its a small extra step on step 6 to remove the power unit and display circuit board (4-6 more screws and unplugging 2 cartridges). When you soak your the coating you have no chance to ruin these parts by condensation. Depending on the monitor, i often manage to peel the protective coating after 1 hour soaking and some needs like 24 hours. And you should not have to force it..it should glide off after u peel the corner. If u feel resistance like the one this guy had on the video dont force like what he did. Check wether the coating is not partially clipped in to the secondairy basel. If not, let it soak a bit longer. trust me i've done this tons of times. Not to flame: This guy got lucky. I want to see him turning it on after this, instead showing us a before and after clip.
@socialreport2836 Жыл бұрын
Did you do it on G9 Neo or G8/G7 Neo? :)
@menoats3 жыл бұрын
I can't believe I can't buy a 4K USB-C glossy monitor anywhere! I might have to do this to an expensive monitor! Thanks!
@G-O-A-M2 жыл бұрын
dunno if you already saw/know it but there is the "Eve Spectrum 4k" now, it has optional Glossy panel and USB-C
@menoats2 жыл бұрын
@@G-O-A-M I did thank you. I purchased the apple studio monitor but if I ever need a new one I’m going for the Eve.
@RackaApps4 жыл бұрын
It's best to find a clear screen protector and slap it on there to prevent scratching the polarizer. It scratches very bad over time when cleaning it. That's what i do now when i perform this mod
@tomkosdiy4 жыл бұрын
Thanks, that is a great idea. I was thinking I would use regular 2mm thin glass next time I do this to give it a more of a premium look.
@xXxPhenom4 жыл бұрын
Hey guys, im gonna do this mod to my Asus MG279Q! Where i can find glass screen protectors for 27" monitor?
@jack_6404 жыл бұрын
DraKK did u find anything
@RackaApps4 жыл бұрын
@@xXxPhenom finding glass ones is very hard. Even a plastic one for 27 inch is very hard. I got mine from a local store and they are usually sold together with stickers
@brett200000000093 жыл бұрын
@@tomkosdiy Also some monitors have ag coatings so thin they are impossible to remove this way. So the only way would be removing the polarizer and buying a glossy polarizer from china they come with glue pre applied and plastic protection on both sides tricky tho. at least with that you wouldn't have a raw exposed polarizer.
@TabalugaDragon4 жыл бұрын
Thanks for the video sooo much! I hate the monitor manufacturers for making us risking our devices instead of making monitors without matte coating in the first place! I only use 16:10 monitors and there are no glossy versions, they are non-existent. Same for budget gaming laptops, ALL of them are matte.
@lsg3033 жыл бұрын
HP have
@TabalugaDragon3 жыл бұрын
@@lsg303 not in gaming laptops. Office laptops are too weak for me.
@lsg3033 жыл бұрын
@@TabalugaDragon I know but monitors from HP and DELL both have glossy screen type, also it is 6bit+frc mostly
@TabalugaDragon3 жыл бұрын
@@lsg303 I only use 16:10 displays, and there are no glossy ones among them. I looked. A lot.
@lsg3033 жыл бұрын
@@TabalugaDragon W2558HC if still there?the true love
@duff5000 Жыл бұрын
The comparison at the end is pretty bad lmao. I like glossy but the difference at the end is way over exaggerated. You can clearly see the after has no direct light from the outside window but in the before the sun is hitting it since the blinds are open. Pretty misleading.
@ajayvailaya20912 жыл бұрын
Holy crap dude.. this is insane.. u r a genius..m doing it today.. wish me luck
@techalyzer2 жыл бұрын
I would be very nervous about the soaking part. I destroyed a couple of screens like this, water just infiltrates between the glass layers of the panel and it either shows up directly on the screen as a black expanding blob or it destroys the electronics by shorting out the traces that go to each pixel row/column, and it takes very little water for that to happen.
@_ch1pset Жыл бұрын
Can't short a circuit with distilled water, unless of course it picks up conductive contaminants.
@techalyzer Жыл бұрын
@@_ch1pset But it can go inside the screen.
@_ch1pset Жыл бұрын
@@techalyzer I think if the water got under the screen, it was probably too much water, or a manufacturing defect. However, I'm not sure distilled water would have the same effect that you are describing. Distilled water is not conductive, and it can't cause a short, unless it gets contaminated with something that is conductive. It's not that it can't cause damage, I think it can still cause corrosion, but I don't think this is an issue for LCDs. I'm not a materials engineer, so I'm not quite sure, but I don't think LCDs are prone to corrosion. If you get water on copper wiring, however, that's a different story.
@Iridium.10 ай бұрын
Put the monitor facing downward , on top of the soaked towels .
@gimmy2294 Жыл бұрын
That anti glare film is disgusting. Matte coating is usefull on outdoor laptops or in monitors for "family/office" multiusers. Matte is the multimedia death.
@TMProjection4 жыл бұрын
worked perfectly, just had to remove excess residue after using window cleaner and lint free cloth, thanks a lot
@tomkosdiy4 жыл бұрын
Glad it helped
@frich2k Жыл бұрын
Bro you are a life saver, the window cleaner method applying a tiny bit of pressure helped me to remove the leftover glue/compound after removing the matt layer. Thanks big time! :D
@paWD404 жыл бұрын
I need to try this on HP 25f. I hate antiglare, tested so many monitors and all have haze and light color distortion and 178’ view angle is bs becase of this. I have old HP 2511x, glossy, and despite old technology is better then any new monitor. I think all monitors should come glossy like cell phones, and if some (or most) people don't like gloss they can always put some film. Anyhow thanks for the video. I'm glad to see it's possible to "clean up" the monitor
@justinbentleybse4 жыл бұрын
Cool video, Ive done that twice except I open the bezel from the outside with either two butterknives or hard thin metal spudger/prying tool/spatula's, small tip is to fold the glass/polarizer/3m blah-blah (top) layer out of the enclosure and sit them beside each other on the towel before using the paper towel and water just in case you were to use too much water and have to blow dry all ~10 of the layers that it encloses, layer by layer ;)
@joaquincarreteromartinez13644 жыл бұрын
Bro i just followed your steps and it worked. THANK YOU!
@asdbef36673 жыл бұрын
Stfu liar
@electrickrypt3 жыл бұрын
@@asdbef3667 lol....
@marcelfernandezromero89054 жыл бұрын
You failed at showing the most important part, removing the corner. But very good video over all.
@electrickrypt3 жыл бұрын
Any tips?
@marcelfernandezromero89053 жыл бұрын
@@electrickrypt use a needle to lift the very thin plastic mate sheet. It is very thin. Thinner than a glass screen protector. It is as thin as a hair and it.s not hard. So if you see any resistance it means you are removing the sheet below which should not be removed
@electrickrypt3 жыл бұрын
@@marcelfernandezromero8905 thank you, sir.
@SM-by8mg4 ай бұрын
That sound when you start peeling the anti glare sheet is so satisfying😅
@Brenzle2 жыл бұрын
I did this on my LG 24MP59G and it worked flawlessly! I put 2-3 layers of wet paper and after 3 hours it peeled off without any issues :) Just be aware not to peel off the dark layer, only the transparent one!
@White_Polar_Bear10 ай бұрын
When you peel off the outer layer, underneath it, as far as I know, there is a polarizing filter. Isn't it dangerous to use the screen in this way? Isn't there a possibility of distortion? I would appreciate it if you share your experience.
@Brenzle10 ай бұрын
@@White_Polar_Bear The polarizing filter is more fragile than the anti-glare coating, it's a little softer. I suggest keeping the wet paper for a bit longer just so the anti-glare layer is easier to peel off. I kept cleaning the monitor with a window cleaner and a cloth and it didn't cause any damage to the polarizing layer. It behaves normally, just like a glossy laptop screen would. It's a bit harder to keep the screen looking clean since a fingerprint will stay on it, unlike on the anti-glare coating. I don't touch it often since it's not a laptop screen, so it's not that big of a deal. A more important thing to keep in mind is the lighting setup in your room. If you have a window behind you or use ceiling lights very often, you'll get a mirror effect from the screen, which is especially noticable on dark images and low brightness settings. This is a big issue with a setup where the window is behind your back (mine is the exact opposite). Also, I aways use my desk lamp instead of ceiling lights and I like my room very dark (monitor brightness set to 0) so that wasn't a big issue for me. All in all, I'm satisfied with the end result, no new issues after about a year of use. It may be a bigger compromise to make in case of having to alter your current setup to avoid the mirror effect, but if your setup is similar to mine than it should work quite well. The benefits are as shown in the video - colors are a bit more vivid and blacks are more black. Not like on an OLED of course, but much better than on a stock, matte IPS display.
@White_Polar_Bear10 ай бұрын
@@Brenzle Thank you for your answer
@RitzyBusiness9 ай бұрын
@@Brenzlejust to be clear, after the AG coating is removed cleaning the monitor is not much more difficult? I was worried the polarizer wouldn't be robust enough to survive cleaning.
@Brenzle9 ай бұрын
@@RitzyBusiness I clean it regularly and it doesn't get damaged from that at all. What I meant by more fragile is I think it might get damaged if the AG layer is not soaked enough and you start peeling it off with a lot of force. Be patient and it should peel off just fine :)
@andressalexandregutierrezf75218 ай бұрын
I did it on mine and it fucked the screen
@YD_.4 ай бұрын
Do you need to remove the panel from the housing if the bezels don’t cover the edges of the panel
@Richdadful2 жыл бұрын
I always knew there is something wrong in picture quality of monitor. TVs just look too good, basically its matte finish which creates a big difference.
@blluryface37252 жыл бұрын
Thank you so much for the video!!!! The trick have worked out perfectly for me 🥳🥳🥳🥳
@trayoibry82462 жыл бұрын
wich monitor do you have ?
@tomkosdiy2 жыл бұрын
You're welcome!
@evilmarc2 жыл бұрын
@@tomkosdiy Is the panel still good 2 years later?
@nadruf2 жыл бұрын
before i came here, while i was looking at my monitor i talked to my self.. "wait a minute can i remove anti glare on my screen" 🤣🤣
@pillow73062 жыл бұрын
damn, ive been mislead so many times, i once thought i can get free electricity for a magnet when i was younger, and when i saw the paper towels i thought it was gonna be fake but this turned out to be a helpful and informative tutorial. subscribe worthy
@Strangepete4 жыл бұрын
I have the Dell S2740L which is a glossy IPS monitor and I love it. Even though it is 1080p it honestly looks as sharp and more vibrant than a 1440p 27 inch monitor with anti glare coating. I wish there were many more options for glossy monitors, I would like to increase to 4K but not sure if I want to do that if it won't be glossy.
@mixedup58584 жыл бұрын
Dell S2419h
@manny_f2 жыл бұрын
To be fair both glossy and matte monitors have their merits, it really depends on your lighting conditions. It would be nice if they were offered in both as an option, but I assume that would increase manufacturing, administrative, distribution and storage costs. I know a lot of people prefer anti-glare. I don't mind either. If the coating material was as tough as smartphone displays (gorilla glass etc), I'd prefer that.
@DavidSoeiro5 ай бұрын
Thanks for the tutorial. I'm going to change monitor soon, as my current monitor is matte (Asus PB278Q) and my future monitor will be glossy (probably OLED), I wanted to see what a glossy monitor would look like in the room where I have my PC. As I'm not patient, I removed the anti-glare after only an hour 😅 By removing it, I thought the screen was broken but in fact, the anti-glare plastic was torn. That said, I managed to remove the torn pieces without having to add paper and water. After putting everything back together, I turned on my PC and my god... what a slap I took 😱 My monitor already had very good image quality but now, the image is magnificent 🥰 I'm still going to have to change because I play a lot and my monitor is limited to 60Hz but the image quality is so much more beautiful after removing the anti-glare...
@04dram042 жыл бұрын
wow amazing. The anti glare mkes it look like a super old lcd monitor.
@bennemann3 жыл бұрын
The way you compared the "before and after" at the end of the video is very dishonest. At 9:14 you film the coated monitor from the side, which especially with TN panels (which this LG seems to be) will massively reduce the image quality and brightness, whilst when the coating is off you film it from the front. From the angle alone, it would already have a massive difference even if the coating was off on both pieces of footage! There is something very fishy about the comparison at 9:10 as well, the monitors really don't look that yellowish with the coating on.
@nakinr18042 жыл бұрын
Didn't notice it! Nice catch
@sal86974 жыл бұрын
by removing that did you notice a more clear and colorful picture ?? and is it worth it ??
@aaroncharles0073 жыл бұрын
I done this process so after this how to clean the display on a regular basis can I use a spray and cloth 🤔 r cloth with any liquid cleaner
@aaroncharles0073 жыл бұрын
@Pablo Carrasco just in the normal way sprayed and cleaned it no problem so far
@xvnbm3 жыл бұрын
If we only had some other way to block sunlight from our houses so that manufacturers didn't have to ruin our monitors...
@Jacktrack73 жыл бұрын
Yeah like curtains.
@ManuelAkaho7773 жыл бұрын
@@Jacktrack7 lol
@electrickrypt3 жыл бұрын
Haha exactly!
@Hiddentruth454 жыл бұрын
Hey! Will this work on Lenovo Laptop screen?
@soapyslice2 ай бұрын
Prob not
@EdwardJobling2 ай бұрын
You did an awesome job removing the AG from that TV. What did spray on the towel?
@kostistsiutras43732 жыл бұрын
this is LIFE SAVIOUR for Omen X27, Best monitor for competitive 1440p 240hz that is let down only by its super agressive matte AG screan coating.
2 жыл бұрын
You mod your Omen X27 ? Thinking about in my 1440P 144HZ Curved screen
@kostistsiutras43732 жыл бұрын
@ im trynna find someone to remove the screen coatin from said monitor since its super sticky and i think it wont work with wet towels trick. Like im willin to pay up to 200$ for screen coatin removal which is the worse Ive ever seen, other than that nothin even come close to this monitor for competitive 1440p, only Lenovo but it uses same panel from AUO so..
2 жыл бұрын
@@kostistsiutras4373 Yes sure of course it´s better. I´m talk with some TV/Monitor Tech but all of they refuse to remove AG Coating.
@mehulparmar99762 жыл бұрын
is there any good matte layer for lg ultrafine 5k which is very glossy!
@philippak472 жыл бұрын
Wd40 sprayed and wiped ontop will make the matte look glossy too
@processsquid20972 жыл бұрын
Guys be careful as i tried this on an old monitor to have more experience with my main monitor and i messed up. Somehow some water found its way under my polarizer and when i removed the anti glare coating then i found that my old monitor was really blurry and had small water stains under the polarizer
@socialreport2836 Жыл бұрын
Did you try to glue it back? (polarizer)
@Daniel_WR_Hart Жыл бұрын
I worked around this by placing the paper towel down first, but have it be inside the boundaries of the film, soaking it with water using an eye-dropper, then very carefully nudging the paper towel to just barely touch the edges of the film.
@socialreport2836 Жыл бұрын
@@Daniel_WR_Hart with which display did you do it? (model)
@Daniel_WR_Hart Жыл бұрын
@@socialreport2836 BenQ BL2711U
@White_Polar_Bear10 ай бұрын
When you peel off the outer layer, underneath it, as far as I know, there is a polarizing filter. Isn't it dangerous to use the screen in this way? Isn't there a possibility of distortion? I would appreciate it if you share your experience.
@ShubhamPednekarYt2 жыл бұрын
Wow day and night difference in sharpness 🔥
@marcelfernandezromero89054 жыл бұрын
Holy shit you are the man I didn't know this could be achieved. I will try it on my crappy acer TN monitor and then on my VA one. thanks man
@itachiuchiha-sk4sf4 жыл бұрын
Did you tried it ? And what was the result ? Does it make the color of screen more vivid ?
@marcelfernandezromero89054 жыл бұрын
@@itachiuchiha-sk4sf yes I did, it looks crispier and the colors pop up more. Here's an advice; use a safety pin instead of your fingernail when you peel the AGlare and the anti glade shouldn't be sticked to the polarizer when you lift the tip, if you feel you lift the tip and it's giving you resistance stop what you're doing because you are peeling the polarizer, the anti glade is another very thin layer on top of the polarizer which can't be seen you can only lift it with a safety pin,
@itachiuchiha-sk4sf4 жыл бұрын
@@marcelfernandezromero8905 thank you for your advice one more question , is it comparable to TVs glossy screens ? I mean in colors and vivid range..! Because i am searched for a monitor which have a TV vivid colors and crisp and after a very long time i realized that the problem was the garbage matte screen...!!😭😭😭 By the way what is your monitor ?
@marcelfernandezromero89054 жыл бұрын
@@itachiuchiha-sk4sf no os not comparable, is comparable with laptops screens that are glossy without a protective crystal. Normally glossy TV screens have a crystal before the screen itself, in this case the mate film as s layer of protection against scratches, when you remove it you leave it as a pure LCD, you know those screens that you push a little and you see some ripples. As for colours it depends on the technology, TN has bad viewer angles and quality overall but pro gamers prefer them because of the high refresh rate, VA are my favourite panels because I am no gamer and VA offers 3000:1 contrast, apart from oled these monitors have the best blacks and whites, making the colours pop even more. IPS panels are for people that want the best of both worlds and it's the most used technology right now on monitors, you can't go wrong with it, but be prepare to not have blacks, instead the darkest black is just a really dark grey, they have good colours and angles though. Really if you got money to burn buy an old TV with 55" that allows 120hz and hdmi 2.1, provided that your card accepts it. It has the best blacks, the best colours and still good refresh rate. Although you have to configure it in order to avoid burn in. Current monitor technologies are like a videogame characters, if you increase their magic they are crap at physical tasks and vice versa if you get what I mean.
@itachiuchiha-sk4sf4 жыл бұрын
@@marcelfernandezromero8905 i have a 55 inch TV already and the colors is so great and i have the benq ew277hdr 1080p monitor of course a matte glass and it is colors is bad honestly i don't know how to tell put the display looks like have a sand inside it and not have a smooth and crisp picture as the TV or the smart phones so i am confused wither i should remove the matte grale or not is it worth removing it ? I mean in colors and crisp..!
@Gearsandco2 жыл бұрын
i think i removed the pixel layer with it oops and now i'm left with the white back light. I dumped it in my recycling bin .
@Tonba1 Жыл бұрын
You removed the polarizer
@Gearsandco Жыл бұрын
@@Tonba1 yes I did and the funny think is if you ware polarized glasses you can see everything
@main_stream_media_is_a_joke3 жыл бұрын
Any idea if the AG 3h hard coating on a Dell S2721HN is easy to remove by this method? If the adhesive is too strong, it will totally ruin everything.
@ShubhamPednekarYt2 жыл бұрын
100th subscriber ❤️
@xforcen2334 жыл бұрын
Hello, thank you for the tutorial. I'm just wondering can I do this to my laptop screen, cuz my laptop screen is matte as well and I really want to make it glossy. And how many hours does it need to wet for the laptop screen?
@Syahmula4 жыл бұрын
5-6 hours he said
@TMProjection4 жыл бұрын
yeah laptop panels are fine, i just did mine
@ArifBillahOnGoogle3 жыл бұрын
I find it hard tp look at anti-glare monitors. Just hate them. It's much easier to look at a glossy monitor. Now only if the main stream manufacturers understood this!
@descarteslancaster9843 Жыл бұрын
After removed anti-glare coating polymer film, the surface of screen is sticky that can collect lots of dust and polarizer layer lose its protection layer, how do you solve those problems?
@Tonba1 Жыл бұрын
Air duster and faith
@simp-slayer8 ай бұрын
As someone else already mentioned, you can try to find glass screen protectors and apply them on top.
@EvoPortal4 ай бұрын
Do NOT try this on any current monitor or from the past 5 years. The matte finish and polarizer is now ONE single layer and has been for years. You WILL ruin your monitor if you try what you see in this video.
@basementdweller28303 ай бұрын
Oh shit for real?
@EvoPortal3 ай бұрын
@@basementdweller2830 Yes, I'm saying this from experience. I've done this trick a few times 10 years ago with great results. Then last year I tried it on my more modern Asus 144hz monitor and ruined it, upon further inspection of the layer it was ONE single layer. Matte finish with polarizer in one. There is a new method of buffing out the matte finish that I'm looking into now.
@KenKlejs2 ай бұрын
@@EvoPortal Any update? I was about to do this on my Lenovo G27q-20
@EvoPortal2 ай бұрын
@@KenKlejs I would do some research first before attempting this on ANY modern monitor. My Asus PG279Q uses ONE single layer for polarizer and matte finish. I ruined my monitor but I was OK and perfectly fine with buying a new monitor if didn't work. I've even taken a piece of the layer off and tried to search for a matte finish layer with a razor blade, there was NO second layer. I've done this on two other monitors in the past with success but they were 10 years old models. Manufacturers are no longer using two layers and have not been for years.
@KenKlejs2 ай бұрын
@@EvoPortal Thanks for the quick replay though. Might as well sell it instead, and save the funds towards a OLED panel with a more glossy texture then.
@johnathansmith10033 жыл бұрын
Did you happen to scratch the screen or have any residue to clean up between the matte layer and the screen? can you clean it with a microfiber cloth without scratching it?
@raghavsomani58282 жыл бұрын
Thanks a lot bro this is really helpful 🙂
@tomkosdiy2 жыл бұрын
Happy to help
@irishguy2000075 ай бұрын
Goddam it Tom;most people are testing to add antiglare product to their monitors. Swap the monitor with someone who would appreciate an antiglare monitor.
@Kayrist10608 ай бұрын
I tried it on my lg 20m37a monitor and it didn't work I have left it for 5 hours Junga and it doesn't work the layer is very difficult to remove
@ivanaramburo40302 жыл бұрын
Hey great video man . just had a question or two, do you use hot water and do you think you are able to use any paper type of paper towel ?
@cleangoblin20212 жыл бұрын
Uhm dont do it to Asus VG27AQ. The anti glare and polarizer is as one. I peeled off a bit to see if it really is and i just ruined the corner of my monitor. Also it has backlight bleed now :/ I really hate myself
@jalaskabtu4 жыл бұрын
I have 3 dells ultrasharp pros, and 1 old lcd but top 23 monitor, I will try with it, lot of fun :) lcd is less colorfull than led, I hope this mod can do an upgrade in image quality to the old samsung LCD gaming monitor. Thanks for the idea.
@digibluh4 жыл бұрын
All monitors are LCD. LED is the back lighting. LCDs age too... so i doubt it will look like it did when it was new.
@jalaskabtu4 жыл бұрын
@@digibluh you're saying that my old LCD monitor loses light and power in past years? I think you could be right, cause its very cloudy image now, poor light. Thanks
@tomkosdiy4 жыл бұрын
Let me know how it turns out! Good luck
@michellehavre68214 ай бұрын
Is that anti glare coating you are romoving??? What if it is the filter for excessive UV or harmful blue light from the LEDs. Removing it will be like looking at the solar elipse without wearing a protective lens. How are your eye sight now????? cornea burning sensation???
@jawwk2 жыл бұрын
FYI for anyone with an Omen X 25 240hz panel this will not work. The adhesive does not soften or loosen with water, even after 12 hours of being wet.
@kostistsiutras43732 жыл бұрын
i was about to try it on Omen x27 240hz
@Iridium.10 ай бұрын
Dang I was about to as well . The haze on these monitors is terrible . I wish I ve gotten a diff monitor back then .
@socialreport2836 Жыл бұрын
The modern panels are much more tough and it´s almost impossible to remove the film without damaging the polarizer.
@woofinu2 жыл бұрын
Amazing! I also much prefer glossy screens but I'm not brave enough to try this. Do you know why they are so hard to get, almost impossible?
@sepanta10823 жыл бұрын
Nice. Is it necessary to put a kleenex on the screen and wet them? Can't remove the matte layer from the screen without getting wet?
@tsushima332 жыл бұрын
I want to try it, but not sure it will work. Did you removed without getting wet?
@aksaks2070 Жыл бұрын
i find this couple of years. u r cool!
@RainbowCuga4 жыл бұрын
have you tried to clean the monitor with the polarizer on?
@tomkosdiy4 жыл бұрын
Yes, a few times already. I use slightly damp microfiber towel, when the monitor is cold and so far no problems at all.
@daemonvector462 жыл бұрын
Hello,can i remove the matte coating from my ASUS VC239H monitor? The reason i'm asking is because despite turning vividpixel off,making sure that the resolution is set to 1080 and adjusting clear text,the screen still looks pixelated. I've read online that removing the anti glare coating fixes this problem.
@cliqueimarketing5 ай бұрын
would a towell be enough if i dont want to use paper for this ?
@kouhaiii3182 Жыл бұрын
this DIY is definitely not for the faint of heart haha. i like the idea of glossy monitors, but i only have on monitor right now and i don't want to risk it knowing that it cannot be undone
@_ch1pset Жыл бұрын
Lol, I'm giving this a try, but I got hella monitors. I have 2 Dell P2214H monitors, so I'm trying on one, which was already not being used. I don't mind losing it, they've lasted me close to 10 years now.
@flyersluver4eva4 жыл бұрын
ive got an alienware m15 r3 , is it possible to do it to my screen? laptop
@JohnMarat2 жыл бұрын
Why do you need to cover the whole panel with towels, the towels in the middle with water do absolutely nothing and its the towels along the edge that does all the work loosening the glue for removal...right?
@simp-slayer8 ай бұрын
It's so crazy that manufacturers make a great display boasting about HDR, resolution, etc and then put a f-ing plastic sticker on it. It'd be so easy to just make it an optional addon. Most people play in a dark or dimly lit room anyway and no one is buying a monitor labelled as a "gaming monitor" for work stuff exclusively. Imagine having worse image quality on your new 4K HDR monitor than a 12 year old TV.
@simp-slayer7 ай бұрын
@user-bh6kf9lg9m Well I don't currently have a monitor so you don't have to worry about me trying this anytime soon, used to have an old TN monitor which I gave to my dad for his setup. I'm getting by with a Samsung QLED TV for the time being. When OLED monitors become remotely affordable, I'm going for it.
@mranon42023 Жыл бұрын
are you sure the water does anythign at all? seems like waterproof plastic
@swiftyguide Жыл бұрын
Yes it does dumbass maybe try it for yourself.
@nchandmouarya80943 жыл бұрын
Very Useful video for me and people like me. Thanks bro.
@darkultra Жыл бұрын
My previous monitor was a glossy IPS and the monitor I have now is ag coated. It too is an IPS and the colors would "pop" more on the previous one. I have no windows behind me and my room is a bit dimmed when I use my PC. I might try this trick on an old monitor...
@Tonywirthfilms2 жыл бұрын
Wouldn’t you want to use rubbing alcohol instead? Or is that corrosive to the panel.
@stansmith7445 Жыл бұрын
My monitor came with a diffusion coating that was just way too strong and foggy. Found myself squinting just to see sometimes, even at max brightness. Thanks to this video though, i was able to finally replace it 😂. I’m not a full glossy guy, but the new coating that I got is a good mix of both.
@FULLSENDFC7 ай бұрын
wow this video helpd me break my monitor is 3 mins or less
@siruno60244 жыл бұрын
i have an old hp e231 led monitore, do you think this will work in thismonitr
@tomkosdiy4 жыл бұрын
I see no reason why it should not, according to pictures I saw of HP E231, it seems like it does have the antiglare layer. Good luck!
@lulul9 ай бұрын
i hate these antiglare layers but all monitors and most laptops have them now.
@montysonful Жыл бұрын
This works especially great especially on "frameless" monitors. You don't have to take off the metal edging because there isn't any! Easy Peezy. Don't be afraid of this.
@Abrioso Жыл бұрын
have you dont it? which monitor? I have an Lg27GP83 and I am wanting to do this but anot sure how to dimsantle the monitor.
@montysonful Жыл бұрын
@@Abrioso Yes I've done it twice. Once with a "frameless" Dell and once with a Samsung that did have a frame. The Samsung was more involved was you have to open up the case, detach some wire plugs, which will only fit one way and in one location. (easy to get back in place-or take a picture) The remove the screen panel, remove the metal frame, not as difficult as it sounds, and begin the process. I kept my screens moist for 8 hours just to make sure. He goes over how to remove the screen fame in the video. Just take your time. It will work and what a difference. I can now buy any monitor and not worry about whether it is non reflective or not. When you remove the film you'll really see how hazy the screen film is. Good luck. His directions are good. Dismantling will mean taking out screws in back of monitor and prying open the case.
@Abrioso Жыл бұрын
@@montysonful thanks for the response man! You just pushed me to do it, I have it disassembled now and soaked, I will update in a few hours!!
@montysonful Жыл бұрын
@@Abrioso OK. You can do this.
@montysonful Жыл бұрын
@@Abrioso You should let is soak more than a few hours. As I said I waited 7-8 hours and also sprayed the paper towels as they began to dry
@highlander05141985 Жыл бұрын
Wonder how his held up cause mine worked fine than one day I saw all this like rips lines in the actual screen and they just stayed there. That coating must do something else than just reduce glare. Too afraid to attempt again because of that. 😊
@zenvir16804 жыл бұрын
Thats a great tutorial. I have AOC monitor with anti glare screen, but I doesn't bother me at all. Maybe because it is inside with no lights behind me
@seaque.3 жыл бұрын
sun is always behind me. sometimes i can't even see the screen.
@LunaticSpice10 ай бұрын
I cant understand why this is even a thing really. They should Just Release them without glare foil and who ever wants that Kind of anti glare could buy a foil to Put it onto the Screen Afterwards.
@captainprototype1874 жыл бұрын
I just cleaned my monitor with bio ethanol and tiolet paper, it scratched badly. The coat is ruined. Is this a method I can use? Or is there a spray s I can diy recoat?
2 жыл бұрын
I tried. After about 7 hours of wetting toilet papers over my LG ERGO 32, the coating didn't moved nothing. Not even a little bit. I tried to force my nails to remove, and only made it to look ugly. Gladly it was only at the very corners and didn't affected image.
@maansa2477 ай бұрын
Same - I tried it on an LG 38uc99 and it didn’t work at all.. only managed to scrape of tiny bits on the corner.. so abandoned it.. maybe LG are using a special adhesive.
@MrSookonn7 ай бұрын
99% of people want to get rid of the glossy reflective coating on old monitors and this genius acts vice versa. Really useful.
@Deffine5 ай бұрын
Yes, some people want picture quality and not let it be destroyed by a matte coating.
@MrSookonn5 ай бұрын
@@Deffine Some people (less than 10) vs millions who hate reflecting mirrorpicture. No major manufacture sells glossy any more - why, because some people is not enough to produce.
@Deffine5 ай бұрын
@@MrSookonn Couldnt be more wrong. Every top model TV and pretty much all high end Apple products are fully glossy. Either you are reflection phobic or you care about picture quality to use your screen in a light controlled environment.
@MrSookonn5 ай бұрын
@@DeffineAgain all lies - they are semi glossy not glossy, dont write down nonsense. Go to your local store and you find zero glossy monitors.
@Deffine5 ай бұрын
@@MrSookonn They aren't semi glossy. Semi glossy = reflections that are diffused to different degrees, but not defined as with glossy. You have no idea who you are talking to. I have tested monitors and TVs since 2008. Yes, most of the screens in the store are semi-glossy, but the top models are not. All mobile phones and tablets have glossy screens because you need to pixels to be clear to be able to appreciate the high PPI (pixels per inch). Let me explain to you something, this is not a matter of opinion, ignoramus. Its a matter of fact that glossy screens are clearer, with more vibrant colors and even measurably brighter on the same panel (demonstrated by measurements after removing matte coating). Matte coating destroys PQ by distorting the pixels, making for a grainy/ oily picture that is unclear, it also traps light that reduces perceived contrast. All this is a consensus by now and demonstrated many times, you just need to google to find the evidence.
@obliviondio9 ай бұрын
use a steamer with distilled water instead this way if it penetrates to the inner electronics then it will just evaporate
@sonnyboy20262 жыл бұрын
Could you please put acetone on the matte layer that you removed and show what happens? I have glue on my monitor and I would like to know if acetone will damage it. (The last resort is removing the matte layer.) Thank you!
@jadeet49674 жыл бұрын
Can any monitor work for this? Does every monitor have an anti glare coating that people are able to remove. I’m trying to remove the after predator anti glare coating before I get the monitor.
@tomkosdiy4 жыл бұрын
It should have the coating, if the monitor is matte/partly matte and not glossy. You should be able to remove the coating the same way. If the monitor is new, it wont be coming off as easily as an older monitor and the film is most likely going to be thinner. It should be fine as long as you give it more time. Just remember, watch out for the film/coating. It is white. Do not remove the dark coating, that is polariser and you will ruin your display. Good luck
@arthurdinizcunha2 жыл бұрын
@@tomkosdiy bro, my monitor is polarized and i removed that layer, how can i fix it, can i find some polaried filter to replace it? DEL P2419H is the model! pleeeese help me, the screen keeps white all the time
@ahmadz78624 жыл бұрын
Thank you so much it worked for me in my laptop acer nitro 5 ❤️❤️❤️
@xAliSalar4 жыл бұрын
3er
@samir.kushwaha4 жыл бұрын
Did you remove the front plastic on the display panel?
@rachadballout8087 Жыл бұрын
Heat cannot be used is that correct?
@sz58763 жыл бұрын
You rule Tom!
@georgevogiatzis27152 жыл бұрын
wow in your before and after photos even the stand is more black. Lol..
@a.littlefaith2 жыл бұрын
This is a great tutorial, however, I am actually happy with my matte LG monitor, it doesn't bother me at all. Thanks for sharing though :)
@ytrew97174 жыл бұрын
why water? What does it do?
@tomkosdiy4 жыл бұрын
ytrew it loosens up the glue that holds the layer on the polariser
@ytrew97174 жыл бұрын
@@tomkosdiy thanks! By curiosity, how did you know the kind of glue they use?
@gytispranskunas49842 жыл бұрын
Im trying this on AOC monitor and after 4 hours of soaking nothing happened. One little corner seems to lift up but it's kinda ridged and don't want to go off
@rodelnevado3612 жыл бұрын
does every monitor has a anti glare can fill out?thanks
@GameFreakness2 жыл бұрын
Fyi this does work but mine took about 1 1/2 hours, also my soft touch buttons don’t work when I put it back together, don’t know why