How to Remove the Cigarette Lighter Panel on a 2014-2018 Toyota Corolla

Рет қаралды 10,312

Жыл бұрын

Cigarette lighter is not working? Need to hook up a dash cam to the wires behind the panel? Here's step by step how to remove the cigarette lighter panel on a 2014 Toyota Corolla.
⚠️ DISCLAIMER:
Use of the information in this video is solely at your own risk. The creator of this video assumes no liability for any property damage, injury or expenses incurred as a result of any of the information contained in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
The creator of this video makes no claims, promises or guarantees about the accuracy, completeness, or applicability of the procedures and instructions contained in this video.
Any injury, damage, or loss that might occur as a result of improper application, improper use of tools or equipment, or from the information contained in this video, is solely the responsibility of the viewer.

Пікірлер: 20

@CleverFix 22 сағат бұрын

If you enjoyed the video, please give it a *thumbs up* 👍. Your support helps me create more content and is *greatly appreciated* .

@carlosgomes7266 2 ай бұрын

Thank you!

@lunaticleone8534 Жыл бұрын

Damn so that's what those extra ports were for, heated seats...

@JuanLopez-wv2gy Жыл бұрын

Great video bro good job it help me out alot

@qit1 Жыл бұрын

Thank you 💗 Amazing

@CleverFix Жыл бұрын

You're welcome 😊

@sesebas127 Жыл бұрын

Hi i got a small question! Is it possible to change the fuel vapor canister by myself?

@rabudman Жыл бұрын

How can I upgrade my driver side master window switch to a "Auto UP and DOWN" on all windows? From the factory, only the drivers side is auto up AND down. Can I just replace the master switch with a master switch from a Camry that has auto up and down or is that function not located in the switch? Maybe that function is in the individual window motors or a relay somewhere? **Some Camry years are interchangeable with the Corolla switch. **

@rabudman Жыл бұрын

Liked and subed. I recently purchased a 2016 Corolla S. A common problem is the armrest loosens over time and wobbles from side to side. It's easily removed by unscrewing the 4 screws but the center piece of the plastic hinge wears out over time - causing the wobble. . A metal pin holds the hinge together. Question - How can the hinge be reinforced to stop the wobble?

@CleverFix Жыл бұрын

I am not sure how the hinge can be reinforced sorry.. I think the best way would be to replace it once it wears out. I would think the hinge shouldn't be too expensive.. or maybe you can find it at a junk yard.

@johnvictororeto5574 7 күн бұрын

Hi where can i buy the after market usb ports for this with the exact port cable

@CleverFix 7 күн бұрын

I am not aware of any aftermarket port with the exact cable. Check a junk yard, or the dealer. It should be very cheap at the yard.

@carmeloescano4609 Жыл бұрын

I have Toyota Corolla 2015, please help me how to remove center hand rest, its so already faded and messy. I wanna change the cover by myself, I'm experienced upholsterer. Thank you.

@CleverFix Жыл бұрын

Sorry I just saw your message, maybe you figured it out by now, I think what you're asking is simple. You want to remove just the small lid that covers the center compartment?

@jmaverick0807 Жыл бұрын

I know how to do this , but how do I completely remove the cigarette lighter. Is there a tool to use ?

@CleverFix Жыл бұрын

Sorry I'm not sure, did you try pushing it from behind toward the front? Usually there are some clips/plastic tab, that hold it from coming out, and they need to be pressed down to release it.. Did you figure it out?

@jmaverick0807 Жыл бұрын

@@CleverFix actually I figured it out. The electrical connector has clips on the side , I popped them off and the connector came off then a small bolt and nut held the rest of it together and the whole thing came apart once I got the nut off. Thanks for the feedback.

@chungkingcansuckit6345 Жыл бұрын

Thanks for the help.. I got everything off, but I'm stuck on MY last step which your video doesn't cover.. how to get the 12v socket out? I need that replaced I think.

@CleverFix Жыл бұрын

There's another comment, someone asked about that, and then he eventually got it out.. Look for that comment, and maybe he can respond if you have any questions.. Try some u-pull it junk yards if possible, maybe you can get the entire part and practice on it. They usually don't care about this part and leave it on.