Thanks so much for this video. I have a 2018 Maxima and was able to fix what I needed because of this video. I had my car parked with the bumper just slightly above the sidewalk. I picked up a few friends which made the car heavier. While backing out I heard a loud scraping and popping sound. It literally sounded like my bumper fell off but upon giving it a quick glance, it was still in place. A day or two later, my front passenger parking sensor was beeping intermittently despite there being no obstructions in front of it. I took a closer look and noticed that both my parking sensor and the fog light below it had come off their housing. This video undoubtedly saved me hundreds of dollars as I was able to remove the bumper myself, reattach the fog light onto its assembly, and stick the parking sensor back on. Something to note that I did not see in your video is that my car had a styrofoam buffer in between the bumper and the steel frame of the car. So when I removed the bumper, it fell out. Something to keep an eye on for those of you planning to remove the bumper. Thanks again for the video!
@plewis2134 Жыл бұрын
This is my issue. Thank you! All you had to do was snap it back in? I was thinking something broke. It's worth taking off the bumper to see.
@abdielmejia94683 жыл бұрын
Finally ! Someone doing a maxima ... Hey man thanks for uploading this vid... I hit a deer and it destroyed only my front grille and I’m actually replacing it today myself... this vid was definitely a blessing !
@Chrizleyva3 жыл бұрын
Glad you found it useful 🙌
@pascualgarcia4373 жыл бұрын
I’m going through the same thing right at this moment. found this video and comment. Did you have to remove the entire bumper to swap the grille?
@andrewdunaf74342 жыл бұрын
Yooo I hit a deer 2 days ago on my maxima
@abdielmejia94682 жыл бұрын
@@andrewdunaf7434 lmao welcome too the club ?!
@camarontufts39632 жыл бұрын
So thankful for this video. I just needed to remove the grill but great video to show not only that but changing headlights and fog lights. Nice video. No BS. Straight to the point. Thanks
@os81142 жыл бұрын
Just changed out my broken headlight and fog light. Thank you for this video, it was VERY helpful. Greatly appreciated!
@Chrizleyva2 жыл бұрын
Glad I could help 🙌
@robertyoung86152 жыл бұрын
Anyone if you are looking to do this to just reattach your foglight that may be loose you can take off just that first bolt on each side of the bumper and the end of the splash guard on each side. This should allow you to stick a skinny arm in there enough to reattach it. The bumper will pull off up to the middle grill after removing just that single bolt on each side of it. It will take some twisting and turning for each part you may need to get attached. I had one side that was quick and easy and the other took about 20 minutes to get entirely attached. The clip closest to the middle on the foglight is the most difficult imo but it was the last one I did. I had to lift the bumper up as i pulled the arm of the foglight towards me and push both together at the same time. You'll know you got it on these clips when you hear it pop in place. They do not all have to be reattached at the same time. Do one at a time with the limited space you're working with. Of course it will be easier to attach if you wind up deciding to remove the entire bumper.
@L0w5ive10 ай бұрын
literally my issue that I have now . My passenger side fell off/ pushed in, so I was looking to see how I can fix it on my own.
@robertyoung861510 ай бұрын
@@L0w5ive I wish you the best of luck. One issue I did have is with what the bumper clips into. My buddy was a little aggressive on his side after removing the bolt so by bumper never sat back properly and would slide off on that side so be careful with that aspect. Thankfully I sold it a year ago so its someone else's problem now 🤣
@cuh7203 жыл бұрын
I’m replacing my dogs soon. Mine have condensation inside and I need to air them out and reseal. You sir are the GOAT
@AyoBaby2 жыл бұрын
Thans for the video bro! This morning, I dropped my bumper, reinstalled a sunken parking sensor, and installed some LED fogs.
@jeffhenjes17222 жыл бұрын
I removed my '17's bumper to put LED's in the fogs and LED high beams in the headlights. It isn't that bad to get the bumper off at all, just take your time and keep stuff organized in order you took it off to put it all back on again. I also had no help but I did drop the bumper onto a big piece of bed topper foam to cushion it and keep it from getting scratched. You also may be horrified to see how unsubstantial a modern car is in the front end and why it's so easy to damage one in a front end collision, almost nothing there.
@michaelrjohnson37222 жыл бұрын
Man just change my lights yesterday thank you so much for taking the time to do this Video Really appreciate save me some money thanks
@Birdmanhtown9 күн бұрын
Thanks for doing this video. Im going to replace my fog light my is to yellow inside the light fog
@Thegreatto23 жыл бұрын
Finally a front bumper removal, if you can do a rear bumper removal your goated 👀 please and thank you
@sanjuandiaz Жыл бұрын
This vid is much appreciated bruh. I've got a '16 and my fogs have collected a bunch of water/condensation and I want to change them out but didn't know how to...now I do. 👍🏾👍🏾
@Chrizleyva Жыл бұрын
Glad you found it useful 👍
@sanjuandiaz11 ай бұрын
FYI...U didn't mention anything about the sensors needing to be unplugged, or the foam & flaps inside. Or the wiring needing to be removed from the foglight housing. Luckily, I was smart and patient enough to figure it out. Maybe do an edited vid, adding those lil tidbits. Us amateurs need all the help we can get from those much more knowledgeable and qualified, that's why we're on here in the 1st place
@sanjuandiaz11 ай бұрын
@@Chrizleyvaread above...
@arturoyescas417511 ай бұрын
thanks!! you saved me a few hundo
@charlesdenoncour91022 ай бұрын
Great, very helpful video... Thanks for posting it.
@fahadalahdal80123 ай бұрын
Thanks so much for making this video
@Greg3468 Жыл бұрын
Great vid man. Appreciate you uploading this. I just bought a 2017 Maxima and would like to replace the halogen headlight bulbs with something like LED’s or whatever will project a whiter light. I was thinking about doing the fog lights as well but removing the bumper is something I’d rather not do although I will if I have to and your video was helpful in knowing what I’ll be getting into if I decide to.
@Chrizleyva Жыл бұрын
Glad this was useful 🙌
@MATRIXRAIN2 жыл бұрын
I’m going to be putting on my custom headlights so this was helpful thanks
@ghettoghost26573 жыл бұрын
Thanks for this bro my front sonar fell into the bumper this helped a lot i will try to fix it today
@Chrizleyva3 жыл бұрын
Glad I could help 🙌
@A.Quintanilla2 жыл бұрын
I'm trying to see about replacing my door handles that are Chrome on my 2017 Nissan Maxima Sr midnight edition with the black handles that come on the newer gens can you make a video like that if possible? I'm trying to do a swap to match the color
@chrishorton39636 ай бұрын
Man I really appreciate your video. I'm in a spot now where I am replacing the bumper cover. Where did you order the color matched bumper. All I can find is primed
@AJ-nw8vk Жыл бұрын
Made my next project very easy. Thanks
@Chrizleyva Жыл бұрын
🙏🙏
@Cartielll3 жыл бұрын
Amazing video bro keep up the maxima video🔥
@Chrizleyva3 жыл бұрын
🙌🙌🙌
@skg5067 Жыл бұрын
Your a great help
@chefrolle28652 жыл бұрын
Thanks bro 💪🏾I had the same issue this help’s a lot
@joselara9513 ай бұрын
Great vid bro,,might u have link for the clips that attached to the bumper to headlights that u pointed out?
@jordanurbina9672 жыл бұрын
Awesome video brother man helped me out a lot thanks.
@fredycuevas415 күн бұрын
What wheels do you have on that maxima ? They’re clean !
@elimartinez74952 жыл бұрын
Thanks brotha...this video helped a lot.
@turk1031521 күн бұрын
I am trying to replace the low beam bulb with a new LED bulb, but I cant get access to the low beam bulb, only the high beam. Will removing the bumper than the light allow me to access the low beam bulb?
@joefloyd6606 Жыл бұрын
Thanks this was great, much appreciated!!
@fabiansantamaria64533 жыл бұрын
You should make a video on how to replace DRL amber lights
@nativetowing6460 Жыл бұрын
Can I remove just the fog light easy the Mirror housing inside is cracked and I can’t put pressure on to screw in fog bulb
@christopherbennett3302 ай бұрын
Great vid. Same vehicle except 2016. Nissan wants ridiculous money for these light assemblies and replacement. Are those replacement lights CAPA or after market and have you had any issues with them if they are after marke? Especially fitting. Made that look easy. Did you record the re-install of the bumper? If so can you post it or advise of any watch outs during the process. Great vid.
@ChrizleyvaАй бұрын
We have had no issues and I didn't record reinstalling sorry mate
@jamekeonmccray54545 ай бұрын
Thanks a mill
@carlogonza11263 жыл бұрын
Very clear video
@antb78143 жыл бұрын
Hey, I appreciate this video. Would you be able to post the link to where you get your parts
@Chrizleyva3 жыл бұрын
I only have a link for the driver side headlight I updated the description. As for the fog light I purchased it locally
@A.Quintanilla2 жыл бұрын
Ok sooo....what about, 2021 headlight housing and fitting it to a 2017.... Do bolt line up and would it need a wiring harness?
@SakoiFish Жыл бұрын
Ty so much
@carlogonza11263 жыл бұрын
Bro you are the man
@Chrizleyva3 жыл бұрын
🙌🙌🙌
@reggie231 Жыл бұрын
Thank you for this !!
@Chrizleyva Жыл бұрын
🙏🙏🙏
@skg5067 Жыл бұрын
Thank you for this
@stephensanchez4755 Жыл бұрын
Great video. Maybe you can help me out do I have to remove the bumper to find the front radar sensor ? 17 maxima platinum.
@traumamed9449Ай бұрын
Late answer I know, but the answer is yes.
@nevermind2923 Жыл бұрын
Do the fog lights come l.e.d. as well?
@carlogonza11263 жыл бұрын
Im interested in swapping my front bumper with a 2019 bumper I have a 2017 max
@charlesyoung72633 жыл бұрын
Let me know how that goes I want to do the same for mine and back bumper also with duel exhaust
@alvarez99la493 жыл бұрын
I did it i have a 2017 and put the 2019 front bumper and headlights
@Pdep903 жыл бұрын
@@alvarez99la49 how was it? Was everything plug and play?
@ChinoEEE2 жыл бұрын
@@Pdep90 yes it’s all plug and play
@ChinoEEE2 жыл бұрын
@@Pdep90 for the headlights you’ll need an adapter
@johnepperson64342 жыл бұрын
Thank you
@Superlovo3 жыл бұрын
Great job!!
@Chrizleyva3 жыл бұрын
Appreciate it 🙌
@pmb-lq5tzАй бұрын
nice
@plewis2134 Жыл бұрын
My sensor fell down and come to find out it is because the fog light fell down. The dealership is saying that I need a whole new bumper. From seeing this video, I don't see anything else holding up the light but the bumper. Is that the case? Would I have to get a whole knew bumper? I have not had a wreck or anything, so not sure why it fell down. I didn't realize there wasn't a bracket holding it in until your video. I was just going to buy a new fog light assembly. I have a 2018, but I believe it is built the same.
@Chrizleyva Жыл бұрын
If you still have the bracket you could just jbweld it or plastic weld it
@bigmoo_da_creoleking35313 жыл бұрын
Thanks, I appreciate you
@Chrizleyva3 жыл бұрын
🙌🙌🙌
@andrewdunaf74342 жыл бұрын
What kind of wheels are on your maxima?
@iamdzoe98172 жыл бұрын
Nice Appreciate that
@A.Quintanilla2 жыл бұрын
....what kind of bulb (fog light) did you have that caused the heat damage?
@Chrizleyva2 жыл бұрын
Honestly I'm not sure it wasn't my car sorry
@tristan78442 жыл бұрын
Do you where I can get led it bulbs for this Maxima? I notice there are two bulbs for each headlight
@sanjuandiaz Жыл бұрын
I put these in my headlights/foglights...SUPER bright & clean
@rtreyy3923 жыл бұрын
How much you want for that fog light the one you too off
@edwardb650 Жыл бұрын
You don't have to actually remove the bumper. Just remove the screws from the side you need to work on and all the bottom screws.There is enough of play in the Bumper to access the headlight screws without lifting the bumper completely off..when putting the head,ight back ,if someone is available they can just pull the bumper out slightly to allow access. Before you reassemble plug the light socket in to be sure the new or repaired unit works.
@Chrizleyva Жыл бұрын
Did it for demonstrating purposes
@Abel32702 жыл бұрын
How much should I charge someone to do this?
@skylynx1213 жыл бұрын
How long does it take to remove and install the bumper?
@Chrizleyva3 жыл бұрын
Depends usually 15 mins
@skylynx1213 жыл бұрын
@@Chrizleyva When putting the bumper back on can one person put it back or does it take two?
@dltsfyonline3 жыл бұрын
yo i need help can i contact you?
@jewelzsawyers78033 жыл бұрын
What are you doing today. Can you please send step by step to ho
@jewelzsawyers78033 жыл бұрын
Contrach
@slbgeo2 ай бұрын
I respect my car more than to put the bumper cover on bare concrete! No towels to go under?
@tay99318 ай бұрын
I broke the clips at 3:04 💀
@CarlosHernandez-db8er3 жыл бұрын
There trying to charge me 138 to install a head light
@Chrizleyva3 жыл бұрын
Yeah thats quite a lot better off doing it on your own
@fatmahouston40393 жыл бұрын
I noticed you in az can you help me on my 16 maxima please I. Can pay you
@Chrizleyva3 жыл бұрын
Yeah i can help you if you have Instagram message me there at chrizleyva